Plustek OpticPro Series User Guide
- June 7, 2024
- plustek
Table of Contents
Plustek OpticPro Series Quick Start Guide
1. Unpack and Connect the Scanner
2. Install and Scan a document
Insert the product DVD or download and run your product’s software package: https://plustek.com/a3fb/
Check the system tray to see if the installation was successful.
Scan Button (Graphics)
Useful Tips: Apply Color Matching: This option uses the default parameters (sRGB profile) to adjust the colors of the image.
File Button
Useful Tips:
- Select desired utility, for example: File Utility.
- If you want to scan a batch of documents, check the box Continuous Scan.
OCR Button
PDF Button
Useful Tips: If you want to scan a batch of documents, please check the box Continuous Scan. A dialog countdown will appear to place the next page.
FAQ/Troubleshooting
For more information, please visit https://plustek.com/a3fb/faq/
FAQ 1: The colors of the scanned images are strange.
Solutions:
Please select Document Type according to your scan material. If the
selection is not matched , the scan results may not be satisfied. If the image
is not improved, please apply the solutions of FAQ 3.
FAQ 2: The countdown for Continuous Scan is too short.
Solutions:
Click Global Settings button, select Scan Continuously tab to
adjust the interval time. You may set to 0 to manually start the next scan
without the countdown timer.
FAQ 3: There are some stripes on the scanned image, or the crop image is not correct.
Solutions:
Clean the scanner glass with cloth.
Change the resolution, click Apply button and perform a scan to calibrate the
scanner.
Technical Support
For Customer Support refer to Plustek Technical Support Site
https://plustek.com/us/support/technical-support-form.php
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>