iDiskk Bluetooth Wireless Earbuds User Manual
- June 7, 2024
- iDiskk
Table of Contents
iDiskk Bluetooth Wireless Earbuds
Charging Case (5000mAh battery)
Specifications:
- Battery Volume: 5000mAh
- Input power: DC 5V/2A
- Input port: TYPE-C
- Output power: 5V/1A
Notes: We do not recommend charging 2 devices simultaneously (wireless charge + wired charge) when there is only 2 (or less)
PP01 Wireless Earbuds
Thank you for purchasing iDiskk earbuds. Whether you are happy or
unhappy with our product, we love to hear from you. If any question,
please write us @iDiskk Customer Team
(tobysu@idiskk.com) We will make things right if
they are not.
Bluetooth connection:
Primary connection:
- Open the case
- Both earbuds start to pair with each other ( lights flash Blue)
- Pairing succeeds (the light of right earbud flashes Blue and red)
- Take the both earbuds out of the charging case
- Switch on Bluetooth function on your device and select “Airbuds” to connect.
Note: There may be two “Airbuds” are discovered by your device, it is normal as they represent two earbuds.
Subsequent Connection
1.Simply take Left, right or both eaburds out of the Charging case. It (they) will connect with your device automatically (ensure Bluetooth function of your device to be switched on).
In case that only one earbud has sound,please place the both earbuds back into the charging case and close it. Then take them out again.
Earbuds functions
Multifunction Button (long press for 5s to restart earbuds)
Earbuds charging
To fully enjoy all the features, please charge your PP01 earbuds when you
receive them. The charge at the factory was only for quality testing and will
have been reduced after the trip to you. To charge your PP01 earbuds, simply
connect a Type-C cable to the charge port of the PP01 charging case. This case
has a built-in battery that will charge your PP01 earbuds when you are not
near an electrical outlet.
Charging Case LED Indicator light
| Charge for Charging case | Flash |
|---|---|
| Charge for Earbuds | Steady on |
| Low battery notice | Flash and then off |
| Full Charged | 4 lights on |
Function of earbuds indicator light:
| Turn on | Blue light flash |
|---|
Turn off
| Red light on (about 1s )and then disappear
Pairing| Blue and Red flash
Successful connection with device| No light
Disconnection with device| Blue light flash
Low battery reminder| Red light flash (each 5 second)
Charging| Red light on
To preserve battery life span, fully charged at least once every 30 days or
more often if you use the PP01 a lot.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>