SPORTS AFIELD SA5516J Journey Series Gun Safe Instruction Manual

: June 14, 2024
: SPORTS AFIELD

**SPORTS AFIELD SA5516J Journey Series Gun Safe Instruction Manual

**

IMPORTANT: read this information and follow all safety rules carefu

WARNING

Tip Over Hazard
A child or adult can tip the safe and be killed or seriously injured.
Failure to secure the safe as shown in these instructions can result in death or serious injury to children and adults. Children should not play with or around the safe at any time.

DISCLAIMER – READ BEFORE SAFE SETUP

PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR SPORTS AFIELD SAFE.

DO NOT LOCK THIS MANUAL OR THE OVERRIDE ACCESS KEYS IN YOUR SAFE.

Thank you for choosing a Sports Afield Safe to protect your valuables. We are committed to securing, organizing and protecting your most important documents, valuables and keepsakes.
Your safe is built to last a lifetime. However, please understand that the locking mechanism has precision parts. If you experience ANY difficulty opening or closing your safe, DO NOT FORCE THE SAFE OPEN. Doing so may jam the components in the lock, which will require a safe technician to unlock your safe. This causes an inconvenience for you, and may lead to a claim denial.
If you experience problems or challenges with your safe, please contact us. Many issues can be quickly resolved without the product being returned.

Safes & More Customer Service – 888-717-4819

SAFETY

Safe bodies and doors are extremely heavy thus SA Products Requires a minimum of two people to insure stability of the safe durring installation. Always ensure proper installation, as laid out in this manual, and do not open the door with the safe on an uneven or unstable floor. Ignoring this could result in serious injury or death.
Keep a record of your combination number in a secure place, away from children, and separate from your safe. You will need this information along with your proof of purchase to obtain technical assistance and replacement keys.

WEAPON STORAGE

If you choose to utilize this safe to store a weapon always follow proper weapon and local laws when storing a weapon.
SA Consumer Products strongly recommends that you do not store loaded guns.
Always follow the firearm safety rules set out by the firearm’s manufacturer .
A Cascade Pro Safe or any other firearm storage device cannot take the place of other safety procedures including advising children of the dangers of firearms.
SA Consumer Products and its distributors of the Sports Afield Safes do not recommend, suggest, advise, promote, or otherwise condone the ownership or use of firearms. We believe the decision to own or use a firearm is a serious decision that should only be made by an adult who has carefully considered the risks and benefits of such a decision.

UNDERSTANDING YOUR SAFE

EXTERIOR (Closed)
Understanding your safe

INTERIOR (Open)
Understanding your safe

INSPECTION

Make sure to inspect your safe for shipping damage before accepting delivery. If you find any damage, please contact the delivery company (or carrier) immediately.
Any damage not noted upon delivery must be reported within fifteen (15) days or there will be no recourse. Any noted damage at the time of delivery must be resolved with the delivery company and/or retailer. Shipping damage is not warrantable by SA Products.

UNBOXING

WARNING: SAFES ARE HEAVY AND CAN BE UNSTABLE ON UNEVEN GROUND. PLEASE ENSURE EXTRA CAUTION WHEN DEALING WITH OR MOVING UNSECURED SAFES. WHILE UN BOXING BE SURE TO HAVE A SECOND PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING INJURY, AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.

Remove the packaging. Carefully remove the box, ensuring not to damage the safe and/or injury yourself. You will want to have someone stabilize the safe when removing the cardboard and other packing material from underneath the safe.

OPENING YOUR SAFE

Locate the override keys and single handle spoke inside the plastic bag hanging on the front of the safe. Step 1
Gently remove the E-Lock from the safe by first pushing in the release tab on the bottom of lock face backer plate. Then turning the lock face counter clockwise until the keypad detaches from the mounting plate on the door of the safe. Allow the keypad to gently hang from the wires.
Locate the circular keyhole 7′.7 in the backer plate. Insert and turn the key Clockwise from 9 to 12 o’clock to unlock.
Turn the handle clockwise until the safe door opens. Once open, turn the handle back to it’s starting position so the bolts are open and extended. Remove key.

E-LOCK BATTERY INSTALLATION

The E-Lock requires 4 x AA alkaline batteries. Locate the battery compartment on the inside of the door I panel. Insert the batteries in the proper orientation and order. Keypad will beep when batteries are successfully installed. Replace battery cover.

WARNING: The batteries musty be inserted with the correct polarity. Exhausted batteries must be removed from the product and discarded safely. Do not mix old and new batteries. Do not mix alkaline or standard (carbon— zinc) batteries Do not use rechargeable (nickel — cadmium) batteries.
Replace the E-Lock onto the safe door by aligning the lock face to the backer plate, and turning clockwise until you feel the e-lock click into place.

