ECOFLOW EFDELTA User Guide
- June 7, 2024
- ECOFLOW
Table of Contents
EFDELTA
User Guide
SOLAR CHARGE
X-STREAM CHARGE
OVERLOAD PROTECTION
20A Max
Contact us: support@ecoflow.com www.ecoflow.com
WARNING
1. Keep EF DELTA and the accessories dry and do not expose them to high heat.
2. Never disassemble, puncture, shock, crash, or incinerate the product or
the accessories.
3. Recycle and dispose of EF DELTA in accordance with the local regulations.
4. Pay attention to safety when handling the EF DELTA. 5. People with
disabilities or children should use the machine
under the protection of the supervisor.
GLOSSARY
The following terms are used in this document to indicate various levels of
potential harm that may be caused by improper operation.
NOTICE
The instructions, if not properly followed, may result in property damage and
minor physical damage.
CAUTION
The instructions, if not properly followed, may result in property damage and
serious physical damage The instructions, if not properly followed, may result
in property damage and serious physical damage.
WARNING
The instructions, if not properly followed, may result in property damage,
major accident and serious injury.
WARNING
Read the ENTIRE user manual to be familiar with the features of this product
before operating. Failure to operate the product correctly may result in
damage to the product or personal property and cause serious injury. EcoFlow
will not assume any legal responsibility. DO NOT use the product with
incompatible components or alter the product in any way without following the
instructions provided by EcoFlow. Otherwise, you cannot get after-sales
service from EcoFlow under warranty condition. These Safety Guidelines include
instructions for safety, operation and maintenance. It is important to read
and follow all the instructions and warnings in the user manual before
assembly, setup or use the product.
PRODUCT SAFETY GUIDELINES
WARNING
Improper use may result in fire, property damage or personal injury. Make sure
to use the product according to the following safety rules and guidelines.
Product use:
1. Do not expose EF DELTA to any liquid. Keep the EF DELTA away from rain or
any liquid. Do not drop the EF DELTA into the water. If the battery in the EF
DELTA comes into contact with water, it may cause chemical decomposition of
the battery. This may cause the battery to catch fire or explode.
2. Never use NON- EcoFlow batteries. EcoFlow takes no responsibility for any
damage caused by nonEcoFlow batteries.
3. Never use or charge swollen, leaky, or damaged batteries. If your battery
is abnormal, contact EcoFlow support or a EcoFlow authorized dealer for
further assistance.
4. Never install or remove a battery from the RIVER/EF DELTA when it is
turned on. 5. DO NOT use the batteries in strong electrostatic or
electromagnetic environments. Otherwise, the
battery control board may malfunction and cause a serious accident during use.
6. Never disassemble or pierce the product in any way. Otherwise, it may
leak, catch on fire, or explode. 7. DO NOT use the product if it was involved
in a crash or a heavy bump. 8. If the product falls into the water during
use,take the product out immediately and put it in a safe and
open area. Keep a safe distance from it until it is completely dry. Never use
it again and dispose it properly as described in the Battery Disposal section
below. If the product catches fire, it is recommend ed to use fire
extinguishing equipment in the following order: water or water mist, sand,
fire blanket, dry powder, carbon dioxide fire extinguisher. 9. DO NOT put the
machine in a microwave oven or in a pressurized container. 10. Do Not allow
pins, wires or other metal pieces to insert to the device case, outlets or
controls. Metal
pieces may short circuit the product. 11. Avoid collision. DO NOT place heavy
objects on the machine. 12. If there is dirt on any plug or outlet surface,
use a dry cloth to clean it. Otherwise, it will cause abrasion
nand result in energy loss or inability to charge.
WARNING
Product Charging:
1. Always use EcoFlow approved charging cables. EcoFlow takes no
responsibility for any damage caused by using non-EcoFlow charging cable.
2. When charging, please place the product on the ground with no flammable or
combustible materials around. To prevent accidents, never leave the machine
unattended during charging.
