Euromaid 269L Top Mount Refrigerator User Manual

June 7, 2024
Euromaid

Euromaid logo

User Manual

269L Top Mount Refrigerator
ETM269S
ETM269W

euromaid.com.au

Safety information


In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.
For the safety of life and property keep the precautions of these user’s instructions as the manufacturer is not responsible for damages caused by omission.

Children and vulnerable people safety

  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Cleaning and user maintenance shall not be made by children.
  • Keep all packaging well away from children. There is risk of suffocation.
  • If you are discarding the appliance pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent playing children to suffer electric shock or to close themselves into it.
  • If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lack unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child.

General safety
WARNING! Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING! Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING! Do not damage the refrigerant circuit.

1

WARNING! Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances, unless they are approved for this purpose by the manufacture.

WARNING! Do not touch the light bulb if it has been on for a long period of time because it could be very hot.¹)

  • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

  • The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable.

  • During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged.
    – avoid open flames and sources of ignition
    – thoroughly ventilate the room in which the appliance is situated

  • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short circuit, fire and/or electric shock.

  • This appliance is intended to be used in household and similar applications such as
    – staff kitchen areas in shops, offices and other working environments;
    – farm houses and by clients in hotels, motels and other residential type environments;
    – bed and breakfast type environments;
    – catering and similar non-retail applications.

WARNING! Any electrical components (plug, power cord, compressor and etc.) must be replaced by a certified service agent or qualified service personnel.

WARNING! The light bulb supplied with this appliance is a “special use lamp bulb” usable only with the appliance supplied. This “special use lamp” is not usable for domestic lighting.¹)

  1. If there is a light in the compartment.

2

  • Power cord must not be lengthened.
  • Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire.
  • Make sure that you can come to the mains plug of the appliance.
  • Do not pull the mains cable.
  • If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.
  • You must not operate the appliance without the lamp.
  • This appliance is heavy. Care should be taken when moving it.
  • Do not remove nor touch items from the freezer compartment if you hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.
  • Avoid prolonged exposure of the appliance to direct sunlight.
Daily use
  • Do not put hot on the plastic parts in the appliance.
  • Do not place food products directly against the rear wall.
  • Frozen food must not be re-frozen once it has been thawed out.¹)
  • Store pre-packed frozen food in accordance with the frozen food manufacture s instructions.¹)
  • Appliance’s manufactures storage recommendations should be strictly adhered to. Refer to relevant instructions.
  • Do not place carbonated of fizzy drinks in the freezer compartment as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance.¹)
  • Ice lollies can cause frost burns if consumed straight from the appliance.¹)
Care and cleaning
  • Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.
  • Do not clean the appliance with metal objects.
  • Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.¹)
  • Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean the drain. If the drain is blocked, water will collect in to bottom of the appliance.²)
  1. If there is a freezer compartment.
  2. If there is a fresh-food storage compartment.

3

Installation

Important! For electrical connection carefully follow the instructions given in specific paragraphs.

  • Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.
  • It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor.
  • Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation follow the instructions relevant to installation.
  • Wherever possible the spacers of the product should be against a wall to avoid touching or catching warm parts (compressor, con-denser) to prevent possible burn.
  • The appliance must not be located close to radiators or cookers.
  • Make sure that the mains plug is accessible after the installation of the appliance.
Service
  • Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person.
  • This product must be serviced by an authorized Service Center, and only genuine spare parts must be used.
  • WARNING! – It is hazardous for anyone other than an Authorised Service Person to service this appliance. In Queensland, the authorised Service Person MUST hold a Gas Work Authorisation for hydrocarbon refrigerants, to carry out Servicing or repairs where the gas system is being opened or charged.
  • This appliance contains R600a refrigerant which is flammable.
Energy saving
  • Don’t put hot food in the appliance;
  • Don’t pack food close together as this prevents air circulating;
  • Make sure food don’t touch the back of the compartment(s);
  • If electricity goes off, don’t open the door(s);
  • Don’t open the door(s) frequently;
  • Don’t keep the door(s) open for too long time;
  • Don’t set the thermostat on exceeding cold temperatures;
  • Some accessaries, such as drawers, can be removed to get larger storage volume and lower energy consumption.

4

Environment Protection
This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The insulation foam contains flammable gases: the appliance shall be disposed according to the appliance regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially the heat exchanger. The materials used on this appliance marked by the symbol are recyclable.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

Packaging materials
The materials with the symbol are recyclable. Dispose the packaging in a suitable collection containers to recycle it.

Disposal of the appliance

  1. Disconnect the mains plug from the mains socket.
  2. Cut off the mains cable and discard it.

5

Overview


Euromaid 269L Top Mount Refrigerator OverviewFreezer Compartment, Shelf, Door Shelves, Shelves

Note: Above picture is for reference only. The actual appliance maybe slightly different.

