serenelife PUCWM200 Portable Washing Machine User Guide
- June 2, 2024
- serenelife
Table of Contents
Serene Life PUCWM200 Portable Washing Machine
Please take the time to read these instructions carefully before you begin using your Portable Washing Machine. Following the advice in this user guide will ensure you get the performance you expect from your machine and that you get the best possible wash results. Keep these instructions for future reference.
Product Description
Our single-tub washing machine adopts a plastic body, which has the advantages of never rusting or rotting, beautiful in shape, safe and reliable. The Portable Washing Machine has a large pulsator, and new water flow, and the clothes are not entangled.
Structure Diagram
Spin Function
- Drain out water in the washtub after washing. Attach the spin basket to the impeller fixed hole and rotate anticlockwise to fix.
- Transfer the clothes in the spin basket smoothly.
- Close the cover. Rotate the Spin Timer to the desired time setting – the spin tub starts rotating.
- Note : This function is just for underwear, shirts, etc., little clothes; Don’t open the cover when spinning.
Portable Washing Machine Installation
- Place the washing machine on a level surface near a drainage point. Avoid using the washing machine on uneven, inclined or unsteady ground which will cause vibration when working on one side.
- The packaging foam at the bottom of the washing machine must be removed, otherwise, it will affect the heat dissipation of the motor and affect the service life of the washing machine.
- When you connect the external drainage pipe by yourself, it is not advisable to connect it too long (not more than 2 meters), otherwise it will affect the drain water. The drain outlet should not be higher than the height of the washing machine base.
- The washing machine installation should be placed on a rm and level ground with a maximum allowable inclination angle of 2°. The washing machine should be placed more than 5cm away from the wall to prevent product noise during operation.
- The power socket must be wired according to regulations and should be reliably grounded.
- Put down the drain pipe, there may be a small amount of water owing out of the drain pipe when you start to use it.
- This is the residual water when the factory conducts the factory performance inspection, please don’t worry.
- Connect the water inlet pipe and insert the water inlet pipe into the water inlet of the washing machine.
Preparing your laundry
Follow the instructions given in the care labels on the clothing.
Before loading your laundry, make sure that you remove coins, keys, and other hard objects, and close zippers. These items may damage clothes.
Knot the tie, button it up, close the zips, and fasten any hooks and eyes.
To ensure good cleaning results, do not overload the tub, especially when washing heavily soiled loads. Sort laundry by fabric type, soil level, color, and load size as needed.
Reverse clothes with buttons to avoid the sound of the buttons hitting the walls of the tub.
How to do laundry
Disposal of Laundry
When washing clothes, it is best to wash in batches of different textured fabrics such as wool, velvet, nylon, and cotton to prevent the danger from sticking to each other and can be combined with the washing method and time to achieve the best washing effect.
Washing Operation
- Rotate the wash selection knob to the standard or gentle position.
- Determine the water level according to the number of clothes. The maximum water level H is marked on the left later plate. Please do not exceed the maximum water level.
- Put an appropriate amount of detergent into the washing tub according to the amount of laundry.
- Put the laundry in the washing machine tub.
- Select the washing water and washing time according to the type of laundry and the degree of soiling.
- After washing, rotate the washing selection knob to the Drain position to discharge the water.
- Pour in an appropriate amount of water (water should completely cover the clothes, and the water level should be higher than the clothes for about 3~5cm).
Rinse Operation
Pre-dehydration
After washing, put the laundry evenly into the spin tub, press down firmly and press the cover (as shown in the figure) to avoid vibration during spinning. Turn the spin timer to spin for 2-3 minutes. If you will use the washing tub directly to rinse, pour in the required water level for washing. Adjust the washing time to 4-5 minutes. For delicate fabrics, leave it on for about 2-3 minutes.
When rinsing, the number of rinses depends on the clarity of the washing liquid, usually 2 times. Drain the rinse water.
Washing tub rinse
Fill the washing tub with water according to the washing operation. Adjust the wash time to the 4-5 minute position, or about 2-3 minutes for delicate fabrics. Usually two rinses.
Compaction
- Press the garment firmly and close it with the press cover
- Even a small amount of clothing should be properly leveled and compacted. The press cover should be closed
How to use Spin Dry Function
- After washing is completed, put down the drain pipe and drain the water in the bucket.
- First, align the drain basket with the pulsator and place it on the pulsator. Rotate the spin basket counterclockwise to it into the groove of the pulsator.
- Put the clothes into the spin basket at, and press the press cover (to prevent the clothes from running out when draining), close the upper cover, set the program rotary switch to the draining position, turn the timer knob, and rotate according to the type of clothes. Set the selector knob to “DRAIN” and discharge the water. If the time setting is too long, or you want to stop in the middle, you can turn the timer knob counterclockwise to the of position, and the spin basket will stop rotating soon.
- Note : The clothes should be placed evenly and covered with a press cover to avoid the machine shaking due to uneven placement.
- When the draining time is up (draining is over), open the top cover, take out the press cover, and take out the clothes to dry. Rotate the drain basket clockwise and pull the spin basket firmly upwards.
- Please take out the spin basket when washing, please refer to the instruction manual for the washing method.
