BOSS Bluetooth 3″ 76 mm Weather SpeakerAmplifier System Featuring Amplifier User Manual
- June 7, 2024
- Boss
Table of Contents
BOSS
3″ (76 mm) Weather Rated Speaker And Amplifier System
Model: MC475BA
Featuring Built-in Amplifier
Congratulations on your purchase of a BOSS Audio Systems amplified speaker system.
It has been designed, engineered and manufactured to bring you the highest level of performance and quality, for years of listening pleasure.
Thank you for making BOSS AUDIO SYSTEMS your choice for entertainment!
Specifications
- Operation Voltage: 10 ~ 1 6 V
- TH D: <O .1 %
- SIN: > 7 5 dB
- Channel Separation: >50 dB
- Frequency Response: SO Hz – 1 SKHz
- Master Speaker Wires: 5.5′
- Slave Speaker Wires: 4.6′
- Volume Control Wire: 4.9′
- Audio Input Cable: 0.8′
- Power Cable: 5.5′
- In-Line Fuse/Power Cable: 4.9′
- Bracket Size Range: 0.75″ ~1.25″
- Fuse Rating: 1 0A
Features:
- On/Off Switch
- Aux-In (3.5 mm)
- Speaker Clamp Mounts
- Weatherproof Volume Control
- High-Impact, High Temp Speaker Enclosures Weatherproof Speakers
- Bluetooth® Audio Streaming
Installation
- Screw the brackets to the bottom of the speakers.
- Find a safe, ideal mounting location and fit the brackets over the chosen mounting bars.
- Fasten the mounting screws after you review the safety of the mounting location.
Wiring
- Remove the seat.
- Route the fused power leads to the battery. (keep away from moving parts and/or hot exhaust)
- Connect the RED ring terminal to the+ 12V post of the battery.
- Connect the BLACK ring terminal to ground post of the battery.
- Connect the power connector to the white mating connecter leading to the speaker.
Power Switch
- The switch is used to Power On/off the system.
- It can be mounted near the volume control for easy access.
- Reinstall the seat.
Connections
Amplifier and Loudspeaker Mounting
Install Reminder
The components and wiring should not be installed around any moving parts, keep away from ignition parts, fuel lines, or any hot exhaust Speakers should not be installed where they might inhibit safety features on the vehicle (i.e. lights, horns, brake levers, etc.
Bluetooth
To pair and connect your Bluetooth device to the MC475BA Enter Settings> Bluetooth Menu> Search> ” Boss Audio MC475BA” >If Prompted to enter a passcode enter: “0000”
BOSS Audio Systems
Lunar Court. Oxnard, CA 93030
www.bossaudio.com
805-751-4853 Customer Service
Tech Support: www.bossaudio.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>