LOW BATTERY WARNING

This E-Lock is equipped to alert you when the batteries are low by illuminating the red light (center)on the keypad when the [ # ] sign is pressed
Always test the batteries when installing or replacing. If the red light comes on when a button is pressed you know the batteries are not fully charged.

E-LOCK SECURITY CODE SETUP

Important: It is necessary to re-program your safe with a new security code you have personally selected to provide maximum household secuirty. Be careful, in choosing your new security code, you’ll want to be sure that you can operate the unit quickly without making an error.

Key in the preset factory code [159#]. The left light will turn green. Turn the handle to ensure bolts are activated. Once confirmed return handle to starting position to lock bolts out.
On the inside of the safe door, locate the small brass cap. Unscrew and remove the cap, you will now see the reset button. Press and release the reset button You will hear a beep. The yellow (right) light on the E lock will illuminate so that you can enter your new code.
Enter your new 3 to 8 digit security code while the yellow (right LED) light is illuminated followed by the [ ] symbol. Keypad will beep twice after pressing the []symbol. Wake up the keypad by pressing any button. Reenter new code, now followed by the [ #] symbol. The Keypad will flash yellow (right LED), beep twice, then flash green (left LED).
While the safe door is still open, Confirm your newly entered security code. Wake up the keypad by pressing any button. Then ent the 3-8 digit code followed by the [ # ]. lfsuccesful you will hear two beeps and the green light will illuminate,allowing you to retract the bolts.

Note: Do not shut the safe door until you have confirmed your new security code at least 3 times to ensure your code has been saved and you can open the door succesfully If the code fails, the yellow (left) light will flash and beep. Repeat the steps above until succesful.

Warning: If the incorrect security code is entered 3 times you will have an automatic lockout for 20 seconds before you can enter your code again. If 3 additional failed attemps are made, the keypad will lockout for 10 minutes. Leave batteries in to go through lockout cycle. If batteries are removed the timer will restart zero

LOCKED OUT OF YOUR SAFE

In the event you have forgotten the security code your primary action will be to use your backup keys in order to gain access to your safe and follow the E-Lock Security Setup Code instructions, starting at step 2 of activating the brass reset button.
If you have lost your backup keys, you will need to contact customer service at the number below. Proof of purchase is required to obtain keys.

Safes & More Customer Service – 888-717-4819

ANTI THEFT ALERT ALARM SYSTEM

By activating the theft alert alarm system, if the safe is tampered with, the alarm will sound for 20 seconds.
To stop the alarm from sounding, enter your security code or use the override key to open the safe and remove the batteries.

To activate, Press [ * 0 0] to active the theft alert alarm system.
Every time a correct security code is entered the alarm is de-activated. To re active press [ * 0 0 ].

E-LOCK QUIET MODE

By activating the E-lock quiet mode, the safe will no longer make audible sound when interacting with safe, allow for silent access.

To mute the E-Lock, enter the code [ * 6 3 3] .
To turn the sound back on, enter code [ * 6 6 ].

PROPER PLACEMENT AND MOVING OF SAFE

WARNING: SAFES ARE VERY HEAVY AND AWKWARD TO HANDLE. PLEASE USE THE UTMOST CARE IN MOVING THE SAFE. UTILIZING A TRAINED PROFESSIONAL WITH PROPER MOVING EQUIPMENT IS HIGHLY RECOMMENDED.

The location of the gun safe is very important and the utmost care should be taken during this consideration.

To maximize the fire protection of your safe, we recommend you place the safe in lower levels in your home where fire temperatures are lower and away from highly combustible materials.
To maximize burglary protection and stability, securing the safe to the floor is recommended.
SA Consumer Products recommends that you store your Safe in a closet, office, basement, bedroom or any other location that is convenient for you but out of direct line of sight from prying eyes. The location of the Gun Safe is very important.

Using a dolly capable of supporting the size and weight of your safe, move the safe to your desired location. Please take all necessary precautions to protect and prevent any damage to your flooring.

HELPFUL: TO DETERMINE WHETHER YOUR SAFE WILL MAKE IT THROUGH DOORWAYS, STAIRS OR CORNERS TAKE THE EMPTY SAFE BOX AND SEE IF IT WILL FIT ALL THE WAY THROUGH TO ITS FINAL LOCATION.

The safe should be installed adjacent to a side wall with minimal space on either side of the safe. Wherever possible, the safe should be flat against the wall and floor. Remove the baseboard and/or wall trim if necessary.
Always ensure the safe is in an isolated and dry area. Never place the safe in direct contact with a wet floor. When installing your safe on a concrete floor, use of a moisture/protective barrier is highly recommended. Failure to do so, or exposing the safe to chemicals or other adverse environments, may void the warranty.
If your safe seems unlevel, you may need to shim the bottom of the safe to prevent the door from swinging open too quickly, or closing on itself.

