BOSS All-Terrain Sound System User Manual

BOSS All-Terrain Sound System User Manual

SUPPORT
For the latest information about this product please visit www.bossaudio.com

TECH SUPPORT : 805-488-4853
Tech Support: www.bossaudio.com/support/technical- support/

All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of BOSS AUDIO SYSTEMS.
All other trademarks and trade names are those of their respective owners.
Copyright © 2020* Boss AUDIO SYSTEMS.

Thank you for purchasing this

ATVBBRGB All-Terrain Sound System
Please read through these Instructions carefully so you will know how to operate your model properly.

After you have finished reading the Instructions, keep this document In a safe place for future reference.

THIS PACKAGE CONTAINS

1-ATVBBRGB All-Terrain Speaker System
2- Mounting Straps + 2 Nylon Zip Straps
1- Power Accessory Extension Adaptor
1- RGB REMOTE
1- User Manual
1- Warranty Card

INFORMATION TO THE USER

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. Other trademarks and trade names are those of their respective owners.

FCC COMPLIANCE STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of this device.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The Bluetooth antenna cannot be removed (or replaced) by user. this equipment complies with FCC/ IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Relocate or reorient the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION!!
ADJUSTMENT OR ALTERATIONS OF THIS DEVICE MAY RESULT IN HAZARDOUS RADIATION EXPOSURE

BEFORE YOU START

IMPORTANT SAFETY PRECAUTIONS

• Do not operate mobile equipment while driving a motorized vehicle – safe driving and safety consideration of others should always be your highest priority.
• In the event you should notice smoke, strange noises or odor from this product, or any other abnormal signs, immediately turn off the power and consult your dealer or the nearest authorized BOSS AUDIO SYSTEMS Service Center. Using this product in this condition may result in permanent damage to the system.
• Set your volume control at a low setting, then slowly increase the sound until you can hear it comfortably without distortion, or ear discomfort.
• BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
  • Do not turn up the volume so high that you can’t hear what’s around you.
  • Use caution or temporarily discontinue use in potentially hazardous situations.

INSTALLATION PRECAUTIONS

WARNING – Always consult a professional installer

• Professional installation recommended. Do not attempt to service this product by yourself.
• Servicing of this product by persons without professional training and experience in electronic equipment and motorized vehicle accessories may be dangerous and could expose you to the risk of electric shock, Injury or other hazards.
• Contact BOSS Audio Systems for any installation, service questions or requests.
• The ATVBBRGB can be powered from a vehicles cigarette lighter/ auxiliary power port, or hard wired directly to the battery through an optional relay/ accessory switch
• When wiring directly to the vehicles battery, be sure to disconnect the batteries negative terminal wire before starting any wiring procedures, it is suggested that an optional fuse and fuse holder (not included) with minimum rating of 15 Amps be in line with the positive battery terminal
• The ground cable length should not exceed 18-inches (See wiring diagram)
• The ATVBBRGB has a weather resistant design, it should not be submerged in or under water under any circumstances
• Use only the installation parts provided with the ATVBBRGB
• Wash with a mild soap or detergent and lukewarm water using a clean sponge or a soft cloth. Rinse well with clean water.

“Don’ts” – Very Important

• DON’T clean in hot sun or on very hot days.
• DON’T use abrasive or highly alkaline cleaners on the main body
• DON’T scrape the main body with razor blades, or other sharp instruments
• DON’T ever use, gasoline, acetone or carbon tetrachloride

CAUTION!!
Using other mounting methods may void this warranty

GETTING TO KNOW YOUR ATVBBRGB

A. BOSS AUDIO ATVSBRGB
1. 3.5mm AUX-INPUT
2. CIGARETTE POWER CABLE ADAPTOR
3. LED POWER INDICATOR
4. RGB LED LIGHTS
5. RGBREMOTE

BEFORE YOU START

PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION

1. Power on the ATVBBRGB by plugging in the male cigarette lighter adaptor into ® a female cigarette lighter receptacle.

2. The ATVBBRGB will automatically go in to pairing mode:

   • ANDROID users:
     

   • a. Go into the Settings Menu of your device

   • b. Enter the Bluetooth Menu

   • c. TURN ON Bluetooth and press SCAN

   • d. “Boss Audio ATVBBRGB “will now be displayed under AVAILABLE DEVICES

   • e. If prompted, enter passcode: “0000”

   • iOS users:
     

   • a. Go into the Settings Menu of your iOS device

   • b. Enter the Bluetooth Menu

   • c. TURN ON Bluetooth

   • d. “Boss Audio ATVBBRGB “will now be displayed

   • e. If prompted, enter passcode: “0000”
     NOTE : You have 2 Minutes Before You Must Restart This Procedure Over Again.

