ROSIERES Ovens Instructions

June 7, 2024
ROSIERES

ROSIERES Logo

PAPER TECHNICAL DATA SHEET

Parameter Value Tolerance Comment
Basis Weight 50 to 90 g/m2 +/- 4 g/m2 As specified by Customer
Bulk / Volume 1.6 / 16 to 2.3 / 23 As specified by Customer
Caliper 80 to 180 micron +/- 3 micron 180 micron maximum
Brightness 75 iso +/- 0.75
Shade 9 (Cream) +/- 0.5 As specified by customer
Opacity 84 to 94 +/- 1 Dependant on grammage/caliper
Moisture 8% +/- 0.5
Tear 275 to 450 Nm +1- 0.4
Tensile 2.75 to 4.50 kN/m +/- 0.4
Main furnish 85 to 90% mechanical groundwood Produced from Norwegian

Spruce
Secondary furnish| 10 to 15% Cellulose (Spruce)| | Purchased from Rottneros, Sweden
Wrapping| Kraft wrappers| | 2 layers
Cores| 76mm strawboard| | 152mm cores on request
Joins| Maimum 2 joins per reel| | Marked by red line on reel
Reel Diameter| 1000nun or 1150mm| | As specified by customer
Accreditation| FSC| Volume Credit| FSC Paper on request

ROSIERES Ovens - PRODUCTION RELEASED

Safety Indications
  •  During cooking, moisture may condense inside the oven cavity or on the glass of the door. This is a normal condition. To reduce this effect, wait 10-15 minutes after turning on the power before cutting food inside the oven. In any case, the condensation disappears when the oven reaches the cooking temperature.

  • Cook the vegetables in a container with a lid instead of an open tray.

  • Avoid leaving food inside the oven after cooking for more than 15/20 minutes.

  • WARNING: the appliance and accessible parts become hot during use. Be careful not to touch any hot parts.

  • WARNING: the accessible parts can become hot when the oven is in use. Children must be kept at a safe distance.

  • WARNING: Ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of electric shocks.

  • WARNING: Before initiating the automatic cleaning cycle:
    – Clean the oven door;
    – Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use detergents;
    – Remove all accessories and the sliding rack kit (where present);
    – Do not place tea towels

  •  In ovens with meat probes, it is necessary, before making the cleaning cycle, to close the hole with the nut provided. Always close the hole with the nut when the meat probe is not used.

  • Children under 8 must be kept at a safe distance from the appliance if not continuously supervised.

  • Children must not play with the appliance. The appliance can be used by those aged 8 or over and by those with limited physical, sensorial or mental capacities, without experience or knowledge of the product,  only if supervised or provided with instruction as to the operation of the appliance, in a safe way with awareness of the possible risks.

  • Cleaning and maintenance should not be carried out by unsupervised children.

  •  Do not use rough or abrasive materials or sharp metal scrapers to clean the oven door glasses, as they can scratch the surface and cause the glass to shatter.

  • The oven must be switched off before removing the removable parts and, after cleaning, reassemble them according to the instructions.

  • Only use the meat probe recommended for this oven

  • Do not use a steam cleaner for cleaning operations.

  • Connect a plug to the supply cable that is able to bear the voltage, current, and load indicated on the tag and having the earth contact. The socket must be suitable for the load indicated on the tag and must be having the earth contact connected and in operation. The earth conductor is yellow-green in color. This operation should be carried out by a suitably qualified professional. In case of ncompatibility between the socket and the appliance plug, ask a qualified electrician to substitute the socket with another suitable type. The plug and the socket must be conformed to the current forms of the installation country. Connection to the power source can also be made by placing an omnipolar breaker between the appliance and the power source that can bear the maximum connected load and that is in line with current legislation. The yellow-green earth cable should not be interrupted by the breaker. The socket or omnipolar breaker used for the connection should be easily accessible when the appliance is installed.

  • The disconnection may be achieved by having the plug accessible or by incorporating a switch in the fixed wiring in accordance with the wiring rules.

  • If the power cable is damaged, it must be substituted with a cable or special bundle available from the manufacturer or by contacting the customer service department.

  • The type of power cable must be H05V2V2-F.

  • Failure to comply with the above can compromise the safety of the appliance and invalidate the guarantee.

