Abbott NAVICA Participants in the Testing Program User Guide
- June 3, 2024
- Abbott
Table of Contents
Abbott NAVICA Participants in the Testing Program
Access the NAVICAa„¢ website mynavica.abbott
Create your account
- Follow the instructions in the Create an Account guide.
- In the additional details section of profile setup, choose the primary use from the list below:
- Education: K-12
- Education: University or College
- Employer / Employee
- First Responder / Healthcare Staff
- Independent Senior Citizen
- enior Care Resident or Staff
- Travel
- All Other
Connect your profile(s) to an organization
- Once you have created your NAVICA™ account, you will need to connect the profile of the individual that is enrolled in the COVID-19 testing program with the organization to automatically share future results.
- The Connect Code will be sent to you via email from noreply@navica.abbott.
- Follow the instructions in the Connect to an Organization guide.
Get your tests
This area is editable for you to describe how the test kits will be distributed. Examples:
- Please pick up your kits at the front desk in the lobby on Monday, 8/15, between 1 and 3 p.m.
- Test kits will be sent directly to your home from Abbott.
To learn more about antigen testing and the science behind it, visit BinaxNOW-selftest.abbott
Test
Add your testing program guideline for testing frequency.
Example:
- You will be sent a reminder to test on Sunday and Tuesday of each week.
- Testing verification is required before attending your organization on Monday and Thursday mornings.
Participants will collect their own swab specimens at home via an easy-to-use, painless nasal swab that takes less than 1 minute.
- Review BinaxNOW™ COVID-19 Antigen Self Test Video and instructions provided in the test kit to learn about the test and to familiarize yourself with the test materials and procedure prior to performing any tests.
- Complete the test by following the instructions in the test kit.
Record results
The participant in the testing program should enter the test results into the NAVICAâ„¢ website. The record will remain in NAVICAa„c for reference.
- Follow the instructions on the NAVICA™ website. For more detailed instructions on entering your test result, here is a Quick guide.
- Your results will automatically be shared with your organization. No action is needed from you as long as you stay connected.
- Test results will be saved in NAVICA™, so you can print your results to share with other organizations as needed.
NAVICA™ Q &A
The BinaxNOW™ COVID-19 Antigen Self Test has not been FDA-cleared or approved.
It has been authorized by the FDA under an emergency use authorization. It has
been authorized only for the detection of proteins from SARS-CoV-2, not for
any other viruses or pathogens, and is only authorized for the duration of the
declaration that circumstances exist justifying the authorization of emergency
use of in vitro diagnostics for the detection and/or diagnosis of COVID-19
under Section 564(b)(1) of the Federal Food, Drug and Cosmetic Act, 21 U.S.C.
§ 360bbb 3(b)(1) unless the declaration is terminated or authorization is
revoked sooner. For serial testing, the BinaxNOW COVID-19 Antigen Self Test
should be performed twice over 3 days, at least 24 hours (and no more than 48
hours) apart. For symptomatic use, a single test can be used.
© 2022 Abbott. All rights reserved. All trademarks referenced are trademarks
of either the Abbott group of companies or their respective owners. Any photos
displayed are for illustrative purposes only. COL-07087-02 01/22
TEST PROCEDURE
- Add the extraction reagent
- Swab both nostrils
- Insert sample swab into the test card and rotate the swab shaft three times
- Close the test card; wait 15 minutes
- Results are read visually
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>