3. DO NOT charge a product immediately after a long heavy load, because the
product’s temperature may be too high. DO NOT charge a product until it cools
down to room temperature. The product may be unable to charge out of the
temperature range -4ºF to 140ºF (-20 to 60°C). The ideal charging tempera ture
range is 71ºF to 82ºF(22°C to 28°C).
Product Storage and Transportation:
1. Keep the product out of the reach of children. If any children
accidentally swallow parts, please go to a doctor immediately.
2. If a low-battery warning appears, charge the battery before store it.
Otherwise, long-term storage may cause damage to the battery in the product.
Batteries in the product will enter hibernation mode if it is depleted and
stored for a long time. Recharge the product can bring the battery out of
hibernation.
3. DO NOT place the product near a heat source, such as a car in direct
sunlight, a fire source, or a heating stove. 4. Store the product in dry
environments. DO NOT place the product where it may contact with water. 5.
Make sure no small metal objects can fall on or around the product while in
storage. 6. Never transport a product with a battery power level higher than
30%.
Battery Disposal:
1. Dispose the product in specific recycling boxes only after a complete
discharge. Batteries are hazardous chemicals. Please strictly follow your
local regulations regarding the battery disposal and recycle.
2. Dispose of the product immediately if it cannot be powered on after over-
discharging.
Product Maintenance:
1. Never store the product in environments below -20°C or above 60°C. 2.
Battery life may be reduced if not used for a long time. 3. Fully charge and
discharge the battery at least once every 3 months to maintain battery health.
Travel Notice:
It is forbidden to carry lithium batteries and equipment with a capacity
greater than 160Wh on airplane due to the regulation; Do Not bring this
product on flights..
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired
operation.
WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTICE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on,the user is encouraged to try to correct the interference by one or more of
the following measures: 1. Orient or relocate the receiving antenna. 2.
Increase the separation between the equipment and receiver. 3. 4. Consult the
dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
CONTENTS
EF DELTA USE CARE AND SAFETY GUIDE
1
FEATURES of EF DELTA
2
LCD DISPLAY
4
SOLAR PANEL CONNECTION
8
ENTRY-LEVEL UPS AND SERIES MODE
9
TECHNICAL SPECIFICATIONS
11
HOW TO RECHARGE EF DELTA
12
FAQs
12
WHAT’S IN THE BOX
13
OPTIONAL
13
EF DELTA USE CARE AND SAFETY GUIDE
CONGRATULATIONS! You now own the best quality Portable Battery Generator in
the world. This pamphlet is short and is meant to help you. Please take some
time to read it before using the product.
NOTICE Please note: To turn ON/OFF EF DELTA, you need to PRESS & HOLD the
Power Button. To turn on the AC power outlet, you need to PRESS & HOLD the AC
Button after turning on EF DELTA. This is designed purposefully: it will save
the battery life, so that your EF DELTA’s power is available when you need it.
Battery Maintenance:
Get to know your EF DELTA. Follow this step-by-step introduction to each of EF
DELTA’s ports, buttons, display screens and more.
Technical Specifications:
Understanding the specs that make EF DELTA such a cutting-edge product.
How to Charge EF DELTA:
Everything you need to know about recharging your EF DELTA via AC Cable, car
charge cable or solar charge cable (If applicable).
FAQs:
Answers to you some of the most important questions about how to take care of
your EF DELTA, store your EF DELTA, and safely use your EF DELTA.
What’s in the Box:
What include in your EF DELTA purchase. If your purchase does not include
these items, please contact us at support@ecoflow.com.
1 power a free life
FEATURES OF EF DELTA
1 2
3 4
USB-A
FAST CHARGE
OUTPUT
DC ON/OFF
OUTPUT
ON/OFF
1. LCD Display
2. USB-A Output Ports
3. USB-C Output Port
5
4. DC ON/OFF Switch
(PRESS & HOLD to switch ON/OFF)
DC Output Indicator
6
5. Fast Charge USB-A Output Ports
6. Power ON/OFF Button
7. AC ON/OFF Switch
8
(PRESS & HOLD for ON/OFF)
AC Output Indicator Light
9
8. Ventilation Vents
9. 6 AC Output Sockets (100-120V)
7
Full Sine Wave
AC ON/OFF
4 AC Output Sockets(International
Version 220-240V)
10
CAR POWER
10. Car Outlet
Car Outlet Indicator
11
12
13
11. Solar Charge/Car Charge Input Port 12. X-STREAM AC Charging Input Port
13. Overload Protection Switch
220-240V Dedicated AC Output
EcoFlow has designed different AC Output sockets following the local regulations of different countries.
