YETI 2011 ARC Cycle Owner’s Manual
- June 7, 2024
- YETI
Table of Contents
YETI CYCLES
600 CORPORATE CIRCLE, UNITD
GOLDEN, CO 80401
888.576.9384
USA
Overview
Congratulations on your purchase of a new Yeti bicycle. We are confident your new bicycle will exceed your expectations for value, performance and ride quality. Each frameset and component has been custom specified and designed to enhance your riding experience. Whether you are a beginner cyclist or a seasoned-pro, Yeti bicycles will provide endless hours of two-wheeled fun.
General information
This model-specific manual is designed to be used in conjunction with the
general Yeti Owner’s Manual and the manuals supplied by the suspension
manufacturers. If you did not receive the Yeti Owner’s Manual or the manual
provided by the suspension manufacturer, download the materials off the
Internet, or contact you dealer.
Bicycling can be a hazardous activity even under the best of circumstances.
Proper maintenance of your bicycle is your responsibility and when done
properly helps reduce the risk of injury and damage to your bicycle. This
manual outlines basic setup and maintenance recommendations of your new Yeti.
Because it is impossible to anticipate every situation or condition that may
occur during the assembly, setup and maintenance of your bicycle, Yeti
recommends that all service and repairs be This manual contains many
“Warnings” and “Cautions” concerning the consequences of failure to maintain
or inspect your bicycle. The combination of the safety alert symbol and the
word “Warning” indicates a potentially hazardous situation in which, if not
avoided, could result in serious injury or death. The combination of the
safety alert symbol and the word “Caution” indicates a potentially hazardous
situation in which, if not avoided, may result in minor injuries or damage to
your bicycle or a component of your bicycle. Be sure to read and understand
all “Warnings” and “Cautions”.
Warning: Make sure you review and understand the warnings, instructions
and content of this manual and accompanying manuals for your
bicycle.
Warning: Technological advances have made bicycles and bicycle components more complex and the pace of innovation is increasing. It is impossible for this manual or accompanying manuals to provide all the information required to properly repair and maintain your bicycle. In order to help minimize the changes of injury, it is critical for you to have work performed by an authorized Yeti dealer.
Frame Features
-
PURE TUBING
Yeti pure tubing is custom butted and tapered 7005 aluminum. This makes the frame lightweight and strong without the use of gussets. Unique shape provides added strength at the head tube junctions. -
BOTTOM BRACKET
73mm shell, for use with a 113mm spindle -
LOOPSTAYS
Circular loops stays provide a singular loop for the rear triangle providing added stiffness and a sleek aesthetics. Accommodates a 2.35’’ tire. -
TOPTUBE
Ergonomic top tube allows for easy shouldering for cyclo-cross riding.
Geometry
100 mm fork| | | |
---|---|---|---|---
| XS| S| M| L
A| 15.5| 17.5| 19| 20.5
B| 21| 22.4| 23.4| 24.4
C| 71| 71| 71| 71
D| 73| 73| 73| 73
E| 16.9| 16.9| 16.9| 16.9
F| 40| 41.2| 42.2| 43.2
G| 11.5| 11.5| 11.5| 11.5
H| 27.5| 29.4| 30.2| 31.4
I| 4| 4| 4.5| 5.25
J| 18.5| 18.5| 18.5| 18.5
K| 1.5| 1.5| 1.5| 1.5
Maintenance
Maintenance? Not sure how to work on your own bike? Contact your authorized Yeti dealer or ****visit www.parktool.com and check out the repair help section. This section contains detailed instruction on many of the service items listed in the maintenance schedule.
Maintenance Following these guidelines will help maintain the performance of your bicycle and prevent more serious problems from arising. It is important to remember that service intervals can vary depending on climate, trail conditions, and riding frequency.
ACTION
| WEEKLY| MONTHLY| 3 MONTHS| ANNUALLY
---|---|---|---|---
Clean and lube chain
| X| | |
Check tire pressure| X| | |
Clean bike of mud and debris (never spray water directly into frame or components)
| X| | |
Check brake function| X| | |
Check shock pressure, if applicable| X| | |
Check for loose bolts and tighten, if necessary| X| | |
Check headset and tighten / loosen, if necessary| | X| |
Thoroughly clean pivot points with a rag (do not lubricate)| | X| |
Replace brake pads, if necessary| | | X|
Check tires for wear| | | X|
Check spoke tension and retention, if necessary| | | X|
Check chain for worn, damaged, or loose links, replace chain if necessary| | |
X|
Complete tune-up performed by an authorized Yeti dealer| | | | X
| | | |
Torque We have attached a brief list of torque specifications for bolts and components that may need to be tightened while performing basic maintenance. This is just a guide. For specific torque specifications, please contact the component manufacturer directly.
Torque Specs|
---|---
Pivot Bolts| 125 -150
Derailleur Hanger Bolts| 30 -45
Handlebar Binder Bolt| 150 -180
Stem Binder Bolt| 175 -260
Seatpost Binder Bolt| 150 -180
Saddle Clamp Bolts| 175 -250
Rear Derailleur| 70 -86
Front Derailleur Clamp| 45 -60
Chainring Bolts|
88-132
Caution: The torque specifications listed should be used as a guide when performing maintenance. Technological advances have made bicycles and bicycle components more complex, and the pace of innovation is increasing. Because of these advances, Yeti recommends that you refer to the torque specifications of the manufacture’s component you are adjusting. In order to help minimize the chances of injury, do not perform any maintenance that you are not confident can be completed within your abilities.
