Panasonic NI-317T Automatic Dry Iron Instruction Manual

: June 3, 2024
: Panasonic

Table of Contents

Name of Parts
IMPORTANT SAFETY PRECAUTIONS
HOW TO USE
SELECTION OF TEMPERATURE
CAUTION
MAINTENANCE
SPECIFICATIONS
Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Panasonic NI-317T Automatic Dry Iron Instruction Manual

Name of Parts

Product Overview

Handle
Pilot Lamp
Fabric Guide
Dial Knob
Soleplate

IMPORTANT SAFETY PRECAUTIONS

Read all instructions carefully before using your electric iron.
This iron is recommended for household use only.
Before plugging, make sure that the input voltage is the same as the rated voltage marked on the iron.
Do not operate the iron with a damaged cord or the iron has been damaged or the main socket is loose.
Never disassemble, repair or modify this iron. For any repair work,request at an authorized Panasonic Service Shop.
To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.
Do not leave the iron unattended while it is connected to outlet. When leaving the room even for a short time, disconnect the power plug and put it on upright position. Keep the iron away from small children.
Never pull the cord directly to disconnect from outlet; instead grasp the plug firmly and pull to disconnect.
Don’t use the iron with the cord in tangled condition. The supply cord might be damaged soon.
If the supply cord is damaged, it must be replaced by our service agent or a similarly qualified person in order to avoid hazard.
To avoid a risk of electric shock, do not put the iron in water or any other liquid.
The iron should always be turned to MIN before plugging or unplugging from outlet.
Let the iron cool completely, before storing it. Loop cord loosely around the iron and put it on upright position when storing.
To avoid burning, never touch the hot metal parts of the iron.
The iron must be used and rested on a stable surface.
When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

HOW TO USE

Put the iron on upright position.
Set the temperature control dial to the MIN position.
Connect the plug into the outlet.
Set the temperature control dial to the desired position which is suitable to the type of fabric. Wait for approximately 2 minutes until the iron gets hot.

SELECTION OF TEMPERATURE

Sort the clothes according to the group of fabrics indicated on the temperature select control.
Check the label attached to the clothes and follow the manufacturer’s instructions.
First iron the clothes which require the lowest temperature. After that, iron those that require higher temperatures. This is because it takes more time for the iron to get cool than to get hot.
To avoid scorching or spoiling the cloth, pay attention to the fabric composition of the clothes.
In blended yarn fabrics, select the temperature suitable to the fabric resistant to the lowest temperature.
In case the fabric composition of the clothes is unknown, make trial ironing at a least conspicuous part of the clothes before regular ironing.
Try at lower temperature, and then gradually increase the temperature to find an ideal temperature for the material.

CAUTION

Avoid ironing on something hard such as zipper, metallic button, etc. in order not to damage the surface of the soleplate.

MAINTENANCE

After the ironing, cool the iron and then wipe it with a piece of soft cloth.
For any obstinate dirt, use a piece of soft cloth soaked with water, soap or neutral detergent.

CAUTION : Do not use any abrasive material.