1. LCD Display
Displays the various conditions of the product. The screen will turn of after
5 mins. You can turn it on by pressing ON/OFF button.
2. USB-A Output Ports
Charge a wide array of devices such as your iPhone, tablet, GoPro, speakers,
or anything that needs to be charged through a USB-A Port. The USB-A Output
Indicator Light will automatically light up when a USB-A port is in use.
power a free life 2
3. USB-C Output Ports
Devices that charge through a USB-C port, such as a MacBook Pro, Android
phone, or other devices can be charged by the EF DELTA USB-C port. The USB-C
Output icon will appear on LCD Display when a USB port is in use.
4. DC ON/OFF Switch (PRESS & HOLD to switch ON/OFF) & DC Output Indicator
Press DC ON/OFF to turn on or off EF DELTA DC power. The DC ON/OFF button
controls the EF DELTA’s DC output. EF DELTA could not recognize when low-power
devices, such as earphone, is charging. So EF DELTA is designed to keep the DC
power on for 24 hours. The DC power will go off after 24 hours of not using
it. If you want to extend your standby time to 24 hours, turn the DC button
on.
5. Fast Charge USB-A Output Ports
The USB-A Output Indicator Light will automatically light up when a USB-A port
is in use. Fast charge-enabled devices can be charged at a maximum speed of
28W. If your device does not support fast charging, the device will charge in
regular speed.
6. Power ON/OFF Button
Press and hold the power button to turn EF DELTA on or off. When EF DELTA is
turned on the LCD Display Screen will light up. To turn ON/OFF LCD Display
Screen and keep EF DELTA working, press the Power Button. The Power Indicator
Light will automatically light up when EF DELTA senses any of the output ports
is in use. The Power Indicator Light will flash when none of EF DELTA’s output
ports is in use, meaning EF DELTA is in the Idle State. After 5 minutes’ in
the Idle State, EF DELTA’s screen will enter into the sleep mode( the battery
is still running). After 30 mins of not using in Idle State, EF DELTA will
automatically shut down to protect its batteries.
7. AC ON/OFF Switch (PRESS & HOLD for ON/OFF)
The AC power button controls the AC output of the EF DELTA. The AC power needs
to be turned on manually. To enable AC power, press the AC power button. When
AC power is not in use to charge a device, press the AC power button to turn
off the AC power. Make sure to unplug the power cord from the AC port. When
the AC power of the EF DELTA is enabled, the AC indicator will light up. If
the AC power is not used for more than 12 hours, he product will turn off
automatically. In addition, for users in selected countries, please press and
hold AC ON/OFF for 15s to switch between 50 and 60Hz.
8. Ventilation Fans
The fans prevent EF DELTA from overheating.
9. 6 AC Output Sockets (100-120V reigon) / 4 AC Output Sockets(International
Version 220-240V)
Charging devices that require 100-120V AC (230V for 220-240V edition) wall
chargers to be charged such as laptops, TVs, mini refrigerators, vacuums etc,.
10. Car Outlet & Car Outlet Indicator
Charging devices that need car ports to be charged, such as drone batteries.
The Car Outlet Indicator Light will automatically light up when the car port
is in use.
3 power a free life
11. Solar Charge/Car Charge Input Port
Supports a maximum of three 110W solar panels to be connected in series. Do
not put more than two solar panel for parallel connection. EF DELTA has a
limit input of 400W. Supports car charge with a maximum input of 10A.
