Imou Nvr1108hs Wireless Recorder User Guide
- June 15, 2024
- imou
Table of Contents
- Packing List
- Local Basic Operation
- Introduction
- Installation
- App Operation
- Connection
- FAQ
- Q: Why does the Device fail to boot up?
- Q: How to add a wireless IPC to a running Device?
- Q: Why are there no video records in local playback?
- Q: Why s the playback time inconsistent with actualtime after enabling
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Yimou Nvr1108hs Wireless Recorder User Guide
Packing List
In this document, the Device refers (o the wireless recorder.
-
Device!
-
Power Adapterx1
-
Mouse x t
-
Network Cablex1
-
Waterpower Cable!
-
SATA Data Cablex1
-
Screw Package
-
Rubber Feet Packagex1
-
apex
Local Basic Operation
Power On and Off
Booting up Connect monitor o the Device, and then plug in the power to boot up
the Device .
Shutdown :
Select Main Menu > SHUTDOWN to enter the SHUTDOWN interface, and then click
Shut down. Unplug the povier after the monitor s blark.
Do not force the Device to shut down (or unplug the power) when the interface is indicating Saving data or the Device is recording videos
Initialization
After turning on the Device for the first time, you need to initialize the
Device by
the following steps.
- Set parameters for the administrator (the default username is admin).
- Draw an unlock pattern for login.
- Configure the password protection parameters.
Be sure that the email address for resetting password is correct.
Startup Wizard
For the first time login, you can configure the Recorder quickly by Startup
Wizard, and set options such as general settings, Yimou cloud, network
settings and record settings.
Introduction
- HDD status indicator off: HDD is working properly
- HDD status indicator always on: HDD is working abnormally
- Network status indicator off. Network connection is normal
- Network status indicator always on Network connection is abnormal
- Power status indicator always on: Power connection is normal
Live View
After you logged in, the system goes to multiple-channel live view mode by
default. You can view the live video of each channel.
Playback
Select Main Menu > Search or right-click on the live view interface and select
Search.
You can play back records according to the configured record type, record time
and channel.
Installation
Step 1 Unscrew four fixing screws (1, 2, 3 and 4) of the cover and back them up.
Step 2 Remove the cover in the direction of the arrow as shown in the figure below.
Step 3 Connect HDD to the Device using data cable (a) and power cable (b).
Step 4 Turn over the Device, and align the HDD to the four holes of
bottom panel, and then fix the HDD with screws (5, 6, 7 and 8) in the screw
package.
Step 5 Put back and fix the cover with the four backup screws (1, 2, 3
and 4) in Step 1 to finish the installation
.
↑ Turn off the power before opening the cover to replace the HDD, otherwise it might cause damage to the HDD.
App Operation
Step 1 Scan the QR code below to install Imou Life App. Register and then log in to Imou Life App
. Skip Step 1 if you have completed the download and registration of Imou Life App in the Startup Wizard.
Step 2 Tap @ at the top comer of Device tab, an then scan the QR code or enter the serial number of the Device to add 1 Yimou Life.
Step 3 After adding the Device to Imou Life, you could perform operations
such as viewing live videos, viewing alarms, setting alarms and sharing the
Device.
Step 4 (Optional) You could share permissions of the Device or a single video channel to family members.
Connection
The Device supports wireless connection and wired connection. We recommend that you use wireless connection to connect wireless IPC and to use wired connection when signals are seriously interfered.
-
Wireless connection: Put a wireless IPC next to the Device and turn it on, and then turn on the Device. For details, see Local Basic Operations. The wireless IPC will automatically pair to the Device in 120 s..
Unplug the power cable of the wireless IPC and install it at a place as needed.
-
-Wired connection: Add the IPC to the Device according to the Startup Wizard when they are turned on.
FAQ
Q: Why does the Device fail to boot up?
After the Device is powered on, observe the power status indicator on the front panel. If the blue light is off, check the wiring. If the
Q: How to add a wireless IPC to a running Device?
A: Put the wireless IPC next to the Device and turn it on. Right-click the local GUI and select Wireless Pairing. After pairing is completed, install the wireless IPC at a place as needed.
Q: Why are there no video records in local playback?
A: Three possible reasons: 1. Wiring error. 2. HDD malfunction. 3. Record function is not enabled. Check method: 1. Check the HDD status indicator. If the light is on, the HDD is working abnormally. 2. Select STORAGE > Disk Check to run the diagnosis, replace the HDD if there are damages. 3. Right-click the local GUI and select Manual > Record to check if the record function is enabled.
Q: Why s the playback time inconsistent with actualtime after enabling
cloud storage?
A: Ensure that he IPC time is consistent with Device time. Select SYSTEM > GENERAL > General to enable IPC Time Sync. You can also select SYSTEM > GENERAL > Date Time to modify Device time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>