TANNOY Digitally Steerable Powered Column Array Loudspeaker Instruction Manual
- June 7, 2024
- TANNOY
Table of Contents
Quick Start Guide
QFLEX 16LS-WP
Digitally Steerable Powered Column Array Loudspeaker with 16 Independently
Controlled Drivers, Integrated DSP, and BeamEngine GUI Control for Life Safety
Installation Applications (Weather Protected)
Important Safety Instructions
Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modifications should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear
section).
No user-serviceable parts inside. Refer servicing to qualified personnel.
Caution
To reduce the risk of fire or electric shock, do not expose this appliance to
rain and moisture. The apparatus shall not be exposed to dripping or splashing
liquids and no objects filled with liquids, such as vases, shall be placed on
the apparatus.
Caution
These service instructions are for use by qualified service personnel only. To
reduce the risk of electric shock do not perform any servicing other than that
contained in the operation instructions. Repairs have to be performed by
qualified service personnel.
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with a dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Use only attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
-
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
-
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and you’re national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
-
Do not install in a confined space, such as a bookcase or similar unit.
-
Do not place naked flame sources, such as lighted candles, on the apparatus.
-
Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a
battery collection point. -
Use this apparatus in tropical and/or moderate climates.
LEGAL DISCLAIMER
MUSIC Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and COOLAUDIO are trademarks or registered trademarks of MUSIC Tribe Global Brands Ltd. © MUSIC Tribe Global Brands Ltd. 2018 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding MUSIC Tribe’s Limited Warranty, please see complete details online at musictri.be/warranty.
Introduction
Congratulations on the purchase of your new QFlex-WP loudspeaker.
Tannoy has developed the QFlex Life Safety (LS) models as a cost-effective
solution for critical, life safety applications, a solution that balances
complex power consumption needs with the high performance and intelligibility
that is the core of the proven QFlex range. Based on Tannoy’s superior
knowledge and heritage of speech intelligibility in critical listening in
difficult acoustic environments, the new models have an optimized driver
placement and improved current draw, making them perfect for applications
where emergency voice alarms or communications may be required.
The new QFlex 16LS column loudspeaker is designed primarily for large
transportation hubs as part of a PA/VA system where speech is the main audio
source, either from live announcements or via a pre-recorded message. These
new QFlex life safety models are specifically intended to optimize voice
reinforcement, and as a result, make them more affordable.
The weather-proofed (WP) versions of QFlex provide protection against water
and dust ingress to the IP54 standard. These enhanced QFlex models benefit
from gasket sealed enclosures, solid aluminum rear panels, grade 304
stainless steel mounting hardware and sealed cable gland on the input and
power connector. This specification makes QFlex capable of operating in more
challenging environments where limited moisture and dust/airborne contaminants
are an issue.
The simple-to-use BeamEngine software allows accurate adjustment of coverage
area from a fixed, vertical mounting location. In addition to excellent vocal
performance, the QFlex range is fully capable of full-range music applications
and can also be used in conjunction with any VNET subwoofer. Implementation of
the network between nodes is via high-quality rugged Neutrik Ethercon
connectors, which are compatible with standard RJ45 plugs, and CAT5 cable.
Each speaker has a unique address for auto-location on the network. System
commissioning and ongoing venue network control, incorporating real-time
diagnostics of electronics and drive units, are all managed by the exclusive
VNET software package.
Unpacking
Every Tannoy QFlex product is carefully tested and inspected before being packaged and leaving the factory. After unpacking your loudspeaker, please inspect for any exterior physical damage, and save the carton and any relevant packaging materials in case the loudspeaker again requires packing and shipping. In the event that damage has been sustained in transit, notify your dealer immediately. Each QFlex carton is marked to show each module’s position in the array.
Models
| Model | Modules |
|---|---|
| QFlex 16LS-WP | 1x QFlex 8M-16LS-WP + 1x QFlex 8ST-16LS-WP |
Connections
NOTE: QFlex is a professional product intended for installation by
properly qualified and certificated personnel.
Cable Management
All connections (AC, Network, and Signal) are accessed at the bottom of the
QFlex column. This allows for neat, unobtrusive cable management in your
installation. The connectors will not be visible when installation is
complete. Connections are accessed by the removal of the lower rear access
plate on a QFlex master which will
require the use of a Philips screwdriver.
With the plate removed the connector areas look like this
Assembly
Place each module in its respective position on the assembly area keeping them slightly spaced apart. All electronic components are housed in the master module of a QFlex 16LS. Connect the multipin connectors as shown.
Align the two columns together as shown below.
Having the hinge points on
either side of the QFlex column allows the loudspeaker to be rotated at 90
degrees to the mounting structure allowing easy access to the input connector
panel.
The installer must ensure that the mounting surface is capable of safely and
securely supporting the loudspeaker. Seek help from architects, structural
engineers, or other specialists if in any doubt.
Attach the joining plates in the three stages as shown. Only one wall bracket is required to mount the two modules. For flexibility, the wall bracket can be mounted to either the top or the bottom column. The wall bracket can be hinged on the left or right pivot points. 3mm Allen grub screws allow the QFlex to be locked at the desired horizontal angle.
Mounting
QFLEX 16LS-WP
For mounting instructions and schematics, please refer directly to QFlex
Operations Manual – available at Tannoypro.com.
Software
The BeamEngine and VNET (Podware) software applications are needed to operate
the QFlex speakers. Refer to the VNET and QFlex manuals for information
on installation and operation. Visit tannoy.com to download all associated
documents for the QFlex line.
Ambient noise sensing feature
Specifications
QFlex 16LS-WP
Configuration|
---|---
4′ LF| 16
No. damp <tunnels 100W 011.151 a1, 4 Ohms| 16
Vertical dispersion| 5- KO degrees symmetrical or asymmetric,
singk a muttipk beats
Frequency range| 150 112 – 1311Hz
Horaontalospersim| 120 degrees
Awning zsgkloot| +bar/Smuts
LI beam control limit| 230Hz
Wrote SM. 0 100 ft (30 lor| 994
Column height| 23193mm09n
Column wdth| 150 mm (53′)
Column depth| 2144 ea MS,
Typical awe Oman”| Up to64m (YAW
Sample rate| %kHz
Mao spats| Anakque &AESIBU
Weight 0rnt hardware)| 36.3 kg 180.0 DS))
kneesocks| YliET USS Interface, MI Ethernet Interface,
VIIET2-Ozate er doe, WET lateiixe Power _Sop,
_ Sentinel SMI System Aloitok
MS Break-In box, OkaIsolator
Mains supply| 100.240V- 50.160Hz
Power** cottonnion| 140W0% max power
- Note: The maximum power requirements for QFlex models are 1000 W
Other important information
Important information
-
Register online. Please register your new MUSIC Tribe equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
-
Malfunction. Should your MUSIC Tribe Authorized Reseller not be located in your vicinity, you may contact the MUSIC Tribe Authorized Fulfiller for your country listed under “Support” at behringer.com.
Should your country not be listed, please check if the problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. -
Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
FEDERAL COMMUNICATION COMMISSION COMPLIANCE INFORMATION
Responsible Party Name: MUSIC Tribe Brands UK Ltd.
Address: Klark Industrial Park, Walter Nash Road,Kidderminster,
Worcestershire, DY11 7HJ United Kingdom
Phone Number: +44 1562 732290
QFLEX 16LS-WP
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This product conforms with essential requirements of EMC Directive 2014/30/EU,
LV Directive 2014/35/EU, RoHS Directive 2011/65/EU, and WEEE Directive –
2012/19/EU.
Warning: Operation of this equipment in a residential environment could
cause radio interference.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>