12. X-STREAM AC Charging Input Port
Plug in an AC cable with a universal three-pin plug (one that can withstand an
effective current of 15A) into the port and connect the cable to an AC power
source. Please note that U.S. and Japan versions only support chargings in
100-120Vac (50/60Hz). International version supports 220-240Vac (50/60Hz) EF
DELTA’s X-STREAM system supports entry-level UPS function, user can use the EF
DELTA AC socket while the device is connected to a wall socket with AC power
supply (the AC power comes from the grid, not the battery). When the grid
loses power suddenly, the device can automatically switch to EF DELTA battery
power mode in <=30ms to ensure your work is not interrupted. This is an entry-
level grade UPS function that does not support 0ms switching. Do not connect
devices with high uninterrupted power supply requirements. Please perform
multiple tests to confirm compatibility before connecting devices, such as
data servers and workstations to EF DELTA. EcoFlow will not be responsible for
any loss of data or equipment damage caused by customers’ failure in following
the instruction.
13. Overload Protection Switch
When the input current continuously exceeds 20A during a charge, the AC
charging port will trigger the overload protection (the Overload Protection
Switch icon will automatically pop out). When the device is confirmed to be in
normal status, press the overload protection switch button to continue
charging.
LCD DISPLAY
i
j
a. Remaining Charge Time
The number indicates the remaining charge/discharge time (in minutes) for EF
DELTA.
power a free life 4
b. Battery Failure Warning
If the circle icon on EF DELTA’s display screen is flashing, please contact
our Product Experts at support@ecoflow.com.
c. Battery Level Indicator
Shows the percentage of the power. If it displays 0%, please charge EF DELTA
immediately.
d. High Temperature Indicator
When the temperature of the EF DELTA is too high, a high-temperature warning
icon appears on the screen to warn that the temperature of the product is too
high. Please cool down the product before use it again .
e. Low temperature indicator
A low-temperature warning icon appears on the screen to warn that the
temperature of the EF DELTA is too low. Please move the product to a warm
place and wait until it turns to working temperature before use it.
f. Fan indicator
The EF DELTA fan speed is intelligently controlled by the EF DELTA , and the
displayed speed is related to the fan speed.
g. Current Input
Shows the current input power of EF DELTA in watts.
h. Current Output
Shows the current output power of EF DELTA in watts.
i. Overload Warning
There are two types of overload protection. The first type protection: in the
DC area, when any port is powering devices that exceed maximum current limit,
or the output power of the AC jack exceeds the maximum AC power output
(Overload 1%-10% will work 3mins overload 11%-30% will work 1min; overload
31%-49% will work 1s; overload 50%-100% will work 100ms), and when the vehicle
power supply output exceeds the maximum current, the overload indication and
the corresponding interface indicator will flash simultaneously for 15
seconds. The output of the interface will be automatically shut down
immediately, and other ports will continue to work. Second type of protection:
When the power output from the DC or AC jack, and the vehicle power outlet
exceeds the battery maximum power output, the overload indicator and the
corresponding port indicator will flash simultaneously for 15 seconds. EF
DELTA will automatically shut down immediately. After an overload occurs,
remove the overloaded device first, and then restart EF DELTA to resume work.
j. Port Usage Indicators
Indicates the usage status of each port. In addition, press and hold the AC
ON/OFF button for 15s to switch from 50Hz to 60Hz, vice versa.
. Protection Information Instruction
The EF DELTA display screen uses different icons and combined icons to
indicate different protections for the product.
5 power a free life
USB-A Overload Protection
USB-C High Temperature Protection
USB-A and OVERLOAD icons flash together. Disconnect all electrical appliances
and wait 10 seconds before adding each appliance back.
USB-C and High-Temperature icons flash together. Let product cool before
connecting each appliance back.
Product Overload
Overload icon flashes.Unplug all the electrical devices and restart the product
High Temperature Discharge-protection
RECHARGING TIME, Exclamation and High-temperature icons flash together. This happens usually after a heavy battery use. Let EF DELTA cool down before recharging it.
High Temperature Recharge-protection
Exclamation and High-temperature icons flash together. The power supply can be resumed after battery is cooled down.
Low Temperature Recharging-protection
RECHARGING TIME, Exclamation and Low-temperature icons flash together. Place EF DELTA in a warmer place and wait for it back to its working temperature before recharging it.