  • Any excess of spilled material should be removed before cleaning.

  • During the pyrolytic cleaning process, surfaces can heat up more than usual, children must therefore be kept at a safe distance. The appliance must not be installed behind a decorative door in order to avoid overheating.

  • When you place the shelf inside, make sure that the stop is directed upwards and in the back of the cavity. The shelf must be inserted completely into the cavity

  • WARNING: Do not line the oven walls with aluminum foil or single-use protection available from stores. Aluminum foil or any other protection, in direct contact with the hot enamel, risk melting and deteriorating the enamel of the insides.

  • WARNING: Never remove the oven door seal.

  • No additional operation/setting is required in order to operate the appliance at the rated frequencies.

General Instructions

We thank you for choosing one of our products. For the best results with your oven, you should read this manual carefully and retain it for future reference. Before installing the oven, take note of the serial number so that you can give it to the customer service staff if any repairs are required. Having removed the oven from its packaging, check that it has not been damaged during transportation. If you have doubts do not use the oven and refer to a qualified technician for advice. Keep all of the packaging material (plastic bags, polystyrene, nails) out of the reach of children. When the oven is switched n for the first time, strong-smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where the instructions contained in this document are not observed.
NOTE: the oven functions, properties, and accessories cited in this manual will vary, depending on the model you have purchased.

ROSIERES Ovens - General Instructions

Safety Indications
Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot be held responsible for any damage resulting from improper, incorrect or unreasonable usage. The use of any electrical appliance implies the observance of some fundamental rules:

  • do not pull on the power cable to disconnect the plug from the socket;
  • do not touch the appliance with wet or damp hands or feet;
  • in general, the use of adaptors, multiple sockets and extension cables is not recommended;
  • in case of malfunction and/or poor operation, switch off the appliance and do not tamper with it.

Electrical Safety
ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.
The power supply to which the oven is connected must conform with the laws in force in the country of
installation. The manufacturer accepts no responsibility for any damage caused by the failure to observe
these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a
disconnector with multiple poles, depending on the laws in force in the country of installation. The
electrical supply should be protected with suitable fuses and the cables used must have a transverse
section that can ensure correct supply to the oven.
CONNECTION
The oven is supplied with a power cable that should only be connected to an electrical supply with 220240 Vac 50 Hz power between the phases or between the phase and neutral. Before the oven is connected to the electrical supply, it is important to check:

  • power voltage indicated on the gauge;
  •  the setting of the disconnector.

The grounding wire connected to the oven’s earth terminal must be connected to the earth terminal of
the power supply.
WARNING
Before connecting the oven to the power supply, ask a qualified electrician to check the continuity of the power supply’s earth terminal. The manufacturer accepts no responsibility for any accidents or  there problems caused by failure to connect the oven to the earth terminal or by an earth connection that has defective continuity.

NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available so that the oven can be connected to this if it is removed from the space in which it is installed.  he the power cable must only be substituted by technical service staff or by technicians with equivalent qualifications.
Recommendations
After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean. Do not line the oven walls with aluminum foil or single-use protection available from stores. Aluminum foil or  any other protection, in direct contact with the hot enamel, risks melting and deteriorating the enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong smokey smells, we recommend not using the oven at very high temperature. It is better to extend the cooking time and lower the temperature a little. In addition to the accessories supplied with the ven,we advise you only use dishes and baking molds resistant to very high temperatures.
Installation
The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee.  The installation instructions for professionally qualified personnel must be followed. Incorrect installation may cause harm or injury to people, animals or belongings. The manufacturer cannot be held responsible for such harm or injury.
The oven can be located high in a column or under a worktop. Before fixing, you must ensure good ventilation in the open space to allow proper circulation of the fresh air required for cooling and protecting the internal parts. Make the openings specified on the last page according to the type of fitting.
Waste management and environmental protection
This appliance is labeled in accordance with European Directive 2012/19/EU regarding electric and electronic appliances (WEEE). The WEEE contains both polluting substances (that can have a  negative effect on the environment) and base elements (that can be reused). It is important that the WEEE undergo specific treatments to correctly remove and dispose of the pollutants and recover all  the materials. Individuals can play an important role in ensuring that the WEEE does not become an environmental problem; it is essential to follow a few basic rules:
– the WEEE should not be treated as domestic waste;
– the WEEE should be taken to dedicated collection areas managed by the town council or a registered company.
In many countries, domestic collections may be available for large WEEEs. When you buy a new appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as
long as the appliance is of an equivalent type and has the same functions as the purchased appliance.
SAVING AND RESPECTING THE ENVIRONMENT
Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently as possible, because heat from the cavity disperses every time it is opened. For significant energy saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and use the residual heat that the oven continues to generate. Keep the seals clean and in order, to void any heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the “delayed cooking” program makes energy saving more simple, moving the cooking process to start at the reduced tariff time slot.
Declaration of compliance
The parts of this appliance that may come into contact with foodstuffs comply with the provisions of EEC Directive 89/109.
By placing the mark on this product, we are confirming compliance to all relevant European safety, health, and environmental requirements that are applicable in legislation for this product.

