Joint Chinese 2025 Smart HR Sp02 ECG Health Watch User Manual

Joint Chinese 2025 Smart HR Sp02 ECG Health Watch

Introduction

2025 is a smart health watch which can monitor multiple body vital signs under many different activity modes.

Note: the watch is not a medical device. The test results and suggestions are for reference only.

What’s Included in the Box

1. Watch with detachable band
2. Magnetic USB charger
3. User manual
4. Gift box

Download the APP

• Scan the QR code below or search JClife on Google Play or iOS App Store to download our JClife App.
• Make sure the Bluetooth of your mobile device is on.
• Choose device identified in App and connect to your smart watch device. Note: Please ensure that your Android version is 4.3 or later, iOS version is 9.0 or later. The watch supports Bluetooth 5.1 connection.

Charge the Battery

Your device is powered by a rechargeable battery.

If the battery is less than 5%, the low battery icon will appear to remind you to charge the device. Please use the magnetic USB charger to recharge the device. The display will light on for 10 seconds during charging, then turns off automatically. It takes about 1.5 hours to be fully charged.

Note:

1. Please prevent the USB charger port from coming into contact with conductive materials, such as liquids, dust, metal powders and pencil leads.
2. The other functions except time doesn’t working during charge. If you want to play the watch, please stop charging first.

Activate the Device

When out of the factory, the watch is set into hibernation mode to save the battery. Before use, please charge to activate your watch. After activation, the watch will start charging. Please use your watch only after it is fully charged.

Basic Operation

Swipe up: Quick setting, can set time format, silent mode, brightness level, lift wrist, music control, find phone, checking battery level, etc.
Swipe down: Different social notifications.
Swipe left: Check detailed daily activity and sleep reports, to start different Multi-sports mode.
Swipe right: Check detailed operation for different functions, e.g. real- time Heart Rate Monitor, Sp02 Monitor, ECG Monitor, HRV/Stress/Blood Pressure Monitor, and more function settings.
Home button: Return to the main screen with one click, or return to the previous screen.

Function Operation

Heart Rate Monitor

Swipe right from home screen to find the Heart Rate icon. The device will automatically start heart rate monitoring. Please wear tightly for accurate heart rate monitoring, otherwise the device will gently vibrate to remind you to wear tightly.

Sp02 Monitor

Swipe right from home screen to find the Sp02 icon. Tap to start Sp02 monitoring. Please wear tightly for accurate Sp02 monitoring, otherwise the device will gently vibrate to remind you to wear tightly. Please keep still while measuring.

ECG Monitor

Swipe right from home screen to find the ECG icon. Tap to start ECG monitoring. Please wear tightly for accurate ECG monitoring, otherwise the device will gently vibrate to remind you to wear tightly. Please keep still and make sure your fingers touch the metal frame of the device during ECG measurement. After measurement, you can check the ECG report on the mobile APP.
You can also start ECG measurement on APP for real time ECG monitoring.

Blood Pressure, HRV & Stress Monitor

Swipe right from home screen to find the Vitals icon. Tap it to measure blood pressure, HRV and stress level. Please keep still while measuring. After the measurement, you can slide to check the report. How to measure blood oxygen level (Sp02), HR, ECG and other vital signs correctly?

1. For better accuracy, do keep your arm still, fasten the strap tightly, and make sure the screen is facing up. Please make sure the watch is worn on the correct position of the wrist, which is at least one-index-finger-width away from the carpal bone.
2. If you are not wearing your band, or wearing it incorrectly, an error message will be displayed. Please read the onscreen instructions for how to wear it correctly and touch Retry to restart the measurement.
3. During the measurement, keep the screen facing up and your body still. The Sp02 measurement will be paused if you move your arm and the screen will show “Don’t Move”. Please always keep still to get accurate measurement. Each measu­rement lasts for about 1 minute, and the displayed Sp02 is updated every second.
4. The Sp02 measurement will be interrupted while receivinga notification for an incoming call or alarm.
5. Make sure the sensor area on the back of the watch is clean, dry and free from foreign objects.
6. In case in low temperature environment (such as high altitude, winter and other low temperature scenes), please take off the watch, try to rub the wrist to stimulate blood circulation, and then wear the watch again for measurement.
7. Thick hair, tattoos might affect the measurement of Sp02Nital Signs, please try to avoid wearing the watch on those areas.
8. In order to make the measurement more accurate, it is recommended that you wear it for 3-5min before measuring Sp02Nital Signs.
9. The watch supports oxygen saturation measurements in the range of 70% to 100%.

