NU REPUBLIC Bluetooth Wireless Stereo Headset User Manual
- June 7, 2024
- Nu Republic
Table of Contents
NU REPUBLIC Bluetooth Wireless Stereo Headset User Manual
Nu Republic thanks you for showing confidence in our products and becoming our valued customers.
To ensure a delightful product experience Nu Republic recommends reading the User Guide carefully and contacting our customer care helpline to understand the product warranty period and conditions.
In an unlikely event of the product not working, or for any troubleshooting, please reach out to our customer taro team and wo will be happy to be of help.
Helpline Number: +91.8826257630
Working Hours: Monday to Friday: 10:00 AM – 5:30 PM (except national and
public holidays)
Email: hello@alchemie.co
LOCATION OF CONTROLS
Power ON/OFF; Play/ Pause; Receive call/ Transfer call/ End call- Micro USB jack for charging
- Microphone
- AUX IN jack
- +: Long press to increase the volume; short press to skip to next track
- −: Long press to decrease the volume; short press to skip to previous track
- Function LED indicator (blue for Bluetooth mode. red for charging)
POWER SUPPLY
The unit is powered by a built-in, lithium-polymer rechargeable battery. Charge the built-in battery for at least four hours before using the device for the first time.
To charge the internal battery, connect the smaller end of the supplied USB cable to the Micro USB jack and the other end to a powered USB jack on your computer or an AC power supply (not included). The function LED indicator will change to rod color during charging and lights off when the battery becomes fully charged.
WARNINGS:
- While using the built-in battery, the environmental temperature should be 5°C (41°F) to 35°C (95°F).
- Chemical burn if mistreated. Do not disassemble, heat above 100°C (212°F), or incinerate.
- To get the longest service life of the built-in battery, charge at indoor-temperature.
- Attention should be drawn to the environmental aspects of battery disposal.
- Do not throw batteries in fire!
- Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
- When the battery is low, the unit will beep every 20 seconds. The unit will turn off automatically when the battery is too low to work.
OPERATION
Turning unit ON/OFF
Long press 
to turn ON the unit. The function LED indicator will light
on.
Long press again to turn OFF the unit. The function LED indicator will
light off.
The Bluetooth® word mark and logos are registered trademarks owned by Bluotooth SIG, Inc.
PAIRING A BLUETOOTH DEVICE
Long press to turn ON the unit. The function LED indicator will blink blue and
red alternately indicating it’s in pairing mode. On the Bluetooth device,
enable Bluetooth and select” BM-1011″ from the Device List.(Refer to the user
manual of the device to be connected for detailed operations.) If the
Bluetooth device prompts for a pass code, use “0000”.Some Bluetooth devices
will ask you to accept the connection. If the units are paired properly, you
will hear an indication sound. If there is no pairing or pairing is not
successful within 10 minutes, the headphone will turn off automatically.
Tip: If you want to connect your headphone to another Bluetooth audio device,
you need to disconnect current device first and follow the steps above to make
a new connection.
- On some devices such as computers, once paired you must select the unit from the Bluetooth menu and choose “Use as Audio Device (stereo)” or similar.
- Pairing remains intact when the unit and/or your Bluetooth device is taken out of communication range. An active connection will be re-established when your Bluetooth device returns within range.
- When the unit is turned on again, it will automatically try to reconnect with the most recently paired Bluetooth device.
USING A BLUETOOTH DEVICE
- With a unit paired (see previous section), operate your Bluetooth device and its sound will be heard through the headphone.
- Press the button to pause playback. Press again to resume playback.
- Long press+/− buttons to adjust the volume level. You can also adjust the volume on the device to which you are paired.
- Short press+/− buttons to select your desired audio file.
Note: The Bluetooth indicator will blink blue during playback.
RECEIVING A PHONE CALL
This unit is equipped with a built-in microphone, which allows you to make or end calls of a connected mobile phone through this unit. Make sure your Bluetooth-enabled mobile phone is paired with the unit. When there is an incoming call to the connected mobile phone, you will hear an incoming call alert tone from the unit.
- Press the button to answer the incoming call.
- Press the button again to end call.
- To reject the incoming call, press and hold the button.
- To transfer the sound between the unit and the mobile phone, press and hold the button during a call.
USING AUX IN JACK
- Insert one end of an audio cable into the LINE OUT or Headphone jack on your external audio device and the other end into the AUX IN jack on the headphone. (Note: If the headphone is in ON mode, it will automatically turn OFF once the audio cable is plugged in.) The headphone will work as a normal wired headphone.
