Gorilla Gadgets Wall Mount Thermometer Installation Manual
- June 7, 2024
- Gorilla Gadgets
Table of Contents
Gorilla Gadgets Wall Mount Thermometer Installation Manual
WMT5
1. Introduction
2. Specification
- Accuracy: +0.2 degrees ( 93–113°F, place it in the operating environment for 30 minutes before use)
- Abnormal automatic alarm: flashing+”Di Di” sound
- Automatic measurement: measuring distance 2 in 4 in
- Screen: Digital display
- Charging method: USB charging or battery(18650 Li-ion).
- Install method: nail hook(optional), double-sided adhesive sticking, bracket fixing (optional)
- Environment temperature: 50°~ 104 °F (Recommended 60°F ~ 95°F )
- Infrared measuring range: 32~122°F
- Response time: 0.55
- Input: DC 5V
- Net weight: 350g
- Dimension: 170 115 140mm
- Standby: About one week
- Counting capacity: 999
3. Status Description
- Standby: The red dot on the bottom of the display lights up in turn.(Fig. 1)
- Insufficient power: The horizontal bar lights up in the middle of the display. (Fig. 2)
- Normal temperature: Flashing green lights and alarm “Di”.(Fig. 3)
- Abnormal temperature: Flashing red lights and alarm “DiDi”. (Fig 4)
- Default
“Lo”: Ultra-low temperature alarm. (Fig. 5)
“HI”: Ultra-high temperature alarm. (Fig.6)
4. Operation Instruction
- Temperature measurement: Place your forehead 2 – 4 inches away from the sensor. (Fig 7)
- Mode switching: There is a small hole on the back of the device(Fig. 8). You can use a 3mm diameter screwdriver to insert it into the hole and then press the button. (1) Temperature unit: Press ‘mode switch hole’ then select”C” or “F” (Fig. 9, 10) C: Celsius F: Fahrenheit
3. Install and replace the battery
- Remove three screws on the back of the thermometer
- Open the back base and install 18650 Li battery
How to connect and use Bluetooth
Step 1: Download the app by scanning the QR code
www.gorillagadgets.com
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Loading......