6

Reverse Door


Before reversing the door, please be prepared below tools and material: straight screwdriver, cross screwdriver, spanner and the components included in the poly bag:

1. Close upper door, take out the screw from the top hinge covers by cross screwdriver.
Take off hinge cover, then unscrew top hinge and take off upper door.

Reverse Door 1A  Reverse Door 1B

Unplug the temperature sensor from inside the top hinge cover and put the sensor back into the unit as shown below. Remove the door carefully and safely place to protect it from damage.

Reverse Door 2A   Reverse Door 2B

2. Unscrew from the middle hinge by cross screwdriver, then take off the lower door.

Reverse Door 3

7

3. Laying down the refrigerator, take out the adjusting feet as below, then unscrew the lower hinge by cross screwdriver.

Reverse Door 3A

4. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

Reverse Door unscrew 4A   Reverse Door screw
4B

5. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet. Transfer the lower door to the property position.

Reverse Door screw 5

8

6. Make the middle hinge reverse the direction 180°C, then transfer it to the left property position. Make the middle hinge pin in the upper hole of the lower door, then tight the screws.

Reverse Door 6

7. Install the upper door, fix the upper door hinge onto the cabinet.

Reverse Door 7

8. Take left hinge cover from accessary bag and install it with top hinge. Then install hole cover at right side.

Reverse Door 8

9

Installation


Space Requirement
  • Select a location without direct exposure to sunlight;
  • Select a location with enough space for the refrigerator doors to open easily;
  • Select a location with level (or nearly level) flooring;
  • Allow sufficient space to install the refrigerator on a flat surface;
  • Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.

 Installation Space Requirement Installation Space Requirement A

10

Positioning

Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance:

Climate class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
Location

The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabi-net and the wall unit must be at least 50 mm. Ideally, however, the appliance should not be positioned below overhanging wall units. Accurate leveling is ensured by one or more adjustable feet at the base of the cabinet.

Warning! It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not observed. This appliance complies with the E.E.C. Directives.

Levelling the refrigerator

Levelling the unit

To do this adjust the two levelling feet at front of the unit.

If the unit is not level, the doors and magnetic seal alignments will not be covered properly.

Levelling the Refrigerator

11

Daily Use


Using the Control Panel

Freezer compartment Temperature Setting

  • Plug on your appliance. There are 3 settings: COLD, COLDER and COLDEST.
  • The appliance may not operate at the correct temperature if it is in a particularly hot or if you open the door often.

Using the Control Panel

  • Temperature range for freezer compartment: -20<T≤-15°C

Fridge compartment Temperature Setting

  • Plug on your appliance. There are 4 settings: OFF, COLD, COLDER and COLDEST. COLD is warmest setting and COLDEST is coldest setting, OFF is off.
  • The appliance may not operate at the correct temperature if it is in a particularly hot or if you open the door often.
  • Neither fridge or freezer compartment works when the setting is OFF.

Using the Control Panel A

  • Temperature range for fridge compartment: 0<T≤9°C

(Note: above temperature range is average temperature for reference only.)

12

First use

Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly.

Important! Do not use detergents or abrasive powders, as these will damage the finish.

Daily use

Freezing fresh food

  • The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time.
  • Place the fresh food to be frozen in the top compartment.

Storing frozen food
When first starting-up or after a period out of use, before putting the product in the compartment let the appliance run at least 2 hours on the higher settings.

Important! In the event of accidental defrosting, for example the power has been off for longer than the value shown in the technical characteristics chart under “rising time”, the defrosted food must be consumed quickly or cooked immediately and then re-frozen (after cooked).

Thawing
Deep-frozen or frozen food, prior to be used, can be thawed in the fridge compartment or at room temperature, depending on the time available for this operation.
Small pieces may even be cooked still frozen, directly from the freezer. In this case, cooking will take longer.

Accessories
Movable shelves
The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.

Movable shelves

Positioning the door shelves
To permit storage of food packages of various sizes, the door shelves can be placed at different heights. To make these adjustments proceed as follows: gradually pull the door shelves in the direction of the arrows until it comes free, then reposition as required.

Positioning the door shelves

13

Helpful hints and tips

Hints for freezing

To help you make the most of the freezing process, here are some important hints:

  • only freeze top quality, fresh and thoroughly cleaned, foodstuffs;
  • prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required;
  • wrap up the food in aluminium foil or polythene and make sure that the packages are airtight;
  • do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter;
  • lean foods store better and longer than fatty ones; salt reduces the storage life of food;
  • water ices, if consumed immediately after removal from the freezer compartment, can possibly cause the skin to be freeze burnt;
  • it is advisable to show the freezing in date on each individual pack to enable you removal from the freezer compartment, can possibly cause the skin to be freeze burnt;
  • it is advisable to show the freezing in date on each individual pack to enable you to keep tab of the storage time.