Product Description

Overview

ROSIERES Ovens - Overview

1. Control panel
2. Shelf positions
(lateral wire grid if included)
3. Metal grill| 4. Drip pan
5. Fan (behind the steel plate)
6. Oven door
---|---

Accessories

  1. Metal grill

ROSIERES Ovens - Metal grill Holds baking trays and plates.

2.Drip pan
ROSIERES Ovens - Drip pan

Collects the residues that drip during the cooking
of foods on the grills.

3.Lateral wire grids
ROSIERES Ovens - Lateral wire grids

Lateral wire grid if included.

First Use
PRELIMINARY CLEANING
Clean the oven before using it for the first time. Wipe over external surfaces with a damp soft cloth. Wash all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering smells of newness.

Use of the Oven

Display description

ROSIERES Ovens - Display description

1. Timer/automatic mode
2. Fan function
3. Defrost mode
4. Temperature or clock display
5. LCD display adjustment controls
6. Function selector knob
7. Programme selector knob

WARNING!
The first operation to carry out after installation, or after a power cut, is to set the time of day (a power cut has occurred if the display is flashing 12:00).
200° -> The temperature LED “°” flashes until the displayed temperature is reached.
HOT -> When a program finishes, if the oven is still hot, the display shows “HOT”, alternating with the time, even if the knobs are positioned to OFF.

FUNCTION HOW TO ACTIVATE HOW TO DEACTIVATE WHAT IT DOES WHY IT IS NEEDED

SILENCE MODE

| • Rotate the left function selector to the position ” Silence mode “| • Rotate the function
selector to the position
OFF.| •Enables you to turn olf the sound of the minute minder.| • To turn off the sound of the
minute minder
SET THE TIME| • Rotate the left function selector to the position
“Set the time”.
• Use the buttons ” + ” or” – ” to set the time| • Rotate the function
selector to the position
OFF.| •Enables you to set the time which appears on the display| • To set the time
NB: Set the time when you
first, install your oven or just
after a blackout (the clock is
showing a pulsating 12.00)
COOKING
DURATION
[2]| • Turn the right function selector to a  cooking function
• Rotate the left function selector to the  position “Cooking  Time Duration”
• Set  the time of cooking
by using buttons ” + ” and ” – ”
• Lighting  Auto appears| •When the cooking time
has elapsed, the oven
switch off automatically
and the alarm rings for
few seconds To stop the
cooking functions early,
turn the function control
to OFF or set the time on
00.00; by rotating the
function selector to
Cooking Time Duration
and by using the buttons ”
+ ” and ” – “| • It allows to preset the
cooking time required for
the recipe chosen.
• When the cooking time is
set, turn the function
selector tough to go back
to actual time.
• To view the cooking time
selected, turn the left
function selector to
Cooking Time duration.| •For cooking the cles N recipes
END OF
COOKING
P•1Set the end time| • Turn the right function
selector to a cooking
function
• Rotate the left function
selector to the position
“End of cooking”
• Set the end time of
cooking by using buttons
” + ” and ” – ”
• Lighting Auto appears| • When the cooking time
has elapsed, the oven
switch off automatically.
• To stop the cooking
functions early, turn the
function control to OFF| • It allows to preset the end
of cooking time you want.
• When the cooking time is
set, turn the function
selector to OFF to go back
to actual time.
• To view the cooking time
selected, turn the left
function selector to End of
cooking Time| •This function is normally
used with the COOKING
DURATION function
•For example, the desired
food needs to cook for 45
•This function is normally
used with the COOKING
DURATION function
END OF
•For example, the desired
food needs to cook for 45
minutes and I want it to be
ready for 12.30; in this case: at
the end of the set time, the
oven automatically switches
off and an alarm sounds.
Select the desired cooking
function. Set the cooking
duration to 45 minutes (“-”
COOKING “+”). Set the end of cooking to 12:30 (“-” “+”).  Cooking will automatically begin at  11:45 (12:30 minus 45 minutes), at  the end of the set cooking time, the oven will automatically switch off.
WARNING: by setting only the
end of cooking time, and not the  cooking duration, the oven will  immediately switch on and switch  off at the end of the set cooking  time.
MINUTE
MINDER| • Turn the left function
selector to the position
Minute Minder.
• Set the time of cooking
by using buttons
“+”and “-”| • Set the time on 00.00 by
turning the left function
selector to the position
Minute Minder, and using
the button ” – “| •Emits an audible signal at
the end of a set time.
•During operation, the
display shows the
remaining time.| • Allow using the oven as
alarm even if the oven is
switch off
CHILD SAFETY
LOCK| • Turn the left function
a selector to the position
Child lock.
• Press the button ” + ”
during 5 seconds
• Child lock is available
when ” STOP ” appears
on display| • Turn back the left
function selector to Child
lock and press button ” +
” during 5 seconds.
• Indication STOP
disappears.| •The own cannot be used.| •This function Is useful when there are children in the house.

