LEDBLE Fairy Light User Manual
- June 7, 2024
- LEDBLE
Table of Contents
LEDBLE Fairy Light User Manual
Product Diagram
Mobile APP below to check Installation
QR Code
http://url.szszjkj.com/79810915950
- Download the LED LAMP APP with your mobile phones by scanning the QR code then install it You may need log in when download APP from iPhone APP store or Google play store, or download this APP directly from Tencent APP store without login any account
- After the APP downloaded successfully, your need to turn on Bluetooth function on your phone firstly, then plug in the fairy light, then open the APP, your phone will pair with the fairy light automatically. Do not pair the Bluetooth controller manually at the mobile phone setting, some mobile phones may not find the Bluetooth controller, in this case the OS of mobile phone dose not support.
- 3.If the fairy light cannot be connect after the APP is opened, please follow the steps below to check
-
* if the fairy light is plugged in and powered normally,- if the APP on your phone is opened,
- if the fairy light is connect to other mobile phones, if yes, please disconnect and reopen the APP , and let it connect to Bluetooth automatically.
- if you connect the fairy light manually at the mobile phone Setting, if yes, please disconnect and reopen the APP, let it connect to Bluetooth automatically.
- if the operation still fails, please restart the phone and redo it.
Product Specification
| Name | Fairy light |
|---|---|
| Support OS | Android4.4 or above / iOS10.0 or above |
| Connection mode | Bluetooth4.0 |
| Plug type | USB plug |
| Waterproof level | IP65 |
Warning:
- Please note that only the copper wire waterproof rating is IP65 and can be soaked in water, the Bluetooth controller and the USB plug are
- With the USB plug, the fairy light can be powered by laptop, power bank, wall charger and etc.. please ensure that the input voltage is DC5V, over voltage will damage the Bluetooth controller and the copper wire.
Add device
Open the APP and click the “+” to add a new (Figure 1)
Device name: LED (Figure 2)
After addition, click the LED BLE to enter the APP main interface. (Figure 3)
APP Use Instruction:
-
This interface display the main menu and functions of the APP, your can change the fairy light color easily through this interface.
-
The Music interface has two Modes, music mode and microphone mode.Under music mode, the fairy light color changing sync to mobile phone music; Under microphone mode, the fairy light color changing sync to external sound.
-
Settings: you can set preference through this interface easily.
-
Timer: you can set the desired time period to turn on/ off the mode like static, jump, gradient, cold, warm and etc..
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>