ANKER PowerPort Atom III User Manual
- June 7, 2024
- Anker
Table of Contents
ANKER PowerPort Atom III User Manual
PowerPort Atom III
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
Attention
- The product is designed for use with IT equipment only.
- The maximum ambient temperature during use of the appliance must not exceed 25°C.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho
Cucamonga, CA, 91730, US
Telephone: +1 909-484-1530
This device complies with Industry Canada license-ICES-003.
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2322 is in
compliance with Directive 2014/35/EU &
2014/30/EU & 2011/65/EU & 2009/125/EC. The full text of the EU declaration of
conformity is available at the following
internet address: https://www.anker.com Anker Innovations Limited | Room
1318-19, Hollywood Plaza,
Specifications
| Input | 100-240V ~ 1.8A 50-60Hz |
|---|---|
| USB C Output | 5 V 2.4 A / 9 V 3 A / |
15 V 3 A / 20 V 2.25 A
USB A Output| 5 V 2.4 A / 9 V 1.66 A /
12 V 1.25 A
Customer Service
18-month limited warranty *
Please note that your rights under applicable law governing the sale of
consumer goods remain unaffected by the warranties given in this Limited
Warranty.
Lifetime technical support
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>