Cooking Modes

Function| T ‘C
default| T ‘C
range| Function
---|---|---|---
| | | LAMP: Turns on the oven light.

| 40| 4040| DEFROST: When the dial is set to this position. The fan circulates air at room temperature around the frozen food so that it defrosts in a few minutes without the protein content of the food being changed or altered.

MULTI-LEVEL

| 180
210| 50 =240
50 + 240| MULTI-LEVEL: We recommend you use this method for poultry, pastries, fish and vegetables. Heat penetrates into the food better and both the cooking and preheating limes are reduced. You can cook different foods at the same time with or without the same preparation in one or more positions. This cooking method gives even heat distribution and the smells are not mixed.
Allow about ten minutes extra when cooking foods at the same time.

| 200| 150 + 22C| GRILL+ FAN:use the turbo-grill with the door closed.
The top heating element is used with the fan circulating the air inside the oven. Preheating is necessary for red meats but not for white meats. Ideal for cooking thick food items, whole pieces such as roast pork, poultry, etc. Place the food to be grilled directly on the shelf centrally, at the middle level. Slide the drip tray under the shelf to collect the juices. Make sure that the food is not too close to the grill. Turn the food over halfway through cooking.

| 210| 50 +230| BOTTOM HEATING + FAN: The bottom heating element is used with the fan circulating the air inside the oven. This method is ideal for juicy fruit flans, tarts. quiches and pate.
It prevents food from drying and encourages rising in cakes, bread dough and other bottom-cooked food.
Place the shelf in the bottom position.

| 220| 50 +280| CONVECTION: Both top and bottom heating elements are used. Preheat the oven for about ten minutes. This method is ideal for all traditional roasting and baking. For seizing red meats, roast beef, leg of lamb, game, bread, foil-wrapped food (pa pilots), flaky pastry. Place the food and its dish on a shelf in mid position.

GRILL

| L3| L1+15| GRILL (Depends on the oven model): use the grill with the door closed.
The lop healing element is used alone and you can adjust the temperature. Five minutes of preheating is required to get the elements red-hot. Success is guaranteed for grills. kebabs and gratin dishes. White meats should be put at a distance from the grill; the cooking time is longer, but the meat will be tastier. You can put red meats and fish fillets on the shelf with the drip tray underneath. The oven has two grill positions:
G rill: 2140 W Barbecue: 3340W

PIZZA

| 220| 50 + mAx| PIZZA: This function with hot air circulating in the oven ensure a perfect result for dishes such as pizza or focaccia.