Hints for storage of frozen food
To obtain the best performance from this appliance, you should:
make sure that the commercially frozen foodstuffs were adequately stored by the retailer;
be sure that frozen foodstuffs are transferred from the food store to the freezer in the shortest possible time;
not open the door frequently or leave it open longer than absolutely necessary.
Once defrosted, food deteriorates rapidly and cannot be refrozen.
Do not exceed the storage period indicated by the food manufacture.

Hints for fresh food refrigeration
To obtain the best performance:

  • Do not store warm food or evaporating liquids in the refrigerator
  • Do cover or wrap the food, particularly if it has a strong flavour

Hints for refrigeration
Useful hints:

  • Make (all types): wrap in polythene bags and place on the glass shelves above the vegetable drawer.
  • For safety, store in this way only one or two days at the most.
  • Cooked foods, cold dishes, etc…: these should be covered and may be placed on any shelf.
  • Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawer(s) provided.
  • butter and cheese: these should be placed in special airtight containers or wrapped in aluminum foil or polythene bags to exclude as much air as possible.
  • Milk bottle: these should have a cap and should be stored in the balconies on the door.
  • Bananas, potatoes, onions and garlic, if not packed, must not be kept in the fridge.

14

Cleaning
For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly.

Caution! The appliance may not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse. Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components, danger of electrical shock! Hot vapors can lead to the damage of plastic parts. The appliance must be dry before it is placed back into service.

Important! Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice form orange peel, butyric acid, cleanser that contain acetic acid.

  • Do not allow such substances to come into contact the appliance parts.
  • Do not use any abrasive cleaners
  • Remove the food from the freezer. Store them in a cool place, well covered.
  • Switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker of fuse.
  • Clean the appliance and the interior accessories with a cloth and lukewarm water. After cleaning wipe with fresh water and rub dry.
  • After everything is dry place appliance back into service.
Setting the humidity in the Crisper:
  • Low humidity: move the regulator to the left
  • High humidity: move the regulator to the right

Fruits LOW Vegetables

15

Troubleshooting

Caution! Before troubleshooting, disconnect the power supply. Only a qualified electrician Or competent person must do the troubleshooting that is not in this manual.

Important! There will be some sound/noise during normal operation (compressor or refrigerant circulation).

Problem Possible cause Solution
Appliance does not work Mains plug is not plugged in or is loose Insert

mains plug.
Fuse has blown or is defective| Check fuse, replace if necessary.
Socket is defective| Mains malfunctions are to be corrected by an electrician.
Appliance freezes or cools too much| Temperature is set too cold| Turn the temperature regulator to a warmer setting temporarily.
The food is not frozen enough.| Temperature is not properly adjusted.| Please look in the initial Temperature Setting section.
Door was open for an extended Period.| Open the door only as long as necessary.
A large quantity of warm food was placed in the appliance within the last 24 hours.| Turn the temperature regulation to a colder setting temporarily.
The appliance is near a heat source.| Please look in the installation location section.
Heavy build up of frost on the door seal.| Door seal is not air tight.| Carefully warm the leaking sections of the door seal with a hair dryer (on a cool setting). At the same time shape the warmed door seal by hand such that it sits correctly.
Unusual noises| Appliance is not level.| Re-adjust the feet.
The appliance is touching the wall or other objects.| Move the appliance slightly.
A component, e.g. a pipe, on the rear of the appliance is touching another part of the appliance or the wall.| If necessary, carefully bend the component out of the way.

If the malfunction shows again, contact the Service Center.

16

Product Information

Model No.:               ETM269W, ETM269S
Product dimension:  W550 x D600 x H1670 mm

Gross volume:     269L
Storage volume:   251L

220 – 240V a.c.               50Hz
Rated current:                1.2A
Defrost power:               150W
Climate class:                   T
Energy consumption:      0.904kW.h/24h
Refrigerant:                      R600a(52g)
Insulation blowing gas:    CyclopentaneProduct
InformationCOMPRESSOR, STARTER, PROTECTOR, R_SENSOR, DOOR SWITCH, LAMP

C*: The capacitor is optional according to different compressor model

17

NOTES







MANUFACTURER GUARANTEE

This warranty is provided in Australia by Glen Dimplex Australia Pty Limited ABN 69 118 275 460 ( Phone number 1300 556 816 ) and in New Zealand by Glen Dimplex New Zealand Limited NZBN 9429000069823 ( Phone number 09 274 8265 ) in respect of the Euromaid product.