Low Temperature Discharge-protection
Exclamation and Low-Temperature icons flash together. Place EF DELTA in a warmer place and wait for it back to its working temperature before recharging it.
Overload Recharging-protection
RECHARGING TIME, Exclamation and OVERLOAD icons flash together. Unplug Charging cables, restart EF DELTA and plug back in, If light keeps flashing contact support@ecoflow.com
Overload Discharging-protection
Exclamation and OVERLOAD icons flash together. Disconnect all appliances,
restart EF DELTA, and plug each appliance back in turn. Please note that
electrical appliances must be operated within rated power.
power a free life 6
Communication Failure between Main
Board and BMS
Battery Cells Failure
Only the Exclamation icon is flashing. Restart EF DELTA. If the light keeps
flashing, contact support@ecoflow.com
The Exclamation icon is on. Try to restart the device. If the light keeps
flashing, please contact our product specialists via support@ecoflow.com.
Communication Failure between Main Board and AC
AC icon flashes. Restart EF DELTA. If the icon keeps flashing, contact support@ecoflow.com.
Inverter Output Overload
AC and OVERLOAD icons flash together.Wait 10 seconds, turn AC Power ON/OFF. Please note that electrical appliances must be operated within rated power.
Inverter High Temperature Protection
Inverter Low Temperature Protection
AC and High-temperature icons flash together. Let EF DELTA cool down. Then
turn AC Power On/OFF the interface will automatically resume operation.
The AC and Low-Temperature icons flash together. Move EF DELTA to a warmer
place and wait for the inverter to warm up
Fan Blockage Car Charger Overload
AC and Fan icon flashes. Turn off EF DELTA and carefully clean and vacuum
around vents on both sides. Turn System Power On. If icon keeps flashing
contact support @ecoflow.com.
Car and OVERLOAD icons flash together. Restart EF DELTA, and make sure that
electrical appliances must be operated within rated power.
Car Charger High Temperature Protection
Car and High-temperature icons flash together. When temperature/XT60 Interface is recharging in a High Temperature. Wait for EF DELTA to cool down and it will automatically recover.
7 power a free life
Communication Failure between Main
Board and MPPT
Car icon flashes. Try to restart the device. If the icon keeps flashing, please contact our product specialists via support@ecoflow.com.
SOLAR PANEL CONNECTION
How to recharge the EF DELTA with solar panels?
If you need to know more about the connection of a single panel, please refer
to Solar Panel User Manual. Here we focus on demonstrate how serial connection
(up to three panels and the parallel connection of up to six panels). EF DELTA
supports 10-65V DC input. When the input exceeds 65V, EF DELTA overload
protection will be triggered. Voltage excessive may damage the product. Users
should follow all the instructions in the manual. EcoFlow do not provide free
repair services for any product damage caused by connecting many solar panels
to the product or incorrect connection, even during the warranty period.
1. Recommended serial connection method
a. Users can connect 1 to 3 pieces of solar panels (do not connect more than 3
in series) in series as shown in the figure below, to the MC4 port.
b. Then, connect to MC4 to XT60 conversion cable. c. Use XT60 conversion port
connect to the XT60 port on EF DELTA.
EF DELTA Charging Port
MC4 Connector
XT60 Connector
EF DELTA
SOLAR PANEL-21.6V X3
2. Serial and parallel connection (Professional solution)
Users can connect up to 2 sets of solar panels in parallel to the MC4 port as
shown in the figure. If you want to connect 6 solar panels, you can put them
into 2 sets of 3 solar panels connected in series and then connect the 2 sets
of solar panels in parallel. Connect them with our MC4 to XT60 conversion
cable and connect XT60 cable to the EF DELTA’s XT60 input to charge the
device. The parallel connection cable is an optional accessory needs to be
purchased separately.
power a free life 8
EF DELTA Charging Port XT60 Connector
EF DELTA
Solar MC4 parallel connection cable * Users have to buy the solar panels and
other
parallel connection accessories seperately.
