AURA Double Row Grille Installation Guide

June 7, 2024
Aura

AURA Double Row Grille Installation Guide

AURA Double Row Grille Installation Guide

MAIN COMPONENTS

AURA Double Row Grille Installation Guide - MAIN
COMPONENTS

INSTALLATION

AURA Double Row Grille Installation Guide - locate the light
strips

STEP 1
Decide where to locate the light strips and ensure wiring has enough length for control box to be installed in desired location.

As shown below, connect all light pods to the control box with the included

AURA Double Row Grille Installation Guide - light pods to the control
box

Once connected, plug the control box Cigarette Power Adapter into an available 12 volt charging port.

AURA Double Row Grille Installation Guide - plug the control box Cigarette
Power Adapter

or, connect the positive wire to the fuse tap and connector the open negative wire to a ground (any metal surface). Then plug the fuse tap into the 10amp switched fuse.

AURA Double Row Grille Installation Guide - connect the positive
wire

WARNING: Please ensure that the led strips/control box/wiring all are mounted in areas of the engine bay that will not exceed 85C or 185F.

STEP 2

AURA Double Row Grille Installation Guide - Secure Control box in desired
location with Velcro or zaptiehs

Secure Control box in desired location with Velcro or zaptiehs.
* CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely hidden from exposing elements of moisture.

STEP 3

AURA Double Row Grille Installation Guide - Secure the light
strips

Secure the light strips using the zip ties to tie all the wiring away from the moving components.

* IMPORTANT: The LED connectors are not waterproof. You will need to use heat shrink tube (not included) or electrical tape around the LED connectors to ensure the longevity of the lighting kit.

STEP 4 Using the included E-Z Remote, select your desired color or pattern.

AURA Double Row Grille Installation Guide - Using the included E-Z
Remote

www.OPT-7.com

AUX WIRING FOR A DOME/DOOR LIGHT

NOTE: This feature activates white light only.
In order to activate Door Assist Sync, you need to connect the aux wiring of Aura control box to the positive and negative wiring of dome or door light.

OPTIONAL UPGRADE
Upgrade your Aura Original Control Box to the Aura Pro Bluetooth Control Box. All new AURA Pro Bluetooth is App enabled by a smartphone controller (iOS & Android Compatible).

AURA Double Row Grille Installation Guide - OPTIONAL
UPGRADE

DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.

NEED SUPPORT?
Scan for tutorial videos, troubleshooting tips, and more.http://qr.w69b.com/g/rh6fcCIM0

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals