plustek OpticFilm series OF8200iSE Scanner User Guide

OpticFilm series OF8200iSE Scanner
User Guide

Unpack and Connect

Scan me — Installation Tutorial video

• 35 mm IT-8 Target (Only for OF8200i Ai)

Place Film in the Holder

If you are installing the software without a CD/DVD drive, please refer to For Mac/PC without a CD/DVD drive section on the rear side of this guide.

Install Software

Insert the product CD and run your product’s software package.

• You do not have to install any scanner drivers when installing the scanner under Mac OS. The scanner drivers are already included within the SilverFast installation.

Unlock SilverFast

1. Check Image Source and Language Selection, then click Start.
   Attention: If the Image Source is blank, please check if your scanner is properly listed under [Imaging Devices] in [Device Manager].

2. Enter your First name, Last name, and Serial number, then click Unlock.

• The SilverFast DVD-ROM should remain in the DVD-ROM drive for the Unlock process.
  The SilverFast serial number is located on the front of the SilverFast DVD-ROM case.

For Mac/ PC without a CD/DVD drive

Please visit https://plustek.com/download- silverfast8-film/

Step 1
Download and install the required driver and SilverFast software
Step 2
Click
to see the guide to unlocking SilverFast with a CD/ DVD drive.

Step 3
Register SilverFast 8 software firstly. Please remember the registered e-mail address.

Step 4
Exchange SilverFast serial number

FAQ

1. Why can’t I start the SilverFast software?
   Check if the Image Source is blank if it is blank:
   a. Make sure the USB cable and power cord are connected properly.
   b. Check if your scanner is properly listed under [Imaging Devices] in [Device Manager].

2. How to do the SilverFast software reset?
   a. Click [Service Dialog] in the SilverFast welcome screen.
   b. Select [Software reset] resets this software to the factory settings. (All saved settings will be lost
   as well.)

3. Is the iSRD function not available on B/W film?
   ESD can be used with conventional color negatives (developed using the C41 process), color slides (developed using the E6 process), and paper proofs. Due to the silver content in conventional black and white negatives and slides, these can’t be retouched using iSRD.

Technical Support

USA/CA
+1 714-670-7713
9 am to 5:30 pm, Pacific Time, Monday through Friday
For detailed information, please visit the product website.
United Kingdom
0125-674-1513
9 am-16pm, Monday through Friday
For detailed information, please visit the product website.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>