HALNY HLE-3GM Router Installation Guide
- June 3, 2024
- HALNY
Table of Contents
HLE-3GM Router
**Installation Guide
**
Safety Guidance
1.1 Safety Check
Before installing the device, you must check the following items.
1.1.1 Electric Safety
- Ensure that there are no inflammable, conductive or moist objects around. Check whether the cables are aged and whether other electrical appliances are placed stably.
- Check whether the alternating or direct input current is within the allowed range of the device, whether the polarity of the direct current Is correct, and whether the earth line is properly connected.
1.1.2 Device Position
- Because the running electric device easily generates heat, please ensure to place the device in a well-ventilated environment,
- Avoid direct sunshine, and do not place the device on a PC case,
- Keep the device away from heat and water.
- Check whether power supply is available. The input voltage fluctuation range must be smaller than 10%. The power plug should not share one socket with a hair drier, an iron or a refrigerator.
1.2 Safety Caution
- Read the quick installation guide carefully before using the device,
- Note all Cautions In the quick Installation guide,
- Do not use any accessory that does not belong to the device without prior consent of the manufacture, as it may cause fire or product damage,
- Use the power adapter accompanied In the package,
- Do not place any object on the device.
- Keep the device dry, ventilated, rainproof, and clean,
- During lightning weather, unplug the power plug and all connection cables. to protect the device against lightning,
- Clean the device using a soft and dry cloth rather than liquid or atomizers. Power off the device before cleansing it,
- Power off the Idle device,
- Keep the ventilation hole clean and prevent any object from dropping into the device through it. Otherwise, it may cause short circuit and further cause device damage or fire. Do not spray liquid on the surface of the device.
- Do not open the case of the device. especially during device power-on.
- Before plugging or unplugging the power, ensure that the power is off, thus avoiding surge,
- Be careful when unplugging the power, as the transformer may be very hot.
- Cover the optical interface with fiber interface cap when it is not in use. Avoid direct eye exposure to the laser emitted from the optical interface. Wear safety glasses if possible. to protect your eyes.
Caution :
Please read the above safety guidance carefully before device use. Users
should assume responsibilities for any accidents due to Incompliance with the
above Instructions.
Overview
This chapter mainly describes functions and the structure of the HALNy HL-3GM.
2.1 Features and Function
- Fast data rate. Support up to 1Gbps downstreamiupstream data transmission rates,
- Strong maintainability. Provide various statuses of LED indicators, to help troubleshooting.
2.2 Front and Rear Panel
The description of the front panel and the rear panel of the router as
follows.
2.2.1 Front Panel
Color | Status | Description |
---|---|---|
Red | On | The power works normally. |
Green | On | WAN interface is up and connected with ISP services |
Table 1.LEO Indication Table
2.2.2 Rear Panel
Interface! Button | Function |
---|---|
LAN | Ethernet Interface, for connecting to a computer or an Ethernet Interface |
of a switch.
WAN| Ethernet interface, for connecting to Wide Area Network
Reset| Press and hold to reset
WPS| Press and hold for 5 seconds to pair device via WPS
Power| Turn on/off power
Table 3.Rear Panel port description
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>