- The spin basket of the Washing Machine can’t completely dry the items. It can only save you the step of twisting the clothes and make the clothes no longer drip.
- The spin basket pin is used to fix the spin basket during transportation. Please unplug it while washing clothes. When spinning, insert 1pc or 2pc latches into the hole in the spin basket.
General Safety Warnings
Install your machine in a location that can be fully ventilated and preferably
has constant air circulation.
The distance between the pipeline and the ground should be smaller than 15cm,
in order to drain of water conveniently.
Keep out of the sunshine, otherwise, the color and form of plastic will
transform.
Store and install the washer where it will not be exposed to temperatures
below freezing or exposed to outdoor weather conditions. Failure to do so may
result in serious leak damage.
A separate, earthed power socket is required for the power supply. Do not
replace the plug by yourself.
Do not spray water on the control panel or switch of the washing machine. It
could cause or an electric shock.
Do not pour direct hot water higher than 50°C or 122°F into the laundry in the
washing machine (so as to prevent the product from being deformed due to high
temperature and heating, causing the whole machine to be defective).
Do not pull the power cord when unplugging the power plug. Unplug the power
plug by holding the plug. Failing to do so may result in electric shock or re.
If the power plug or power cord are damaged, contact your nearest service
center.
Do not add gasoline, dry-cleaning solvents, or other ammable or explosive
substances to the wash water. These substances give of vapors that could
ignite or explode.
Do not allow children to play on or in the appliance.
Close supervision of children is necessary when the appliance is used near
children.
To avoid plastic deformation, do not place heavy goods or hot objects on the
washing machine.
Clean the machine with a soft, damp cloth, then wipe dry. Use mild detergent
only if necessary.
Maintenance
Good maintenance work can ensure the performance and prolong the service life of the washing machine. Turn your mains power supply o and remove the plug from the socket before carrying out maintenance and cleaning of your machine.
Washing machine cleaning
- Please wipe the body frequently with a soft cloth.
- Wipe with a soft cloth dampened with neutral soapy water. Do not splash water directly on it, or wipe it with thinner, kerosene, volatile oil, and alcohol. If you use a special cleaner, follow the instructions.
Filter box cleaning
- Press the upper end of the letterbox by hand, take out the letterbox, and remove the internal garbage.
- When reinstalling the litter box, the lower end of the litter box with the empty groove of the washing tub, and then push it in firmly.
- After the litter box is installed, it can be washed.
What to do if water freezes
- Please remove the water inlet pipe after use and drain the remaining water in the pipe and tub.
- In winter, if there is left over water, it may freeze and malfunction may occur during operation. If it freezes, please do not operate it. Pour hot water of about 40°C into the bucket to submerge the impeller, wait for a while, and turn the impeller gently by hand to use it again.
Safety and General Precautions
Power Cable
- When the washing machine is not in use, it should be unplugged.
- The product should be placed in a well-ventilated place. DO NOT place in strong direct sunlight or dusty places.
- Keep the product away from heat sources, do not use hot water above 50°C or 122°F.
- If the supply cord is damaged, it must immediately be replaced by the manufacturer, its service agent or a qualified technician.
Clothes that cannot be washed
- Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol, dry cleaning detergent, or other ammable substances. This may result in electric shock, are, or an explosion.
- Do not mix chlorine bleach with ammonia or acids such as vinegar. Incorrect usage can produce poisonous gas, and result in serious injury.
Other safety matters
- During the spin-drying operation, do not put your hands into the tub. If the lid of the machine is opened, do not take clothes out until the spin-drying tub stops spinning to avoid electric shock, injury or re.
- Do not allow children to play on or in the washing machine. Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances.
- There are vents at the bottom of the washing machine, which must be well ventilated during use, and must not be blocked by foreign objects such as carpets and packaging bottom linings.
- Use the new water inlet tube that came with the washing machine, the old water inlet tube cannot be reused.
Troubleshooting
FAULT WARNINGS AND WHAT TO DO
Electrical Schematic Diagram
Features:
- Stainless Steel Inner Body
- Stainless Steel Spin Basket
- Semi-Automatic Cleaning Function
- High-Frequency Vibration to Eactively Remove Dirt
- Energy-saving and Environmental Protection
- Saves Water and Electricity
- Equipped with Heavy, Soft, Normal, Rapid, and Soak.
- 2 Programs and 1 Water Level
- Washing Program Customizer by Selecting Load Size, Adding Wash Time, and Spin Time
- Feature with Durable Rust-Resistant Steel Inner Tub, Water Inlet
What’s in the Box:
- Washing Machine
Technical Specs:
- Construction Material: Stainless Steel
- Item Weight : 15.98 Lbs.
- Rated Wash Power: 300W
- Frequency Response: 60Hz
- Voltage : 120V
- Waterproof: IPX4
- S/N Ratio : 60dB
- Timer : 0~15 mins
- Motor : Aluminum Motor
- Motor Speed : 840 RPM
- Product Dimensions (L x W x H): 14.6″ x 14.6″ x 24″ -inches
Questions? Comments?
We are here to help!
- Phone: (1) 718-535-1800
- Email: support@pyleusa.com
- www.SereneLifeHome.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>