ViewZ Led Cctv Monitor User Manual

ViewZ Led Cctv Monitor User Manual

www.viewzusa.com

SAFETY INSTRUCTION

Important Safety Instruction

1. Read all warnings.
2. Follow all instructions to ensure the longevity of the monitor.
3. Do not place the monitor near water.
4. Clean only with a dry cloth.
5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other heat-generating devices.
7. Do not override the safety purpose of the polarized or grounding-type plug.
8. A polarized plug has two blades with one wider than the other.
9. A grounding-type plug has two blades and a third grounding prong.
10. The wide blade or the third prong are provided for your safety.
11. If the provided plug does not fit into your outlet, consult with an electrician for replacement of the outlet.
12. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where it connects to the monitor.
13. Only use attachment/accessories specified by the manufacturer.
14. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the monitor. When a cart is used, use caution when moving the cart & monitor in combination to avoid
15. injuries.
16. Unplug the monitor during lightning storms or when unused for long periods of time.
17. Refer all servicing to qualified service personnel. Servicing is required when the monitor has been damaged in any way.

The monitor shall not be exposed to dripping or splashing and objects containing liquids, such as vases shall be placed near the monitor.
The monitor should have ample distance (e.g. 10cm) from the wall for sufficient ventilation.

Mark Indication and Substance

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This symbol is intended to alert the user to the presence of uninsulated & dangerous voltage within the monitor’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the monitor.

Warning

• Do not use damaged or loose cables and plugs.
• Do not pull the plug out by the wire nor touch the plug with wet hands.
• Use only a properly grounded plug and receptacle.
• Do not connect too many extension cords or plugs to one outlet.
• Do not excessively bend the plug and wire.
• Do not disconnect the power cord while it’s still plugged into the monitor.
• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.
• Never open the monitor. There are no user-serviceable parts inside and the opening will void the warranty.
• Removing covers may expose you to dangerous shock hazards or other risks.
• Keep any heating devices away from the power cable and monitor.
• Do not place the monitor near water.
• Do not insert objects of any kind into the monitor’s open slots, as they may touch dangerous voltage points.
• Please follow the laws and regulations of your municipality to dispose of the tube properly.
• Do not use the monitor in high temperatures, humid, dusty, or oily areas.
• Do not install the monitor where it will be exposed to continual vibration.
• Keep the plastic packaging out of children’s reach.
• If any damage defects upon first opening the box, contact the agency from which you bought the monitor directly.
• If your monitor does not operate normally ­ in particular, if there is any unusual sound or smell coming from the monitor ­ unplug it immediately and contact an authorized dealer or the service center.

Caution

• If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth.
• Make sure to unplug the power cord before cleaning the monitor.
• Make sure to leave a gap between the monitor and the wall.
• Do not drop the monitor when moving it.
• Place your monitor in a location with low humidity and minimum dust.
• Install the monitor base on a showcase or shelf so that the end of the base does not protrude from the showcase or shelf.
• Do not place the monitor on an unstable or small surface area.
• Do not install inside a vehicle.
• Disconnect the plug from the outlet during storms or lightning or if it has not been used for a long time.
• Do not try to move the monitor by pulling on the power cord.
• Do not cover the vents on the monitor.
• When moving the monitor, turn it off and unplug the power cord. Make sure that all cables, including HDMI cable and cables connected to other devices, are disconnected before moving it.
• Place the monitor out of children’s reach, as they could damage it by hanging onto it.

Available Temperature & Humidity

• Operating Temperature : 14°F ~ 122°F / -10°C ~ 50°C
• Operating Humidity : 20 ~ 70% RH

Dot Defect (dead pixel) of TFT

ViewZ monitors are manufactured using high-end semiconductor technology with precision ratings of 99.9% and above. However, it may be the case that certain RGB and white pixels seem darker (or entirely unlit i.e. black).

Modern production methods cannot guarantee an absolute fault-free monitor. To this effect, no LED manufacturer can guarantee a defect-free panel. A few isolated pixel or sub-pixel faults are considered tolerable and different policies exist that govern the amount of these tolerable values.

