FeiyuTech VIMBLE 3-Axzis Stabilized Handheld Gimbal for Smartphone Instructions

: June 7, 2024
: FeiyuTech

FeiyuTech VIMBLE 3-Axzis Stabilized Handheld Gimbal for Smartphone

product

Overview

Accessories

Start to Use

TIPS

Please fully charge the battery before powering on the gimbal for the first time.
If the power is too low, the red light will flash three times every five seconds that indicating you should charge it immediately.
When not in use, power off the gimbal.
Unlock the three axis clamp before powering on the gimbal.

Charging

Connect the USB cable to charge. The indicator light is red when charging, and green when fully charged.

Positioning Lock

Each of the tilt axis and roll axis has positioning lock for storage purposes.

Smartphone Installation

Place smartphone in holder so that the phone is snug against the back of the holder.
It’s recommended to remove your smartphone protective case.
Smartphone holder width range : 57-84mm.

Balancing

If the smartphone tilts to left or right after installed the smartphone, please slide the cross arm to the opposite direction which the smartphone tilts to to balance.

Power ON / OFF

Make sure unlock the roll and pan lock before powering on the gimbal.

Power ON Long press the function button and release it when you hear the tone. （Green light will change to blue）

Power OFF Long press the function button and release it when you hear the tone. （The red light will turn off）

Function Operation

Function / Modes Introduction

Pan Mode(Default mode）
The roll and tilt direction are ﬁxed, and the smartphone moves according to the left-right movements of the user’s hand.

Lock Mode
The orientation of the smartphone is ﬁxed.

Follow Mode
The roll direction is ﬁxed, and the smartphone moves according to the left- right movements, up-down movements of the user’s hand.

Reset
Return to panning mode, three axises return to default position.

Manual Lock
Slide the tilt axis to one position for shooting.

Landscape and Portrait Shot
Assist landscape or portrait shooting.

Joystick

Function Button Operation

Function button	Function
Single tap	Pan Mode (Click once)

Lock Mode (Click again)
Double tap| Follow Mode
Triple tap| All Follow Mode
Quintuple tap| Gimbal Initialization

( Single click the function button to wake up )

Long press| Power ON / OFF

The button’s operation function can be modiﬁed on App, after connecting Feiyu ON App succeeded.

Shutter Button Operation

The gimbal can control the photography after only Bluetooth is connected with smartphone.

Connect Smartphone
Bluetooth connection

Power on the gimbal, open smartphone bluetooth.
Choose below Bluetooth connection way:
After Bluetooth connecting successful, the shutter button is activated.

The green light ﬂashes once while other indicator status (About every 5 seconds ﬂashes once)

Shutter Button|

Function

| Control the App Feiyu ON| Control smartphone camera *****

via bluetooth

---|---|---|---

Single click

| Photography|

|

Video

( Click again to end the recording the video )

|

Double click| Switch to photo / video mode|

|

Triple click| Switch front and rear camera| |

Long time press| Video recording in shooting mode

( Long press the shutter button again to end the recording )

|

Focus Button Operation

Focus Button	Function
Sliding up-down	Adjust focus (Adjust ﬁeld-of-view)

Trigger Button Operation

Trigger Button	Function
Long press	Enter follow mode *( Release trigger button enter into

previous mode）
Double tap| Reset

Light Indicator Explanation

The current mode of the stabilizer can be identiﬁed by the indicator status.

Trigger Button Operation

Manually move camera to desired position, and hold for half a second, new tilt position is automatically saved.

Landscape and Portrait Shot Switching

Press buttons to switch

Hold the gimbal horizontally, press and hold the trigger button, and then single tag function button to switch between landscape and portrait mode.

Rotate the Smartphone Holder to switch

Switching portrait /landscape mode by manually rotate the smartphone holder left or right.

Gimbal Initialization

Initialize gimbal when:

Smartphone fails to remain level.
Gimbal has no been used for a long period of time.
Gimbal is used in extreme temperature variations.

STEP

Click the function button ﬁve times. The motors will stop working. Status indicator turns solid blue.
Place the gimbal on a ﬂat, horizontal surface. The gimbal will automatically initialize after a few seconds detecting no movement. The blue light will ﬂash three times to indicate end of initialization.
After the initialization is successful, click the function button to wake up.
Note : if the initialization is not successful, click the function button to wake up. restart initialization process.

Smartphone Charging

Charge the smartphone via cable and choose the corresponding cable according to charging port.

Connect and Use Feiyu ON App

Download the App

Scan the QR code to download the app, or search for “Feiyu ON” in the App Store or Google Play.
Requires iOS 9.0 or above, Android 6.0 or above.

Connect the App

Open Feiyu ON app and connect the gimbal via tips. Format Bluetooth of gimbal: FY_Vimble2S_XX

Shooting / control interface

Firmware Upgrade

Upgrade the ﬁrmware through the App.

Click the icon
Select upgrade type.
Follow the prompts to upgrade the ﬁrmware.

Upgrade type introductions:

Keyboard ﬁrmware update: Repair / update or newly add button/touch screen/interaction functions, update more compatibility cameras which can be controlled through WIFI, repair few bugs about camera control through WIFI, and etc.
Bluetooth ﬁrmware update: Repair / update or newly add Bluetooth functions, update more compatibility cameras, and etc.

Speciﬁcations

Disclaimer

Thanks for using Feiyu Gimbal. The information in this document aﬀects your safety and your legal rights and responsibilities. Read the entire document carefully to ensure proper conﬁguration before use, Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, or damage to your products or damage to other objects in the vicinity.

By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms, precautions, practices, policies and guideline

FeiyuTech has made and may make available. FeiyuTech accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of product.
FeiyuTech will not provide any service for any product obtained from abnormal channels.

Notice

Make sure motor spinning is not blocked by external force when gimbal is power on.
Gimbal DO NOT contact water or other liquid if the gimbal is not mark waterproof or splash-proof. Waterproof and splash-proof product DO NOT contact sea water or other corrosive liquid.
DO NOT disassembly the gimbal except marked detachable. It need send to FeiyuTech after-sales or authorized service center to ﬁx it if you accidently disassembly and cause abnormal work. The relevant costs are borne by user.
Prolonged continuous operation may cause the motor surface temperature to rise, please operate carefully.
DO NOT drop or strike batteries. If the battery is abnormal, contact Feiyu After-sales support.

Storage and Maintenance

Keep the gimbal and battery out of the reach of children and pets.
DO NOT leave the gimbal and battery near heat sources such as a furnace or heater. DO NOT leave the gimbal and battery inside of a vehicle on hot days.
Please storage the battery in dry environment.
DO NOT overcharge or overuse the battery, otherwise it will cause damage to the battery core
Never use the gimbal and battery when the temperature is too high or too low.

Oﬃcial Social Media