Body Temperature Monitor

There are two measurement methods for body temperature:

1. Wear on wrist to get 24H real-time temperature monitoring: wear the smart watch normally and keep the back pressed against your wrist. It can automatically measure your 24H real-time wrist temperature trend.
2. Wear under armpit to get highly accurate temperature measurement: Swipe right from the home screen to find the More icon, tap it and slide down to find the Temp icon. Then press the Temp icon to start armpit temperature monitoring. After removing the strap, press the smart watch (sensor side) under your armpit, then clamp it for 4-5 minutes for accurate meas­urement.

Breath Training

Swipe left from home screen to find the Exercise icon, slide down to find Relaxation icon. Tap to start breath training.

Multi-Sport Mode

Swipe lett from home screen to find the Exercise icon, you can choose Walk, Run, Workout, Cycle, Relaxation, Cricket, Yoga, Climb, Aerobics, Basketball, Badminton, Soccer, Dance, Table Tennis, Rope Jump, Sit-ups, Volleyball or Tennis to take exercises, it can record your exercise data, such as exercise time, steps, distance, speed, heart rate, calories, etc. Detailed exercise report can be checked on the APP.

More Functions

Swipe right from home screen to find the More icon, you can do different Settings, play more functions like Music Control, Stopwatch, Timer, Alarm, Camera, Find Phone, SOS and Temperature.

Note: For SOS Help function, first you need to set Emergency Contact (Name & Phone Number) in Personal Info page on APP, up to 3 contacts can be set. The SOS Help function can be triggered effectively only when the Bluetooth of the watch and the APP are connected, a SOS message will be sent to the emergency contact person, including your name & GPS locat­ion.

Settings

There are two ways to find the Settings icon:

Swipe up to find the Settings icon; or swipe right from home screen to find the More icon, tap to find function menu where you can find the Settings icon.
Click the Settings icon, you can set Wallpaper, Screen Time, Power Off and Reset, as well as view more about Battery status, Language switch and About (Device Info). Note: You can switch different wallpapers or on the watch and APP both, or customize your home screen wallpaper via the APP.

Specifications

• Warranty: 12 Months
• Main Body Size: 44_5•37_5•10.5mm
• Weight: approx. 46g
• Display: 1.57 inch HD TFT
• Battery: 240mAh Lithium Polymer Battery
• Data Memory: 30 Days
• Waterproof: 5ATM
• Activity Time: 99h59min
• Calories Burned: Max 9999.9kcal
• Running & Waling Distance: Max 999.99km

Precautions for Use

1. Warning! Children swallowing risk! Children are not allowed to play with the device. Keep children away from the device.
2. Warning! Risk of fire/ explosion or chemical burns! This product contains a lithium-ion battery. Do not remove, disas­semble, throw into fire or short the battery.
3. Caution! Possible property damage! Do not drop the device and protect it from impact.
4. Do not expose the device to extreme temperatures or extreme temperature fluctuations. Protect the device from direct sunlight and dust.
5. When cleaning, do not use any strong chemical, abrasive or foam cleaning materials. Protect the display from hard obj­ects.
6. Do not dispose off the device in domestic waste! If you have any questions, please contact your municipal waste disposal authority. Do not dispose off used batteries in domestic waste. Instead, take them to a special waste disposal site or a retailer’s battery collection point. Packaging is recyclable or can be recycled into raw materials.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential install­ation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordanceThe device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC Statement

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Develo­pment Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interf­erence that may cause undesired operation of the device.

The term “IC:” before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>