SECURING YOUR SAFE

WARNING: YOUR SAFE IS DESIGNED TO SUPPORT ITSELF WHEN THE DOOR IS OPENED. HOWEVER, CAUTION SHOULD BE USED TO AVOID TIPPING. WHILE SECURING YOUR SAFE BE SURE TO HAVE A SECOND PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING INJURY, AND/OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES. FAILURE TO DO SO WILL COMPROMISE THE SAFETY, SECURITY AND WARRANTY OF THE SAFE.

TOOLS NEEDED TO BOLT SAFE TO A CONCRETE SURFACE

DRILL/ HAMMER DRILL
DRILL BIT -1/2″ ( for installing into concrete with provided hardware)
WRENCH/ 11/16″ (17MM) SOCKET
HAMMER

Use the hardware provided or consult your hardware retailer for fastening hardware for your particular mounting surface.
Open your safe door and locate and remove the four black caps on the safe floor. This will provide access to the factory drilled bolt down holes.
To secure your safe to the floor it will first be necessary to drill pilot holes in the floor surface.
Drill the appropriate diameter and depth of pilot holes based on the type of hardware being used and the type of floor surface. For the hardware provided (concrete floor installation) we recommend using a hammer drill and 1/2″ concrete drill bit to drill holes the four corresponding holes in the concrete floor.
Insert and drive the plastic anchoring plugs into the pilot holes. You may need to use a hammer to fully insert the plugs into the pilot holes.
Secure the safe, by threading all 4 anchor bolts through the factory drilled bolt down holes in the bottom of the safe and ratcheting down tight.
- Make sure the metal washer sits on top of the rubber washer. Tighten the bolt to compress the rubber washer between the safe and metal washer. Failure to do so, will allow water to enter the safe in the event of a flood.
Replace the four black caps onto the floor of the safe.

LOADING YOUR SAFE

Store documents or heat sensitive items in the bottom of the safe for greatest protection against fire damage.
Store ammunition separately from valuables.
Do not put anything in your safe that will put pressure against the door when it is closed.
Select safe models have reinforced shelving but as a good safety precaution store heavier items either on the floor of the safe or away from the middle of the shelves.
When loading guns into your safe, make sure they rest securely against the cutouts provided in the gun racks to prevent accidental tipping when the door is closed.

KEEPING YOUR SAFE DR

We recommend placing a moisture/protective barrier between your safe and concrete floor to prevent any moisture, mildew and rust damage the safe. Installing your safe in a place with climate control (heat in the winter and cooling in the summer) is highly recommended. In areas of high humidity or frequent temperature fluctuations (garages) it is recommend to take appropriate precautions to ward against moisture damage. We strongly encourage the use an internal dehumidifier and/or desiccants to protect your contents from rust or mildew. Internal dehumidifiers should not be in direct contact with the side or back walls.

MAINTAINING HINGES AND INTERNAL MECHANISMS

The hinges and internal locking mechanism are permanently lubricated, thus needing no maintenance. Opening the door panel of your safe may void your warranty. Always consult our customer service experts prior to doing so.

Distributed by:

SAFESandMORE.com
Text or Call: 888-717-4819
support@safesandmore.com

LIFETIME WARRANTY

SA Consumer Products, Inc. will repair or replace, at their sole discretion, any Sports Afield Gun Safe damaged by fire, forced entry, forced attack or natural flood for the lifetime of the original owner.,

SA Consumer Products, Inc. will repair or replace, at their sole discretion, any Sports Afield Gun Safe with defective parts, paint or lock for the lifetime of the original owner.

If SA Consumer Products, Inc. deems a replacement safe is to be sent, they will pay the freight costs to ship the replacement safe to the original owner.

This lifetime warranty is limited to the safe and expressly excludes any loss associated with the contents of the safe.

SA Consumer Products, Inc. reserves the right to receive full evidence of your misfortune, such as a police report and/or homeowner’s statement of coverage. This warranty is not valid
outside of the United States and Canada.

Proof of registration and copy of sales receipt must be on file at the time of claim. Visit our website at www.sportsafieldsafes.com to register your safe.

Lifetime warranty only applies to the original owner of the safe.

SA Consumer Products, Inc. shall only be responsible and liable when the safe is used in compliance with the directions specified in your new Sports Afield Safe Owner’s Manual.

SA Consumer Products, Inc. requires that specific guidelines be followed for repair. The safe will be repaired in-home if possible (to include parts and labor): however, if factory replacement is necessary (at SA Consumer Products, Inc.’s sole discretion), the replacement will be shipped freight prepaid, curbside delivery.

This warranty is inclusive and is in lieu of any and all other warranties, express or implied. Specifically excluded are the warranties of merchantability and fitness for a particular purpose. This warranty is limited to the safe itself and/or its value and does not include consequential damages of any kind including, but not limited to, the contents in and of the safe.

SPORTS AFIELD Logo