HOUSING END CAPS
Yeti recommends using metal end caps to maintain the integrity of the
housing. The metal caps do not allow the cable to pull through as do the
plastic versions. Do not mix up the shift and brake housing because it will
result in a loss in performance.
Cable Setup
Caution: The failure to properly route shifter housing can cause malfunction of the shift mechanism and unexpected shifting of gears.
-
REAR DERAILLEUR
Take a piece of shifter cable and fit it from the rear shifter across the head tube into the outermost cable stop. -
FRONT DERAILLEUR The second piece of rear derailleur housing runs under the top tube from the outermost cable stop, across the seat tube and over the drive side seat stay, The third and final piece of shift housing runs in a conventional manner from the cable stop on the seat stay to the rear derailleur.
-
REAR BRAKE The rear brake loops across the head tube and fits into the middle cable stop on the underside of the down tube. The rear brake line follows the underside of the top tube then connects to the open cable stop on the bottom of the seat stay. The line then crosses to the inside of the seat stay and down to the caliper body.
Warranty
YETI LIMITED (2) TWO YEAR FRAME WARRANTY (applies to 303 DH, 303 RDH,
25TH 303 DH, AS-R 7 > 160MM Fork, DH-9, AS-X, 4X, DJ, SX)
Yeti Cycles will repair or replace, at its option, any frame it determines to
be defective materials and / or workmanship. The (2) two year limited warranty
is conditioned upon the bicycle being ridden under normal conditions and
having been properly maintained. This warranty does not apply to the
components attached to the frameset such as suspension components, wheels,
drive train, brakes, seatpost, handlebar and stem. This warranty applies only
to the original owner and is non-transferable. This warranty is void if the
bicycle was not properly assembled by an authorized Yeti dealer.
YETI LIMITED (5) FIVE YEAR FRAME WARRANTY (applies to AS-R 5 Carbon, AS-R
5 Alloy, AS-R Carbon, AS-R Alloy, AS-R-sl(c), AS-R, AS-R 7 w/160MM Fork, 575,
ARC, ARC-X, Big Top 29’R, FRO, Kokopelli)
Yeti Cycles will repair or replace, at its option, any frame it determines to
be defective materials and / or workmanship. The (5) five year limited
warranty is conditioned upon the bicycle being ridden under normal conditions
and having been properly maintained. This warranty does not apply to the
components attached to the frameset such as suspension components, wheels,
drive train, brakes, seatpost, handlebar and stem. This warranty applies only
to the original owner and is non-transferable. This warranty is void if the
bicycle was not properly assembled by an authorized Yeti dealer.
ADDITIONAL CONDITIONS
These limited warranties do not apply to normal wear and tear, nor to claimed defects, malfunction or failures that result from abuse, neglect, improper assembly, improper maintenance, alteration, collision, crash or misuse. The original owner shall pay all labor charges connected with the repair or removal of all components. Under no circumstances does this limited warranty include of the cost of travel or shipment to and from an authorized Yeti dealer. In order to exercise your rights under these limited warranties, the bicycle or frameset must be presented to an authorized Yeti dealer, together with proof of purchase.
- The above warranties have been in effect since January 2000. All Yeti frames sold prior to that date had a limited (1) one year warranty on the frameset.
- No Fault Replacement Policy
- Yeti Cycles will make replacement parts available at a minimum charge to the original owner in the event of a crash or any other non-warranty situation. Yeti Cycles does this at its sole discretion and reserves the right to refuse this offer.
- If you have a warranty concern, please contact your authorized Yeti dealer.
NO FAULT REPLACEMENT POLICY
Yeti Cycles will make replacement parts available at a minimum charge to the
original owner in the event of a crash or any other non-warranty situation.
Yeti Cycles does this at its sole discretion and reserve the right to refuse
this offer. If you have a warranty concern, please contact you authorized Yeti
dealer.
PRODUCT LIFE CYCLE
Every Yeti frameset has a useful product life cycle. The length of that useful
product life cycle will vary depending on the construction and materials of
the frameset, maintenance and care the frameset receives, and the amount and
type of use the frameset is subjected to over its life. Yeti recommends that
an authorized Yeti dealer should inspect the frame for stress annually. Frame
stress could cause potential failure and the signs are usually apparent in the
form of cracks, fracture lines, deformation, dents and other visual indicators
of abnormality. These safety checks for frame stress are important to prevent
accidents, injury to the cyclist and product failure of a Yeti frameset.
DISCLAIMER
Yeti Cycles is not responsible for any damages to you or others arising from
riding, transporting or other use of your bicycle. In the event that your
frame breaks or malfunctions, Yeti Cycles shall have no liability or
obligation beyond the repair or replacement of your frame pursuant to the
terms outline in this warranty.
CONTACT INFO
Yeti Cycles
600 Corporate Circle, Unit D
Golden, CO 80401
(p) 303-278-6909
(f) 303-278-6906
www.yeticycles.com
BUSINESS HOURS
Monday-Friday
8AM-11:30AM, 1:00PM-5:30PM
(Mountain Time)