1. Euromaid Express Warranty

Subject to the exclusions below, we warrant that the product will not have any electrical or mechanical breakdowns within:

a) In the case of Euromaid products used for personal, domestic or household purposes, a period of 2 years from the date the product is purchased as a brand-new product from a retailer located in Australia / New Zealand.

b) In the case of Euromaid products used for purposes other than personal, domestic or household purposes (including business or commercial use), a period of 90 days from the date the product is purchased as a brand-new product from a retailer located in Australia / New Zealand. Euromaid products are designed and intended for domestic use only; and

c) All warranty repairs must be carried out by Glen Dimplex or their nominated service agent

Note: warranty periods detailed above may vary in line with agreements with select retail and builder partners and may differ between Australia and New Zealand.

The benefits conferred by this express warranty are in addition to the Consumer Guarantees referred to in section 3 and any other statutory rights you may have under the Australian / New Zealand Consumer Law and/or other applicable laws.

2. Warranty exclusions

This express warranty does not apply where:

a) The product has been installed, used or operated otherwise than in accordance with the product manual or other similar documentation provided to you with the product;

b) The product requires repairs due to damage resulting from accident, misuse, incorrect installation, insect or vermin infestation, improper liquid spillage, cleaning or maintenance, unauthorised modification, use on an incorrect voltage, power surges and dips, voltage supply problems, tampering or unauthorised repairs by any persons, use of defective or incompatible accessories or exposure to abnormally corrosive conditions, events independent of human control which occurred after the goods left the control of Glen Dimplex;

c) The repair relates to the replacement of consumable parts such as fuses and bulbs or any other parts of the product which require routine replacement;

d) You are unable to provide us with reasonable proof of purchase for the product;

e) the breakdown occurs after the expiry of the express warranty period set out in section 1 or

f) the product was not purchased in Australia / New Zealand as a brand-new product.

3. Consumer guarantees

Our goods come with guarantees that cannot be excluded under the Australian / New Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

4. How to make a claim

You may make a claim under this warranty through our website, contacting our customer care line or via email. Contact details for Glen Dimplex Australia and New Zealand can be found at the end of this document

To make a valid claim under this warranty, you must:

a) Lodge the claim with us as soon as possible and no later than 14 days after you first become aware of the breakdown;

b) Provide us with the product serial number;

c) Provide us with reasonable proof of purchase for the product. This can take the form of a store receipt, new home handover form or other payment receipt documentation; and

d) If required by us, provide us (or any person nominated by us) with access to the premises at which the product is located at times nominated by us (so that we can inspect the product).

5. Warranty claims

If you make a valid claim under this warranty and none of the exclusions set out in section 2 apply, we will, at our election, either repair the product or replace the product with a product of identical specification (or where the product is superseded or no longer in stock, with a product of as close a specification as possible).

Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.
Products are designed and supplied for normal domestic use. We will not be liable to you under this warranty for business loss or damage of any kind whatsoever.

Glen Dimplex Australia Pty Ltd
www.glendimplex.com.au

Australia
Ph: 1300 556 816
customer.care.ha@glendimplex.com.au

Glen Dimplex New Zealand Ltd
www.glendimplex.co.nz
New Zealand
Ph: 09 274 8265
nztechserv@glendimplex.co.nz

READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE.

The manufacturer will not be responsible for any damage to properly or to persons caused by incorrect installation or improper use of the appliance.
The manufacturer is not responsible for any inaccuracies, due to printing or transcription errors, contained in this manual. In addition, the appearance of the figures reported is also purely indicative.

The manufacturer reserves the right to make changes to its products when considered necessary and useful, without affecting the essential safety and operating characteristics.
Glen Dimplex constantly seeks ways to improve the specifications and designs of their products. Whilst every effort is made to produce up to date literature, this document should not be regarded as an infallible guide. Actual product only should be used to derive cut out sizes.

All appliances must be installed by a qualified person/s with adherence to the relevant electrical, plumbing and building codes, with compliance being issued as required by state or national legislation.

Additionally, all upright cookers must have the anti-tilt device installed correctly in adherence to the relevant standards by a licenced installer.

For maximum effectiveness and efficiency all rangehoods should be installed with the use of ductwork, by a licenced installer with adherence to the relevant state and national building codes and regulations.

All Glen Dimplex appliances are for Domestic use only, and must be installed by a licence installer into Domestic Applications only, without exception and to the required Authorities guidelines. Any installation outside of this will VOID warranty. Alfresco areas are not a Domestic application.

Euromaid logo

Distributed by:

Glen Dimplex Australia Pty Ltd
www.glendimplex.com.au
Glen Dimplex New Zealand Ltd
www.glendimplex.co.nz

For service advice, please contact the Customer Care Centre by phone or email below.

Australia
Ph: 1300 556 816
customer.care.ha@glendimplex.com.au

New Zealand
Ph: 09 274 8265
nztechserv@glendimplex.co.nz

VERSION 1 REVISION 20200227

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals