HIRALIY HN01 Automatic Drip Irrigation Kits with Garden Timer User Manual

HIRALIY HN01 Automatic Drip Irrigation Kits with Garden Timer User Manual

IMPORTANT !

PLEASE READ !

1. ONLY USE WITH CLEAN COLD WATER.
2. MAKE SURE THE SILICONE GASKET IS PLACED HORIZONTALLY IN THE TOP CONNECTOR BEFORE INSTALLATION TO PREVENT LEAKAGE.
3. WHEN EXPECTING FREEZING TEMPERATURES .TIMERS SHOULD BE REMOVED FROM THE HOSE FAUCET AND STORED INDOORS TO AVOID POTENTIAL FREEZE DAMAGE.
4. DO NOT INSTALL THE TIMER WITH TOOLS. HAND TIGHTEN ONLY. USE OF TOOLS MAY DAMAGE THE TIMER.
5. FOR ANY PROBLEMS DURING USE. PLEASE CONTACT US THROUGH AMAZON.

PRODUCT OVERVIEW

DIAL : Turn the dial to customize your watering schedule.
OK Button : Conform the settings or next step.
Button : Adjust time and system setup or delay watering program.
Button : Adjust time and system setup or child lock.
Plan/Manual Watering Button : Switch between P1 P2 and P3. In AUTO click to set up manual watering.

• Battery Indicator

• Watering

• Child Lock

• Rain delay

Screen content| SU-SA| Used to set the day of the week for watering and to display the current day of the week
---|---|---
P1/P2/P3| Three watering schedules can be set up
NOW| Indicates the current time
NEXT| The next watering time
Every| Intervals between watering cycles（cycle by week/cycle by day）
Dial content| SET CLOCK| Set current time
START TIME| Set the time of start watering
HOW LONG| Set watering duration (1 minute to 23 hours 59 minutes)
HOW OFTEN| Set watering frequency ( 1 minute to 7days )
AUTO| Automatically run watering schedules
OFF| Turning o¦ the watering timer
ITEMS| SPECIFICATIONS
---|---
Water Duration| OFF、00H01M~23H59M
Watering Frequency| Sunday to Saturday/2 days to  6  days
Working Pressure| 0. 5-8bar ( 7. 2psi – 116psi )
Max  Flow  Rate| 9.24GPM
Thread| For taps with  NH 3/4″
Working Temperature| 4. 5 ℃-45 ℃（ 40. 1℉-113 ℉）
Batery Power| 2  x AA  Alkaline  bateries
Batery Life| Approx  1 year

PRODUCT INSTALLATION

Installing the Batteries

1. Remove the battery cover on back of the timer
2. Install 2 new AA (1.5V) alkaline batteries (not included)
3. Firmly reinstall the cover back into the timer

NOTE:
Please secure the battery cover to ensure the waterproofs of the battery compartment.

Please remove the battery to avoid damage to the timer if it is not used for a long time or before winter comes.

When the low battery indicator light on the display is on, please replace the battery in time.

Please do not install rechargeable batteries to avoid low voltage.

The calculator has a power failure memory function. After power failure and battery re installation, you don’t need to re- set the watering schedule, you just need to set the current time.

PROGRAM SETTINGS

SET CLOCK

1. Turn dial to SET CLOCK

2. Set Current Day: Press the to set current day of the week, the “Day” flashes when it is being selected. Press and [] will present on the selected “Day”.
   TIPS: “[]” will flash between SU and SA if OK has not been pressed to confirm.

3. Set Current Time: Press the to set current hour and minutes, press to confirm.

4. Turn dial to START TIME to save setting.

TIPS:
Hold the button can change the time quickly. At the end of setting, please turn dial to save changes. II you press at the end, it will go back to the previous step.

SET START TIME

1. Turn dial to START TIME
2. Press PLAN/MANUAL to switch between P1 , P2 and P3.
3. Press to set the hour of start time, press  to confirm.
4. When “minutes” flash, press to set the minutes of star time，press to confirm.
5. Turn dial to HOW LONG to save setting.

TIPS:
At the end o f setting, please turn dial t o save changes.
If you press a t the end,it will g o back t o the previous step.

SET HOW LONG

1. Turn dial to HOW LONG
2. Press (PLAN/MANUAL to switch between P1, P2 and P3.
3. Press to change OFF to 00H0IM, press to change to 00H59M. Press to set the hour of Watering time, press to confirm. When “minutes” flash, press to set the minutes of Watering time.
4. Press to switch between “hour” and “minute” settings.

TIPS:
At the end of setting, please turn dial to save changes. If you press at the end, it will go back to the previous step.

TIPS:

1. The duration of “HOW LONG” can be set as: OFF，1 minute ~ 23 hours 59 minutes.
   

2. When “minutes” flash, press to change 00:01 to OFF. When  “hours” flash and 01:00 displays, press to change t o OFF.
   

3. When OFF displays, this watering setting will not be executed.
   

**SET HOW OFTEN

**

1. Turn dial to HOW OFTEN.
   (The default display is SU-SA, “PLAN” will not work）

2. Set watering frequency: there are 2 modes of watering frequency.

3. ①We e kday Mo de: Press to s e le ct watering day of the week, “Day” will flash if it has not been selected. Press to confirm, the “Day”will keep flashing and means the “Day” has been selected.
   Press again can cancel the selection.