While most pixel faults occur in isolated regions, a cluster of dead pixels or sub-pixels can sometimes form for which a separate ruling applies. A cluster is defined as an area of 5×5 pixels. ViewZ’s policy on pixel failure: either as an isolated fault or in the form of a cluster is outlined on the website: www.viewzusa.com

FCC RF INTERFERENCE STATEMENT

Note
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio, TV technician for help.
• Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the user’s authority to operate such equipment.

DOC COMPLIANCE NOTICE This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the radio interference regulation of the Canadian Department of communications.

INSTALLATION

Installation Tools
The following tools may be required depending on your installation.

Assembly Components – provided

Your ViewZ monitor is shipped with all proper installation hardware and components. If there are parts missing and/or damaged, please stop the installation and contact ViewZ USA at (888)-998-4399.

Mounting Option

Your ViewZ monitor is compatible with ViewZ monitor mounts. For more information, please contact ViewZ USA at (888)-998-4399.

Wall Mount

Interface Input Ports

The following image is the description of interface input ports of the BNC Monitor

1. DC 12V IN
2. HDMI IN
3. VGA IN
4. BNC (Composite) IN
5. BNC (Composite) OUT
6. Audio IN / OUT

REMOTE FUNCTION

Remote Controller

1. Power
2. Picture
3. Freeze
4. Up
5. Left
6. Menu
7. Right
8. Down
9. Mute
10. Input
11. VGA Input Select
12. YPbPr Input Select – Not Activate
13. HDMI Input Select
14. AV Input Select
15. S-Video Input Select – Not Activate
16. DVI Input Select – Not Activate

Display image, sound, and custom settings can be adjusted in OSD (On Screen Display) menu by Remote Controller. To adjust monitor setting value :

1. Press the ‘ MENU ‘ button to enter the OSD menu
2. Press the ‘ INPUT ‘ button to select the input source
3. Press the ‘ FREEZE ‘ button to freeze the current display image On / Off – only available on the remote controller
4. Press the buttons to select the desired sub-menu. The selected submenu will be highlighted
5. Press the ‘ MENU ‘ button to enter the sub-menu for adjusting items
6. Change the value you wish to adjust by using the buttons
7. Press the ‘ MENU ‘ button to confirm / exit for saving adjustment value on sub-menu
8. Without entering OSD MENU, press buttons to adjust the audio volume
9. Without entering OSD MENU, press HDMI, AV & VGA buttons to select desired input source
10. Press the ‘ MUTE ‘ button to on/off audio – audio only works with VGA / AV input

CONTROL AND FUNCTION

On Monitor, Button Control

1. Source Select an input source
2. Menu
3. Enter the sub-menu, save the adjustment of submenu or exit the OSD / Select a menu on OSD
4. Left & Right (VOL) Change the value on the selected menu
5. Up & Down Switch a menu on OSD
6. Power Monitor power on / off
7. LED Indicator
   Green color: monitor on
   Red color: monitor off
   Red (Blinking) color: power-saving mode

Monitor Button Function

All pictures, sound settings, and setup can be adjusted in OSD (On Screen Display) menu. To adjust the OSD screen:

1. Press the Menu button to enter the OSD menu
2. Press the buttons to select the desired sub-menu. The selected sub-menu is highlighted
3. Press the Source button to enter the sub-menu to adjust different items
4. Change the value you wish to adjust by using the buttons
5. Press the Menu button to confirm the adjustment on sub-menu
6. Press the button to exit the sub-menu and go back to the previous menu
7. Press the Menu button to exit the OSD menu

Select Input Source

Press the’ SOURCE’ button on the monitor or the ‘INPUT’ button on the remote controller
Press buttons to change the input source

Volume

Press buttons to adjust the volume

Detect Source Signal Message
If you connect any input source, then the monitor will display the current input source resolution and frequency.

