TRiSTAR IK-6178 Induction Cooker Instruction Manual
- June 14, 2024
- Tristar
Table of Contents
TRiSTAR IK-6178 Induction Cooker
SAFETY
- By ignoring the safety instructions the manufacturer cannot be held responsible for the damage.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
- Never move the appliance by pulling the cord and make sure the cord cannot become entangled.
- he appliance must be placed on a stable, level surface.
- The user must not leave the appliance unattended while it is connected to the supply.
- This appliance is only to be used for household purposes and only for the purpose it is made for.
- This appliance shall not be used by children aged less than 8 years. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.
- To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid.
- Keep the appliance and its cord out of reach of children less than 8 years.
- The temperature of accessible surfaces may be high when the appliance is operating.
- The appliance is not intended to be operated using an external timer or a separate remote-control system.
- The surface is liable to get hot during use.
- WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of an electric shock.
Symbols and explanation
- This product complies with conformity requirements of the applicable European regulations or directives.
- The Green Dot is the registered trademark of Der Grüne Punkt Duales System Deutschland GmbH and is protected as a trademark worldwide. The logo may only be used by customers of DSD GmbH holding a valid trademark usage contract or by engaged waste management companies within the Federal Republic of Germany. This also applies to the reproduction of the logo by third parties in a dictionary, an encyclopaedia or an electronic database containing a reference manual.
- The universal recycling symbol, logo, or icon is an internationally recognized symbol used to designate recyclable materials. The recycling symbol is in the public domain and is not a trademark.
- Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local Authority or local store for recycling advice.
- The product and packaging materials are recyclable and subject to extended manufacturer responsibility. Dispose of it separately, following the illustrated packaging symbols, for better waste treatment. The triman logo is valid in France only.
- This symbol is used for marking materials intended to come into contact with food in the European Union as defined in regulation (EC) No 1935/2004.
- In a double-insulated appliance, two insulation systems are provided instead of an earth wire. No earthing means is provided on a double-insulated appliance, nor should a means for earthing be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should only be done by qualified service personnel. The replacement parts for a double-insulated appliance must be identical to the parts they replace.
- A double-insulated appliance is labelled with the words ‘CLASS II’ or ‘DOUBLE INSULATED”. It can also be identified with the double insulation symbol.
- The Eurasian Conformity mark (ЕАС) is a certification mark to indicate products that conform to all technical regulations of the Eurasian Customs Union.
PARTS DESCRIPTION
- Hot plate
- Timer indication light
- Wattage indication light
- Temperature indication light
- Timer button
- Temperature button
- Power button
- Down button
- Up button
- On/off button
BEFORE THE FIRST USE
- Take the appliance and accessories out of the box. Remove the stickers, protective foil or plastic from the device.
- Before using your appliance for the first time, wipe off all removable parts with a damp cloth. Never use abrasive products.
- Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V 50/60Hz). Description of heating principle of the induction cooker
- The induction cooking plate is a kind of kitchen electrical appliance which utilizing the principle of electromagnetic induction to convert electrical energy into thermal energy. Inside the cooking plate the rectifier converts the DC voltage into 20-40 KHz high-frequency voltages. When the high frequency current flows through the inductance coil, a fast-changing magnetic field is generated. As the magnetic lines of force in the field pass through the bottom of a metal pan, the ware itself heats rapidly and the food in the pan will be heated up. As induction cooker features convenient use, no smoke, no open flame, no exhaust gas and easy cleaning, it has been regarded as environment-friendly and fashionable kitchen appliance, so it is increasingly in the good graces of consumers.
Suitable pan ware
- Note: check before you start cooking whether the pan you use is suitable for induction cooking.
- Materials: iron, stainless steel, iron cast and heat-resistant glassware with magnetic inductive layer.
- Form: pan with flat round bottom (the diameter of the flat bottom shall be larger than 12cm. and not bigger than 24cm.)
Unsuitable pan ware
- Materials: Nonferrous metal, ceramics, glass, pan with bottom as copper or aluminium (multi-layer metal pan).
- Form: Pan with a very uneven bottom, pan with bottom diameter less than 12 centimeters.
USE
- Connecting to power supply: Insert the power plug into the power socket of AC230V/10A. The display shows “—-“, it means the power is connected and the appliance is in standby status, touch the On/off button to switch on the appliance.
- Placement of the pan: Place the pan and put food to be cooked in the pan directly and then put the loaded pan at the centre position of the heating panel of the appliance.
- Touch the function buttons to select the different cooking functions, settings and adjustments.
- To switch off, touch the On/off button again and plug out the shut of the power supply.
- Note: the cooking surface remains hot for some time after use.
- Note: the unit is equipped with overheat protection. If the pot or pan gets too hot, the unit will switch off automatically. Wait for the unit until it’s cooled down and try it again.
Adjustable functions
- To select the desired wattage touch the power button, the “W” led will light on. You will be able to adjust the power between 200-2000W with the Up and Down buttons.
- To select the desired time touch the timer button, the “T” led will light on. You will be able to adjust the time from 0:01 minutes to 3:00 hours with the Up and Down buttons.
- To select the desired temperature touch the temperature button, the “°C” led will light on. You will be able to adjust the temperature from 60°C to 240°C with the Up and Down buttons.
- Touch the On/off button again to recover the time set function.
FAILURE CODES
Failure | Possible reasons | Solution |
---|---|---|
E0 | There is no pot/pan or an unsuitable pot/pan on the induction cooker |
place or change the pot/pan
E1| Supply voltage is too low (less than 85V)| Check the power supply
E2| Supply voltage is too high (more than 275V)| Check the power supply
E3| Plate surface temperature sensor is not connected well, or short-
circuited.| Check after one minute again
E4| The heat sensor of the radiator is not connected well, or short-circuited|
Check after one minute again
E5| The temperature of the plate surface is too high (more than 240°C)| Wait
for some minutes until the unit is cooled down
CLEANING AND MAINTENANCE
- Before cleaning, unplug the appliance and wait for the appliance to cool down.
- Wipe the outside with only a slightly moistened cloth ensuring that no moisture, oil or grease enters the cooling slots.
- Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pads or steel wool, which damages the appliance.
- Never immerse the electrical appliance in water or any other liquid. The appliance is not dishwasher-proof.
ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its durability but must be offered at a central point for the recycling of electric and electronic domestic appliances. This symbol on the appliance, instruction manual and packaging puts your attention to this important issue. The materials used in this appliance can be recycled. By recycling used domestic appliances, you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection.
Support
You can find all available information and spare parts at
www.tristar.eu
WWW.TRISTAR.EU Tristar Europe B.V. | Swardvenstraat 65 5048 AV Tilburg | The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>