SOLAR PANEL-21.6V X6
3. EF DELTA supports the use of third party solar panels (DIY solution)
Users can buy universal solar panels of MC4 connection standard on their own
to power EF DELTA, as long as the voltage and current (10-65V DC, 10A max)
comply with the specifications of EF DELTA, the panels will be able to
recharge EF DELTA through the MC4 to XT60 conversion cable. Note: EcoFlow do
not provide free repair services for any damage to the product caused by the
quality issue or improper operation of the third-party solar panels, even in
the warranty period.
ENTRY-LEVEL UPS AND SERIES MODE
Precautions when using EF DELTA UPS and series mode
When EF DELTA has UPS or series mode on, EF DELTA’s X-STREAM system supports
an entry-level UPS function. You can use the EF DELTA AC socket while the
device is connected to a wall socket with AC power supply (The AC power comes
from the grid, not the battery). When the grid suddenly loses power, the
device can automatically switch to EF DELTA battery power mode in <=30ms to
ensure your work is not interrupted. Series mode is a multi-level power series
solution developed based on the UPS function.
9 power a free life
It allows users to connect two EF DELTAs in series to get continuous power
that is two times more than a single machine. The principle of using it is
when the power of a EF DELTA is used up, the next machine can immediately
replace it to continue the power supply. This a entry-level UPS function that
does not support 0ms in switching power. Do not connect devices require high
continuing power supply. Otherwise, please run multiple tests to confirm it’s
compatibility before connecting devices, such as data servers and
workstations, with EF DELTA. EcoFlow do not take responsibility for any data
loss or equipment damage caused by customers’ failure in following the
instruction.
1.Entry-Level UPS user guide
Users can connect the EF DELTA AC charging cable to the power grid and connect
a electricity device to EF DELTA turn on the AC switch and automatically enter
the entry-level UPS mode. When the external power is cut off, battery will
immediately supplied power to protect your device.
AC ON/OFF
12V CAR
EF DELTA supports the entry-level UPS function with the switching time of less
than 30ms. In accordance with the UL 2743 standard, the AC output consist of a
double blade, ungrounded configuration. Hence, it is recommended to use the
UPS function of EF DELTA only for temporary emergency usage rather than for
long-term usage. DO NOT use electric appliances with bare metal when charging
to avoid the risk of electric leakage and electric shock. It is recommended
NOT to use the UPS function of EF DELTA for products such as databases,
servers, etc. If you want to use the UPS function for devices that is
sensitive to the switching time, please purchase a professional-grade UPS
system. Please note that EcoFlow is not responsible for any potential data
loss due to the use of UPS function.
2. Series mode user guide (Recommended for power users; all machines must be
fully charged)
Users can connect no more than 2 fully-charged EF DELTAs in series using the
AC charging cable to get continuous power and supply appliances with high
output requirements for up to 1.8 hours. In this mode, do not connect EF DELTA
to the power grid using an AC charging cable, or the overcurrent protection
(<20A) may be triggered. Connect EF DELTA to a home power grid and charge each
EF DELTA separately. We do not recommend you to charge more than two EF DELTA
at the same time. Otherwise, the excessive load may cause damage to the home
power grid. To use this function, you need to set one EF DELTA as the Master
and the others as Serve 1. Connect one AC cable to the AC output port of the
master unit and the other side to the input port of Serve 1. After connecting
the EF DELTA, turn all the AC switches on EF DELTA on to activate multi-
machine series mode. Finally, connect all the appliances to the AC sockets of
the Serve 1. Then you can charge your devices by using EF DELTA and enjoy the
benefits from extended powering time.
