Gorilla Gadgets Wall Mount Thermometer User Guide
- June 7, 2024
- Gorilla Gadgets
Table of Contents
WMT5
User Guide
Introduction
Specification
- Accuracy: ± 0.2 degrees ( 93~113 ºF, place it in the operating environment for 30 minutes before use)
- Abnormal automatic alarm: flashing+”Di Di” sound
- Automatic measurement: measuring distance 2 in~4 in
- Screen: Digital display
- Charging method:USB charging or battery(18650 Li-ion).
- Install method: nail hook(optional), double-sided adhesive sticking, bracket fixing(optional)
- Environment temperature: 50°~ 104°F (Recommended 60°F ~ 95°F )
- Infrared measuring range:32~122 F
- Response time: 0.5s
- Input: DC 5V
- Net weight: 350g
- Dimension: 170 115 140mm
- Standby: About one week
- Counting capacity: 999
Status Description
-
Standby: The red dot on the bottom of the display lights up in turn. (Fig.1)
-
Insufficient power: The horizontal bar lights up in the middle of the display. (Fig. 2)
-
Normal temperature: Flashing green lights and alarm “Di”.(Fig. 3)
-
Abnormal temperature: Flashing red lights and alarm “DiDi”. (Fig 4)
-
Default
“Lo”: Ultra-low temperature alarm. (Fig. 5)
“HI”: Ultra-high temperature alarm. (Fig.6)
Operation Instruction
-
Temperature measurement: Place your forehead 2 – 4 inches away from the sensor. (Fig 7)
-
Mode switching: There is a small hole on the back of the device(Fig. 8). You can use a 3mm diameter screwdriver to insert it into the hole and then press the button.
(1) Temperature unit: Press ‘mode switch hole’ then select”C” or “F” (Fig.9,
- C: Celsius
F: Fahrenheit
-
install and replace the battery
(1) Remove three screws on the back of the thermometer
(2) Open the back base and install 18650 Li-battery
-
install method
**How to connect and use Bluetooth
**
Step 1: Download the app by scanning the QR code
https://itunes.apple.com/cn/app/id1517342680?mt=8
http://fir.leijiaxq.top/3wrn?utm_source=fir&utm_medium=qr
Step 2: After downloading the app. You will be prompted to enter your name
Step 3:Click the icon on the top right corner to connect your device to the thermometer
Step 4: Click on to see temperature measurement from the thermometer in real- time
Step 5: Click on to add mutiple profiles 8 Step 6: Click on (Body. temperature
alarm setting” to set a number for temperature at or past which alarm will go
off
Step 7: Click on to see the trend of temperature during different hours of the
day
Step 8: Click on to see ihe history of en) temperature data for multiple dates and times
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>