TANNOY 3 Way 6″ In-Wall Loudspeaker White Installation Guide
- June 7, 2024
- TANNOY
Table of Contents
TANNOY 3 Way 6″ In-Wall Loudspeaker White
Designed to excel in a wide variety of sound reinforcement applications, the
full range iW 62DS-WH is a compact 320-Watt wall mount loudspeaker that
provides inspiring acoustic performance with exceptional clarity and
articulation. The iW 62DS-WH is ideally suited for paging systems, boardrooms,
offices, business music systems, reception rooms, houses of worship, retail
outlets, shopping malls and bars.
Specifications
- 3 way compact wall mount loudspeaker for multi-zone music and AV systems
- 25 mm titanium diaphragm high frequency unit delivers exceptional clarity and articulation throughout the high frequency range
- 2 x 6″ bass drivers provide exceptional low frequency performance
- 80 Watts continuous, 320 Watts peak power handling delivers exceptional dynamics and realism
- Highly efficient 92 dB/Watt sensitivity
- WideBand tweeter technology to enhance reproduction of wide band digital audio formats # Robust construction and performance allows use within commercial environments
- Ideal for paging systems, boardrooms, offices, business music systems, reception rooms, houses of worship, retail outlets, shopping malls and bars
- Weather resistant steel mesh grille to protect driver
- Semi matt white finish fits unobtrusively in any environment
- Both baffle and grille may be painted to match décor
- Innovative self-aligning clamping system for easy installation into standard stud partition wall
- Bi-wireable to improve signal transmission and integrity
- Driver ground connection minimises RF interference Dynamic high frequency protection
- Tannoy – Over 90 years of British sound heritage and innovation
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
Superb Performance
iW 62DS-WH’s design comprises dual 150 mm (6.00″) bass drivers with a 25 mm
(1.00″) titanium diaphragm high frequency unit mounted in an enclosure that is
robust enough for commercial applications. This configuration handles up to
320 Watts to deliver exceptional dynamics, realism, and enhanced
intelligibility, all in a compact and highly efficient system that is well-
suited to a wide range of amplifier options – including entry level
amplifiers.
Attractive & Easy to Install
The semi matt white, weather resistant grille and enclosure can be painted to
match any décor, and features an innovative self-aligning clamping system for
easy installation into standard stud partition walls.
You Are Covered
We always strive to provide the best possible Customer Experience. Our products are made in our own Music Tribe factory using state of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world. As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous Warranty program.
Frequency Response Sensitivity 1 W / 1 m
Impedance
Horizontal and Vertical Beamwidth
Directivity Index and Factor
Horizontal Polar Plots
Vertical Polar Plots
Dimensions
Technical Specifications
Performance
| Frequency response (±3 dB) | 70 Hz – 20 kHz |
|---|---|
| Frequency response (-10 dB) | 34 Hz – 20 kHz |
| Low frequency alignment (-6 dB) | 34 Hz |
| Power handling (see note 1) | 80 W continuous, 320 W peak |
| Recommended amplifi er power | 20 – 160 W @ 8 Ω |
| System sensitivity | 92 dB (2.83 V @ 1 m) |
| Nominal impedance | 8 Ω |
| Rated maximum SPL | 111 dB continuous, 117 dB peak |
| Crossover | Passive, 2nd order LF, 1st and 2nd order band-pass mid, 2nd |
order HF
Crossover point| 500 Hz, 1.5 kHz
Crossover HF adjustment| ±1.5 dB
Transducers
| High frequency | 25 mm (1″) 25-micron titanium dome, neodymium magnet system |
|---|---|
| Low frequency | 2 x 165 mm (6.5″) multifibre paper pulp cone |
| Wiring | Positive LF, positive HF, negative LF, negative HF, ground |
Physical
| Dimensions (H x W x D) | 473.5 x 227 x 92 mm (18.6 x 8.9 x 3.6″) |
|---|---|
| Mounting depth | 99 mm (3.9″) |
| Net weight | 4.2 kg (9.3 lb) |
| Construction | Baffle panel: moulded UV Resistant ABS, Clamps: moulded |
polycarbonate
Finish| White, paintable
Grille| Powder coated perforated steel
Notes
- Long-term power handling capacity as defined in IEC standard IEC268-5
- Averaged over specified bandwidth for half space environment. For anechoic conditions the figure is to be decreased by 3 dB
- ± 3 dB, measured at 1 metre in anechoic chamber in a critically tuned enclosure.
- Remove links when bi-Amping or bi-wiring
- Remove links in stereo operation
Architecture & Engineering Specifications
The in-wall speaker shall consist of two 165 mm (6.50″) bass/mid units and one 25 mm (1.00″) high frequency driver mounted in an injection moulded front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The three- way system shall incorporate an optimised low loss crossover network. The wiring terminals shall be screw terminal connectors.
Performance of the in-wall speaker shall meet or exceed the following criteria: The system shall have a coverage angle of 130 x 90 degrees (1 kHz to 6 kHz). Frequency response measured on axis shall be 34 Hz – 20 kHz (-10 dB from rated sensitivity, measured in an IEC baffle in an anechoic chamber) with no equalization. Sensitivity shall be 92 dB (1 W @ 1 m). Long term power handling capacity as defined in EIA-426B test shall be 80 W, recommended amplifier power 160 W @ 8 Ohms. The nominal system impedance shall be 8 Ohms.
A weather resistant perforated steel grille covers the transducer. Both the grille and baffle shall be paintable. The system shall not exceed the following dimensions: 473.50 x 227 x 92 or 18.6 x 8.9 x 3.6 (H x W x D). Hole cut out size shall be 426.10 x 187.6mm (16.76 x 7.39″)
The Tannoy in-wall speaker system shall be the…..iw62 DS-WH
For service, support or more information contact the Tannoy location nearest you:
Europe
Music Tribe Brands UK Ltd.
Tel: +44156 273 2290
Email: CARECrea@musictribe.com
CAREEnte@musictribe.com
CARELife@musictribe.com
USA/Canada
Music Tribe Commercial NV Inc.
Tel: +1 702 800 8290
Email: CARECrea@musictribe.com
CAREEnte@musictribe.com
CARELife@musictribe.com
Japan
Music Tribe Services JP K.K.
Tel: +81 3 6231 0453
Email: CARECrea@musictribe.com
CAREEnte@musictribe.com
CARELife@musictribe.com
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2019 All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>