4. Turn dial to AUTO to save setting.

TIPS:
At the end of setting, please turn dial to save changes. If you press at the end, it will go back to the previous step.

AUTO

1. Turn dial to AUTO, the watering plan will b e automatically executed, with the screen turning o aer 2 minutes.
2. The screen will display the current time and the next time when the valve opens, cycling every 3 seconds.

Note : When the watering time for P1/P2/P3 overlaps, execution will follow the timeline, with the earliest watering time taking priority. If watering is interrupted by the next watering plan, the previous watering will b e paused and the next one will be executed.

OFF MODE

1. If you wish to stop the watering plan for an extended period , turn the dial to OFF . ( Your settings are saved)
2. The timer will not water automatically while in OFF mode ( The screen will display the word OFF in large letters ) .
3. To start watering automatically again , turn the dial back to AUTO to resume your programmed watering schedule .
   

ADDITIONAL FEATURES

RAIN DELAY WATERING

When you know rain i s coming, the Rain Delay feature allows you t o skip future rain days and does not interrupt your future watering schedule.

To enable the Rain Delay feature, perform the following steps .

1. When the dial at the ” AUTO ” position, press the button for 3-5s to enter the rain delay mode.

2. The screen will display 1 days by default, press the or button t o select 1 days to 7 days for rain delay setting.
   RAIN DELAY WATERING

3. Press button to run the delay function aer selecting the delay time, and all the watering plans will skip in this period.

4. To quit rain delay mode, please hold the button again for 3-5s t o resume your programmed watering schedule.
   Note : Please remember t o press the button aer selecting the delay time other wise the delay mode will exit automatically aer the reading flashes for about 2-5s.

**MANUAL WATERING

** This feature allows you to water without interrupting your set watering schedule. To access this feature, please follow the steps b e l o w

1. Keep the dial at the “AUTO” position, click PLAN/MANUAL button t o enter manual watering mode.

2. The default duration o f manual watering i s 1 minute, you can press or button t o set the manual watering time from 1 minute t o 2 3 hours 5 9 minutes and hours.
   MANUAL / HAND WATERING

3. Aer setting the watering time, then press button t o run the manual watering function.

4. To stop manual watering, turn the dial t o “OFF” and then back t o “AUTO” o r press the PLAN/MANUAL button to resume the watering schedule you set.

CHILDREN LOCK

Make sure the timer dial is at the ” AUTO ” position. Press and hold the button for 5 seconds until ” ” appears on the screen. If you want to cancel the child lock setting, please press and hold again for 5s.

BATTERY STATUS

• Full

• Low Power

Note :

• When low battery indication appears on the display, the valve will automatically close to avoid leakage. Please replace the battery in time to keep the normal operation.

TROUBLESHOOTING

1. No silicone gasket installed
2. The faucet i s not the standard” 3 / 4″

|

1. Add silicone gasket
2. Make sure the faucet is a “3 / 4” faucet.
3. Strengthen it with raw rubber wrap.

The water won’t stop / blowout|

1. Long time in storage and trans- importation make the valve inactive.
2. Valve blockage

| Step-1 .Keep the tap turned o¦ and turn  the  timer dial to Auto
Step-2 . Run the manual watering function or 5-sand stop it ( refer to page 19).
Step-3 .Repeat the Step 2 for 3 to 5 times.Step-4 .Try to use it normally
No response for manual/rain delay fun cation|  Adler sting manual watering or rain delay time , without pressing OK button to save and run.|  Press OK button again after the time is set to confirm.Refer to 19-20 page
Short battery life|

1. Mixed use of old and  new batteries.
2. Used the  bicarbonates or recharge- able   batteries.

|

1. Use new  alkaline batteries
2. Rechargeable bandmaster carbon batteries haves short life,use the alkaline batteries  instead  of  them.

Low water- pressure|

1. Filter blockage.
2. Inlet pressure not sufficient to support watering needs.

|

1. Check if the filter is clogged,if so clean or replace the flyer.
2. Make sure the timer is installed properly and not cross-threaded.
3. Installation of a booster pump or other auxiliary equipment of increasing pressure.

If it doesn’t work and you want to re turn or replace it, please contact us through h Amazon for support.

WARNINGS

1. Intended for outdoor use only, put in the sheltered outdoor will prolong the the product lifetime.

2. Using tools to tighten timer too tight, easy to cause damage, to avoid damaging the timer, please tighten it with your hands instead of a tool.

3. Make sure the silicone gasket is placed horizontally in the top connector before installation to prevent leakage.

4. Mesh filter can prevent dirt particles and prolonge the life of the hose timer.Clean filter regularly and replace if worn.

5. When the power is low, please replace the batteries intime to avoid the interruption of the normal
   operation when replacing the batteries, please make sure the battery compartment is dry.

6. When not in use, remove batteries, drain and store indoors to keep away from freezing.

7. Do not use the timer when it’s more than 113F (45°C), or less than 40.1 F(4.5°C).

8. Do not subject the product to extreme force and. shock.

9. Never immerse the product in water. If water is sprayed into power source, it may cause severe electrical shock.

WARRANTY

We provides a 1-year worry-free warranty against manufacturing defects i n materials and workmanship from the date o f purchase.

During the warranty p e r i o d , We will replace the defective products found under reasonable use and service for free.

Please contact u s through Amazon ,and we will reply t o your questions within 2 4 hours .

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>