Picture

1. VGA-input support
2. AV-input support
3. HDMI-input support

1. To set custom color temperature (R, G, B values), select “USER” to set color temperature. Keep pushing the ‘Down’ button on the monitor or the remote controller, then you will see the Red, Green, and Blue option

OSD

Function

Sound

1. Available in Composite ( video ) / HDMI input

MOUNTING GUIDE

Wall Mounting (Optional)
VZ-CMP monitors are suitable for VESA wall mount (not included in the delivery).

1. VZ-19CMP, VZ-22CMP, VZ-24CMP : VESA WALL MOUNT 75mm x 75m

Attention!

VZ-CMP: You must use 4 * M4 x L10 screws to assemble this monitor and the wall mount bracket.

WARNING!
If the user uses screws longer than M4 x L10 mm, it may cause damage to the unit. Please use a bolt of the correct size and length as instructed.

Mounting Safety!
At least two people are recommended to safely install the mount.

SPECIFICATION

TROUBLESHOOTING GUIDE

– Check the following before calling for service.
– If the same problems continue after checking, contact the reseller you purchased the monitor from.

TERMS OF WARRANTY / RMA

– The warranty period for this monitor is 3 years. The warranty will be voided for the scenarios listed below.
– You can also download the manual and information on the VIEWZ website: VIEWZUSA.COM

Cases of Non-Warranty Coverage

When power feed to the monitor exceeds capacity and causes damage
Accident, Abuse, Misuse, Neglect, Fire, Water/liquids, Lightning or any act of nature
Damaged by dropping, throwing, and hitting the monitor
Failure caused by users attempt to modify the product
Failure by limited life of parts such as LED Lamps and any other consumables
Damaged by using the third party power cable, unstable power input, and electric shock
When shipping the monitor for RMA, make sure to pack safely to ensure the monitor is not damaged during shipping.

• Above information can be changed without notification – please check our website or contact ViewZ representative for the latest RMA service policy.

NOTE

WARRANTY

ViewZ USA
LIMITED 3 YEAR WARRANTY

What and Who is Covered by this Limited Warranty and for How Long
ViewZ USA warrants this product to be free from defects in material and workmanship for 3 YEAR of the original owner of this product. The limited warranty is valid only for the original purchaser of the product.

What ViewZ USA Will Do
At the sole option of ViewZ USA, ViewZ USA will repair or replace any product or product part that is defective. If ViewZ USA chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs.

What is Not Covered; Limitations
ViewZ USA DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS, DISPLAYS, PROJECTORS, OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN WHOLE OR IN PART, FROM IMPROPER INSTALLATION, MODIFICATION, USE, OR MISUSE OF ITS PRODUCTS.

ViewZ USA DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ViewZ USA IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PRODUCTS OR PARTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

What Customers Must Do for Limited Warranty Service
If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address below within thirty (30) days. Proof of purchase (an original sales receipt) from the original consumer purchaser must accompany all warranty claims. Warranty claims must also include a description of the problem, the purchaser’s name, address, and telephone number. General inquiries can be addressed to ViewZ USA Customer Service at 1-888-998-4399. Warranty claims will not be accepted over the phone or by fax.
ViewZ USA
Attn: Warranty Claim
177 W. Orangethorpe Ave.
Placentia, CA 92870
How State Law Applies
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Disclaimer

ViewZ USA intends to make this manual accurate and complete. However, ViewZ USA makes no claim that the information contained herein covers all details, conditions, or variations, nor does it provide for every possible contingency in connection with the installation or use of this monitor. The information contained in this document is subject to change without notice or obligation of any kind. ViewZ USA makes no representation or warranty, expressed or implied, regarding the information contained herein. ViewZ USA assumes no responsibility for the accuracy, completeness, or sufficiency of the information contained in this document.

Contact Us

NORTH AMERICA
177 W. Orangethorpe Ave.
Placentia, CA 92870
USA and Canada
Phone: 1-888-998-4399
Fax: 1-714-996-1138
Other Locations
Phone: (001) 888-998-4399
Fax: (001) 714-996-1138

Visit the ViewZ USA website at https://www.viewzusa.com

References

• ViewZ – Driving Visual Innovation
• ViewZ – Driving Visual Innovation
• ViewZ – Driving Visual Innovation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>