SCHIIT ARTF0319 Fulla 4 Dac/Amp for Gaming User Guide
- June 6, 2024
- SCHIIT
Table of Contents
SCHIIT ARTF0319 Fulla 4 Dac/Amp for Gaming
FULLA E CONTROLS & CONNECTIONS
-
Volume Knob. Turn up til you smile, but not until your ears bleed.
-
Microphone Input. If you’re using a headset microphone, connect it using the pink plug on the Y-adapter that is usually included with your head-phones. Do not use a TRRS jack; it will not work.
-
Headphone Output. Plug your headphones in here. If you are using headphones with a headset microphone, plug the green plug from the Y-adapter that is usually included with your head-phones. You may also need to use the included 1/4” to 1/8” adapter. Do not use a TRRS plug; it will not work.
-
Preamp Output. Plug this in to your powered monitors (or a power amp) using a 1/8” TRS to dual RCA cable (for most products —others may need different cables, consult the manufacturer.)
-
Optical Input. Connect to a smart TV or other device with an optical output. Some smart TVs will need to be set to “Stereo” or “Two-Channel PCM” for this to work. Fulla 4 will automatically switch to the optical input when it is active–it takes precedence over the USB input.
-
USB Power Input. If you get a “this device draws too much power” error, or if your source doesn’t “see” the Fulla, connect this input to 5V DC at 500mA or above with a USB-C cable. Your phone charger may work just fine (if it uses USB-C connectors, that is.)
-
USB Power and Data Input. Connect this to your computer or other USB source using the provided micro USB cable, or with another USB 2.0-rated, high-quality micro USB cable.
FULLA E OPERATION
Select “I’m Fulla Schiit” in Control Panel/Sound Devices (PC) or in System
Prefs/Sound (Mac) or in the setup for your console.
On some systems, some music players will have to be set to “I’m Fulla Schiit”
too.
That’s it! Enjoy the game, a movie, or some music (or suffer though that Zoom
call, argh.)
WHAT’S IN THE BOX
- (1) Fulla E
- (1) 3’ USB-C to USB-A cable
2-YEAR LIMITED WARRANTY
Schiit Audio warrants to the original purchaser that this product shall be
free from defects in material and workmanship for two (2) years from the date
of purchase. If a defect covered by this warranty occurs during this period,
Schiit Audio will repair the defective product, free of charge. Date of
purchase will be based on customer receipts, otherwise date of manufacturing
will be used.
If you believe you need warranty service, contact us first. Schiit Audio
products sent back to us without a Return Authorization (RA) will be returned
to the sender without repair. To contact us and obtain an RA, email
info@schiit.com
Warranty Limitations. This warranty shall not apply if a product: (a) is
modified or tampered with; (b) is damaged by negligence, accident,
unreasonably use, or other causes unrelated to defective materials or
workmanship, or (c) has had the serial number altered or removed.
Any implied warranties, including warranties of merchantability and fitness
for a particular purpose, are hereby limited in duration to the warranty
period. In no event shall Schiit Audio be liable for consequential or
incidental damages resulting from the breach of any implied or expressed
warranties. Some states do not allow these limitations, so they may not apply
to you. You may also have other rights which vary from state to state or
province to province.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
Application for Council Directives
72/23/EEC, 89/336 EEC
Conformity declared for EN60065,
EN55022 Class B, EN50082-1