power a free life 10
Example:
AC ON/OFF
AC ON/OFF
12V CAR
100%
Master unit AC on
12V CAR
100%
Serve unit AC on
TECHNICAL SPECIFICATIONS
General Specs
Net Weight Dimension Capacity Testing and certification
30.9lbs (14kg) 15.7 x 8.3 x 10.6in (40 x 21 x 27cm) 1008Wh / 1260Wh c50.4V UL CE FCC RoHS PSE
Output
AC Output (x6)/AC Output (x4) USB-A Output (x2) USB-A Fast Charge (x2) USB-C
Output (x2) Car Power Output (x1)
1800W (Surge 3300W)total, 120Vac (60Hz)/230Vac (50Hz) 1600W (Surge
3100W)total, 120Vac ( 60Hz)/230Vac (50Hz)
5V DC, 2.4A, 12W Max, per port 5V DC, 9V DC, 12V DC, 2.4A, 28W Max, per port
5V DC, 9V DC, 15V DC, 20V DC, 3A, 60W Max, per port 108.8W, 13.6V DC, 8A max
Input
AC Charge Input Voltage AC Charge Input Power (Example 1) Solar Charge Input
Car Charger (Example 2)
Battery
Cell Chemistry Cell Type Discharge Temperature Charge Temperature Shelf Life
Life Span
11 power a free life
100-120Vac (50Hz/60Hz) ONLY! (International Version 220-240Vac ONLY!) X-STREAM
Charge 1200W max 400W 10-65V DC 10A max 12V/24V DC 10A max
Lithium-ion 18650 -4-140°F (-20-60°C) 32-113°F (0-45°C) 1 Year (After fully
charged) 800 Cycles (60%)
HOW TO RECHARGE EF DELTA
Example 1
AC cable
1200W Max X-STREAM Charge
<2 Hours
0-80% charged in 1 hour Full change in <2 hours
(Included)
Example 2 : We reommend you to start the car before connect car charger to EF DELTA.
XT60 Connector
Car Charger (120W Input)
<10 Hours
Charging 100% time required
(Included)
How do I recharge my EF DELTA?
EF DELTA has an AC charging port and a XT60 charging port located on the side
of EF DELTA. EF DELTA can be charged through AC power or solar panel. Besides,
you can also use solar panels connect in series (no more than three) and
connect the solar charge cable to the XT60 solar charging port of EF DELTA for
charging.
Can EF DELTA power my devices while it’s charging?
Yes, EF DELTA can be charging and outputing power in the same time. When you
are charging EF DELTA, we do not recommend connecting an electrical appliance
with a power over 800w for discharging, because the current capacity of the
wall outlet is limited.
FAQs
How do I care for EF DELTA?
EF DELTA is designed for various uses. If you need to clean EF DELTA, please
use a dry and non-abrasive cloth to clean the surface. You can use cleaners
designed for mobile phones or computer screeens can to clean EF DELTA, but do
not give it a bath!
power a free life 12
How do I store EF DELTA?
1. EcoFlow offers a water-resistant, dustproof case and we recommend you to
use it when you plan to store your EF DELTA for a long time.
2. Make sure to recharge EF DELTA to around 85%. 3. Put EF DELTA into the
case 4. Please store your EF DELTA in a dry environment without surrounded by
abrasive objects. For optimal
battery health, store EF DELTA in room temperature. 5. Discharge EF DELTA to
30%, then charge to 85% every 3 month. This can help prolong the battery life
and ensure your EF DELTA is ready to recharge the gears at all times. Without
any external sources for power supply during storage, EF DELTA has a shelf
life of over a year.
How do I use EF DELTA safely?
Please use EF DELTA in its operating temperature range. Using EF DELTA outside
of its optimal operating temperature range can push the machine beyond its
safe and effective limits. Do not submerge your EF DELTA in water. It is not
waterproofed and this will void your warranty. If you want to protect EF DELTA
against moisture and dust, use a EF DELTA protector (IP54). Do not block the
ventilation Fan while using EF DELTA.
WARNING
Do not charge the machine right after it is fully discharged (E.g. 1000W keep
40mins or 1500W keep 30 mins). For your safety, please wait 2 to 3 hours for
the product to cool down before charging it! If you attempt to charge EF DELTA
immediately after a full discharge, EF DELTA will display
as an overheating protection reminder. Please wait 2 to 3 hours for the
machine to be cooled down before recharging it.
WHAT’S IN THE BOX
EF DELTA
Solar Charge Cable (MC4 to XT60 Input)
13 power a free life
EF DELTA Bag
1.5m Car Charge Cable (Input)
1.5m AC Cable (Input)
User Manual & Warranty Card
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>