VOLLRATH T38707464 One Piece Cafeteria Breath Guard Installation Guide
- June 8, 2024
- VOLLRATH
Table of Contents
VOLLRATH T38707464 One Piece Cafeteria Breath Guard
Installation Instructions
One Piece Cafeteria Breath Guard Three Piece Cafeteria Breath Guard
These instructions cover the installation of the one-piece Cafeteria Breath Guard and the three-piece Cafeteria Breath Guard.
One Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the
breath guard follow these steps:
NOTE
Use caution when tightening the cap nuts. Overtightening may cause the plastic
to crack.
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the one-piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
- Install the side breath protector (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.
Three-Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the
breath guard follow these steps:
NOTE
Use caution when tightening the cap nuts. Overtightening may cause the plastic
to crack.
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
- Install the side shield (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.
- Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
- Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.
The Vollrath Company, L.L.C.
- 1236 North 18th Street
- Sheboygan, WI 53081-3201
- U.S.A.
- Main Tel: 800.628.0830
- Service Tel: 800.628.0832
- FAX: 800.752.5620
- Vollrath of Canada, Co.
- Tel: 800.695.8560
- FAX: 800.752.5620
- 2010 The Vollrath Company, L.L.C.
- www.vollrathco.com
Specifications
- Manufacturer: Vollrath Company, L.L.C.
- Model: Cafeteria Breath Guard
- Types: One Piece and Three Piece
- Item No.: 2350030-01 Rev 04/12
FAQ
Q: What should I do if I accidentally overtighten the cap nuts?
A: If you accidentally overtighten the cap nuts and notice cracking in the
plastic, stop tightening immediately to prevent further damage. Contact
Vollrath Company for assistance.
Q: Can I install the breath guard on my own without professional help?
A: Yes, the installation instructions provided are detailed and can be
followed by individuals with basic DIY skills. However, if you encounter any
difficulties or have concerns, it is recommended to seek assistance from a
professional installer.