- Start playback of the external device and the external audio device’s output sound will be heard through the headphone.
- To adjust volume, use the volume control on the external audio device.
- To stop playback. disconnect the audio cable from the AUX IN jack of the headphone.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking
service:
No Power
- Power is not on; Long press to turn ON the unit.
- Make sure the battery is recharged. The Bluetooth device cannot pair or connect with the unit.
- You have not activated the Bluetooth function of your device. Refer to the user manual of your device to activate Bluetooth function.
- The unit is already connected with another Bluetooth device; disconnect that device and then try again.
SPECIFICATIONS RECHARGEABLE BATTERY
- Battery Type: 3.7V 370mAh Lithium-polymer
- Battery Charging power: DC 5V 300mA
- Operating Time: >10 hours at 60% volume after fully charged
- Charging Time: Approx. 3-4 hours
- Maximum output voltage ≤ 15mVWide Band
- Characteristic Voltage ≥ 2.- 75mV
BLUETOOTH
- Bluetooth: 2.4-2.480GHz RF
- Output Power: 0 dBm
- Bluetooth Version: V4.2 + EDR
- Working Distance: Up to 10 meters measured in open space (wall and structures may affect range of device)
Specifications are subject to change without notice.
Warranty
This Warranty is subject to following terms.
- The warranty is given only to original purchaser of the product (“customer”)
- The warranty will be applicable for 12 months from date of original purchase or 18 months from date of import as mentioned in the import sticker on the box whichever is earlier. The customer has to present PROOF of PURCHASE/Invoice for claiming any warranty
- For entire Warranty Period, Nu Republic or its authorized representative will at their discretion repair or replace defective product. Repair or replacement may involve the use of same or equivalent reconditioned unit. Nu Republic will return the repaired product or can replace with another same or equivalent product to the customer in full working condition. All replaced /faulty parts or components with become property of Nu Republic
- The details of the service locations can be taken from our service helpline, It is the responsibility of the Customer to bring the product to the Nu Republic Service Location at his/her own risk and expenses
- For any product repaired or replaced during warranty period, the repaired or replaced product shall continue to be within period of the original product
The warranty will not be applicable under the following circumstances:
- The product code/serial number water indicator or warranty seal has been removed, erased defaced altered or is illegible No full stops In in any line “,
- Deterioration of the product due to normal wear and tear
- Use other than in accordance with the user manual rough handling, ingression of /exposure to any kind of liquid(water, sweat, beverages, oils etc.) exposure to moisture, dampness or exposure to extreme environmental conditions corrosion, oxidation unauthorized repairs, unauthorized spare parts usage accidents, forces of nature or other actions beyond reasonable control of Nu Republic unless the defect was caused directly by defects in material or workmanship
- The warranty will also not cover any physical damage to surface of the product including but not ,limited to scratches on the body parts
- Defects caused by the fact that the battery has been short circuited or by the fact that the seals of the casing or any evidence of tampering or the product is used for equipment other that for which it is certified will not be covered under warranty
FOR ANY CLAIM UNDER THE WARRANTY IS SUBJECT TO NOTIFICATION TO NU REPUBLIC FOR THE ALLEGED DEFECT WITHIN A REASONABLE TIME OF IT OCCURANCE AND IN NO EVENT NOT LATER THAN EXPIRY OF WARRANTY PERIOD
NU REPUBLIC /AUTHORIZED PARTNER WILL NOT BE RESPONSIBLE FOR ANY KIND OF LOSSES DIRECT OR INDIRECT RESULTING DUE TO ANY LOSS OF CUSTOMER DUE TO NON FUNCTIONING
NU REPUBLIC’S OBLIGATION UNDER THIS WARRANTY SHALL BE LIMITED TO REPAIR OR PROVIDING REPLACEMENT OF PARTS ONLY. THE MAXIMUM CLAIM ENTERTAINED BY NU REPUBLIC WILL BE SUBJECT TO MAXIMUM RETAIL PRICE OF THE PRODUCT OR PURCHASE PRICE (AS PER INVOICE) WHICH EVER ONE IS LOWER
In event of any unforeseen circumstances, there is unavailability of certain spare parts, prevailing depreciation rules will be binding on the purchaser to accept as a commercial solution in lieu of repairs
Helpline Number: +91.8826257630
Working Hours: Monday to Friday: 10:00 AM – 5:30 PM (except national and
public holidays)
Email: hello@alchemie.co
WARNING: The company reserves the right to the product modification for appearance and function, which is subject to change without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>