3. If Boss Audio ATVBBRGB is not seen, repeat the above steps to refresh the” Device List”

4. When the connection is successful, you are now ready to stream music from your favorite media player to the ATVBBRGB

BLUETOOTH OPERATION

RECONNECTION

1. Power on the ATVBBRGB and your last paired Bluetooth device.
2. The unit will now automatically reconnect
3. If your device was previously paired with the ATVBBRGB, but it wasn’t the last paired device:
   • a. Ensure no other devices are currently paired
   • b. Enter the Bluetooth Menu on your device being paired
   • c. “Boss Audio ATVBBRGB “will display under AVAILABLE DEVICES
   • d. Choose the “Boss Audio ATVBBRGB” to reconnect
4. If the device is out of range from the ATVBBRGB, it will disconnect automatically:
   • a. The ATVBBRGB will automatically reconnect to the device once back in range

Tips : To avoid battery exhaustion, be sure to occasionally run the vehicles engine while using this product. Using this product without running the engine can drain the battery.

STREAMING MUSIC

BLUETOOTH OPERATION

1. Press the PLAY/PAUSE from your devices touch screen

VOLUME CONTROL
2) To raise or lower the volume use your device volume controls

Tips : For Maximum Audio Performance, ensure your device Bluetooth volume is set to a minimum 75% level before stowing.

AUX INPUT

ATVBBRGB can play audio from any device that has a 3.5mm headphone audio jack.

AUX-IN OPERATION

1. Power on the ATVBBRGB by plugging in the male cigarette lighter adaptor into ® a female power accessory receptacle.
2. Disconnect any paired Bluetooth device by turning off Bluetooth in your devices Settings Menu
3. Connect the integrated 3.5mm AUX-IN cable G) to your devices headphone jack
4. Route the wire back to ATVBBRGB, and secure your device

VOLUME CONTROL

5. To raise or lower the volume use your device volume controls

Tips : For Maximum Audio Performance, ensure your device Bluetooth volume is set to a minimum 75% level before stowing.

INSTALLATION

1. Use the supplied adjustable straps to ensure to rails or roll bars
2. Always recheck straps before every ride

GETTING TO KNOW YOUR ATV8BRGB RGB REMOTE

1. RGBREMOTE
2. POWER ON / OFF
3. MODE UP
4. AUTO DEMO
5. SPEEDUP
6. BRIGHTNESS UP
7. BRIGHTNESS DOWN
8. MODE DOWN
9. COLOR DOWN
10. COLOR UP
11. SPEED DOWN

1. RF controller range: Up to 25ft (LoS)
2. Do not obstruct the RF remote with metal
3. Always keep away from small children
4. Do not store in direct sunlight

TROUBLESHOOTING

SUPPORT
For the latest information about this product please visit www.bossaudio.com

TECH SUPPORT : 805-488-4853
Tech Support: www.bossaudio.com/support/technical- support/

DIMENSIONS

WIRE DIAGRAM

SPECIFICATIONS

BLUETOOTH
• Version: 5.0 w/ EDR
• A2DP
• Range:33ft(1 Om)

AMPLIFIER
• ClassD
• Maximum Output Power: 700 Watts
• Input impedance: 10kO
• Frequency Response: 45Hz-22kHz

SPEAKERS
• Dimensions: 8″ 1203.2mm
• Cone Type: PP CARBON+ RUBBER SURROUND
• Tweeter Size: 1.5″ PEI SOFT DOME

GENERAL
• Operational Power: 12VDC (10-16Vallowable)
• MAX Current Draw: 10A
• Replacement Fuse: 1 OAAGC TYPE
• Color: Black
• Weight: 13.6Ibs 16.2Kg
• Dimensions mm WxHxD: 747X222X310
• Dimensions Inches WxHxD: 29.4×8.7×12.2

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>