Maintenance Oven cleaning and maintenance
General notes on cleaning
The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before carrying out manual cleaning operations. Never use abrasive detergents,  teel wool or sharp objects for cleaning, so as to not irreparably damage the enameled parts. Use only water, soap or bleach-based detergents (ammonia).
GLASS PARTS
It is advisable to clean the glass window with an absorbent kitchen towel after every use of the oven. To remove more obstinate stains, you can use a detergent-soaked sponge,  ell wrung out, and then rinse with water.
OVEN WINDOW SEAL
If dirty, the seal can be cleaned with a slightly damp sponge.
ACCESSORIES
Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive detergents.
DRIP PAN
After using the grill, remove the pan from the oven. Pour the hot fat into a container and wash the pan in hot water, using a sponge and washing-up liquid.
If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan in the dishwasher or use a commercial oven detergent. Never put a dirty and back into the oven.
Self-cleaning oven with catalytic panels
Special self-cleaning panels covered in a micro-porous coating are available as optional extras for all models. If they are fitted, the oven no longer needs to be cleaned by hand.
The fat that is splattered onto the sides of the oven during roasting is eliminated by the microporous coating which breaks the fat down by catalysis and transforms it into gas.
Excessive splattering may nevertheless block the pores and therefore hinder self-cleaning. The self-cleaning capacity may be restored by switching on the empty oven to a maximum of about 10-20 minutes.
Do not use abrasive products, metal cleaning wads, sharp objects, rough cloths, or chemical products and detergents that may permanently damage the catalytic lining.
It is a good idea to use deep roasting trays to roast fatty foods such as joints of meat etc. and to put a tray underneath the grill to catch surplus fat. If the walls of the oven are so thickly coated in grease that the catalytic lining is no longer effective remove surplus grease with a soft cloth or sponge soaked in hot water.
The lining must be porous for self-cleaning to be effective.
N.B.: All catalytic linings currently on the market have a working life of about 300 hours. They should therefore be replaced after about 300 hours.
OVEN LIGHTING
Disconnect the power supply from the oven before cleaning or replacing the lamp. The bulb and its cover are made of material resistant to high temperatures.

REMOVAL AND CLEANING OF THE SIDE RACKS

  1.  Unscrew the bolt in an anti-clockwise direction.
  2. Remove the side racks by pulling them towards you.
  3. Clean the side racks in a dishwasher or with a wet sponge and then dry them immediately.
  4.  Having cleaned the side racks, put them back in and reinsert the bolts, ensuring that they are fully tightened.

ROSIERES Ovens - REMOVAL AND CLEANING OF THE SIDE
RACKS

REMOVAL OF THE OVEN WINDOW

  1. Open the front window.
  2. Open the clamps of the hinge housing on the right and left sides of the front window by pushing them downwards.
  3. Replace the window by carrying out the procedure in reverse.

REMOVAL AND CLEANING OF THE GLASS DOO R
1. Open the oven door.
2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards.
5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove the second and third glass (if present)).
7. At the end of cleaning or substitution, reassemble the parts in reverse order.
On all glass, the indication “Pyro” must be legible and positioned on the left side of the door, close to the left-hand lateral hinge. In this way, the printed label of the first glass will be inside the door.

ROSIERES Ovens - REMOVAL AND CLEANING OF THE GLASS
DOOR CHANGING THE BULB
1. Disconnect the oven from the mains supply.
2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
3. Once the defective bulb is replaced, replace the glass cover.
ROSIERES Ovens - CHANGING THE BULB

Troubleshooting

FAQ

PROBLEM POSSIBLE CAUSE SOLUTION
The oven does not heat up The clock is not set Set the clock
The oven does not heat up The child lock is on Deactivate the child lock
The oven does not heat up A cooking function and temperature has not been
set Ensure that the necessary settings are correct

INSTALLATION

ROSIERES Ovens - INSTALLATION If the mounting of the plinth does not allow air circulation, to obtain the maximum performance of the oven it is necessary to create an opening of 500x10mm or the same surface in 5.000 mm².

If the oven does not have a cooling fan, create an opening 460 mm x 15 mm

ROSIERES Ovens - INSTALLATION 2

The manufacturer will not be responsible for any inaccuracy resulting from printing or transcript errors contained in this brochure. We reserve the right to carry out modifications to products as required, including the interests of consumers, without prejudice to the characteristics relating.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals