Jandy Ultra-Compact And Energy-Efficient Gas Pool Heater User Manual
- June 7, 2024
- Jandy
Table of Contents
JXi ™ HEATER
POOL & SPA HEATER
AN ULTRA-COMPACT AND ENERGY-EFFICIENT
GAS POOL HEATER
NEW! ASME Certified Models Now Available
THE TOTAL PACKAGE
The JXi™heater sets the standard in pool and spa heating technology with its ultra-compact size, lightweight design, and energy-efficiency options that save on electrical costs. Providing extreme installation flexibility, this high-efficiency, low-NOx heater is a top choice for pool professionals and pool owners everywhere and is available in both natural and propane gas models.
ENERGY EFFICIENT
84% thermal efficiency rating and low-NOx design surpasses strict DOE Energy Efficiency requirement. Select JXi with VersaFlo ™ or add the optional VersaFlo Accessory Kit to reduce energy costs even more.
FASTEST INSTALLATION
Pro-driven features for the fastest, most customer-friendly installation
include:
Best Retrofit Option
Plumbing flexibility for quickMastertemp®and Max-E-Therm®replacement that
requires no plumbing adjustments.
Ultra-Compact
Lightweight Design
Easy to store, transport, and install, JXi ™ easily fits on a 2′ x 2′ pad and
is 38% lighter with a 28% smaller footprint.
*Compared to major competitor models
Flexible Installation
Top can be easily removed for increased accessibility and rotated 180 degrees so you never need to rotate headers. Also includes a flip-up electrical panel for convenient setup and service.
84% Thermal Efficiency applies to 260K and 400K BTU Models with Copper Heat
Exchangers, 200K BTU
and all models with Cupronickel heat exchangers are 83%, see back page for
complete model listing.
Versa Plumb® -Ready
Installation in the Versa Plumb system reduces plumbing costs and increases
energy efficiency, all using the smallest footprint available.
Sweep elbow included in all JXi models
**ASME Certified Models Now Available**
JXi™models are available with robust heat exchanger tubes and corrosion-
resistant bronze headers to meet the high stresses of commercial
installations.
Not available with VersaFlo Integrated Bypass technology
SAVE EVEN MORE WITH OPTIONAL
VERSAFLO ™INTEGRATED BYPASS
VersaFlo not available on ASME-certified models.
Here’s How:
» The heater is typically only used 3.5% of average annual pump runtime, the
other 96.5% of the time the heat exchanger can be bypassed.
» JXi with VersaFlo activates the built-in flow bypass valve based on call for
heat to avoid running water through the heat exchanger when water does not
need to be heated.
» When used with a variable-speed pump, JXi with VersaFlo requires
considerably less electricity, thereby providing for significantly reduced
electricity costs.
» VersaFlo Integrated Bypass is available on select models or can be easily
added to any JXi heater in the field.
Versus similar system without VersaFlo. See JXIVFKIT installation manual
for more details.
5-YEAR HEAT EXCHANGER WARRANTY
JXi heaters with VersaFlo factory installed receive an industry leading 5-Year
standard warranty
on the heat exchanger.
Bypass Mode
Heat Mode
ADDITIONAL FEATURES
| Weld-free combustion chamber for optimal corrosion resistance, models
available with copper or cupronickel heat exchangers.
---|---
| Venturi-driven air and gas
mix for enhanced
performance.
| Reliable, balanced flow and temperature control with thermal
regulator valve.
| Differentiated limit switches meet applicable product safety standards.
| Corrosion-resistant temperature sensors for reliable operation.
AVAILABLE IN THE FOLLOWING MODELS
Model #| Model #
with VersFlo
| Firing Rate| Gas Type| Heat
Exchanger
| Thermal
Efficiency
| Dim A| Weight| Vent
Diameter*
| Minimum
GPM
| Maximum GPM
---|---|---|---|---|---|---|---|---|---|---
JXi200N| JXi200NK| 200K BTU| Natural Gas| Copper| 83%| 34.5| 117 lbs.| 6″ (15
cm)| 30| 100
JXi260N| JXi260NK| 260K BTU| Natural Gas| Copper| 84%| 34.5| 120 lbs.| 7″ (18
cm)| 30| 100
JXi400N| JXi400NK| 399K BTU| Natural Gas| Copper| 84%| 34.5| 126 lbs.| 8″ (20
cm)| 30| 100
JXi400NN| | 399K BTU| Natural Gas| Cupronickel| 83%| 34.5| 126 lbs.| 8″ (20
cm)| 30| 100
JXi200P| JXi200NK| 200K BTU| Propane| Copper| 83%| 34.5| 117 lbs.| 6″ (15 cm)|
30| 100
JXi260P| JXi260PK| 260K BTU| Propane| Copper| 84%| 34.5| 120 lbs.| 7″ (18 cm)|
30| 100
JXi400P| JXi400PK| 399K BTU| Propane| Copper| 84%| 34.5| 126 lbs.| 8″ (20 cm)|
30| 100
JXi400PN| | 399K BTU| Propane| Cupronickel| 83%| 34.5| 126 lbs.| 8″ (20 cm)|
30| 100
JXiVFKIT| JXiVFKITK| JXi VersaFlo Accessory Kit (Not compatible with ASME
certified heaters)
ASME Certified JXi Heaters (Not available with VersaFlo Integrated Bypass technology)
Model #| Firing Rate| Gas Type| Heat
Exchanger
| Thermal
Efficiency
| Dim A| Weight| Vent
Diameter*
| Minimum
GPM
| Maximum
GPM
---|---|---|---|---|---|---|---|---|---
JXi260NC| 260K BTU| Natural Gas| Copper| 84%| 31.6| 163 lbs.| 7″ (18 cm)| 30|
100
JXi260PC| 260K BTU| Propane| Copper| 84%| 31.6| 163 lbs.| 7″ (18 cm)| 30| 100
JXi400NC| 400K BTU| Natural Gas| Copper| 84%| 31.6| 168 lbs.| 8″ (20 cm)| 30|
100
JXi400PC| 400K BTU| Propane| Copper| 84%| 31.6| 168 lbs.| 8″ (20 cm)| 30| 100
- Minimum vent pipe size for Category I installations.
2 units per pallet. Trade Series Exclusive product; not available for Internet sale.
Jandy.com | 1.800.822.7933
©2020 Zodiac Pool Systems LLC. All rights reserved. ZODIAC
®is a registered trademark of Zodiac International,
S.A.S.U., used under license. All other trademarks are the property of their
respective owners. 5878_SL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>