oxford BABY 11595 RHINEBECK 4 IN 1 CONVERTIBLE CRIB Instructions

ASSEMBLY INSTRUCTIONS for Guard Rail

RHINEBECK 4 IN 1 CONVERTIBLE CRIB
Model #11595

1 of 5

Thank you for your purchase!

Remove all parts and hardware from the box and lay on a carpeted or scratch -free work surface.
Do not dispose of any contents until assembly is completed.
Familiarize yourself with all exhibits and diagrams to facilitate the assembly of your crib.

TOOLS REQUIRED:

ALLEN KEY (included)

PARTS ENCLOSED IN CARTON

A. Guard Rail (1 pc)

HARDWARE

(B) Allenbolt 2″(50 mm) (4 pcs)   (D) Nut 3/4″ (20mm) (4 pcs)

(C) Spring washer (4 pcs)              (E) Allen key (2 pcs) (length may vary)

Do not fully tighten all bolts until all parts are in place.
(please add an extra 1/2 revolution to the bolts when using spring washer after tightening)

2 of 5

STEP 1 “UNINSTALL FOOTBOARD”

THIS STEP REQUIRES:

E. Allen key (1 pc)

STEP 1:
Remove Footboard by unscrewing (4 pcs) Allen Bolts as shown.

3 of 5

STEP 2 “MATTRESS SUPPORT HEIGHT ADJUSTMENT”

THIS STEP REQUIRES:

These hardware are included in the CRIB

N. Allen key (2 pcs)

K. Allenbolt 1″(25mm) (4 pcs)      L. Nut 3/4″ (20mm) (4 pcs)

FIG.3.                                                           FIG.2.

STEP 2:
– Remove the Allen bolt 1″(25 mm) (K), Spring Washer (W) and Nut 3/4″(20 mm)(L) on the Mattress spring.
– Move Mattress spring to the lowest position as shown in FIG.2.
– Attach the Allen bolt 1″(25 mm)(K), Spring washer (W) and Nut 3/4″(20 mm)(L) on the lowest hole of Sideboard.
– Final position as shown in FIG.3.

4 of 5

STEP 3 “ASSEMBLY OF GUARD RAIL”

THIS STEP REQUIRES :

A. Guard rail (1 pc)
E. Allen key (2 pcs)

B. Allen bolt 2″(50 mm) (4 pcs) C. Spring washer (4 pcs) D. Nut 3/4″ (20mm) (4 pcs)

STEP 3:
– Insert the Allen bolt 2″(50 mm) (B), Spring washer (C) through the top and bottom hole in the crib sideboard and guardrail and connect with nut 3/4″ (20 mm) (D).
– Tighten all bolts and nuts with Allen key (E). Assembly complete. Thanks You!

5 of 5

  “ CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 INCHES (69 CM) BY 51 5/8 INCHES (131 CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15 CM). THE DIMENSIONS OF THE MATTRESS SHALL BE TAKEN FROM SEAM TO SEAM OR EDGE TO EDGE WHERE APPROPRIATE.”

  WARNING!

FOR TODDLER BED USE

• READ ALL INSTRUCTIONS BEFORE ASSEMBLING TODDLER BED.
  KEEP INSTRUCTIONS FOR FUTURE USE.

• FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH FROM ENTRAPMENT OR STRANGULATION.

• CAUTION: THE MATTRESS INTENDED FOR USE ON THE BED SHALL BE A FULL-SIZE CRIB MATTRESS HAVING MINIMUM DIMENSION OF 51 5/8 INCHES (1310 MM) IN LENGTH AND 27 1/4 INCHES (690 MM) IN WIDTH AND NOT EXCEEDING 6 INCHES (150 MM) IN THICKNESS. THE DIMENSION OF THE MATTRESS SHALL BE TAKEN FROM SEAM TO SEAM OR EDGE TO EDGE WHERE APPROPRIATE.

• THE MINIMUM AGE OF THE INTENDED USER SHALL NOT BE LESS THAN 15 MONTHS AND THE MAXIMUM WEIGHT SHALL NOT BE GREATER THAN 50 LB (22.7 KG).

• GUARDRAIL (SOLD SEPARATELY) MUST BE USED WHEN CRIB USED AS A TODDLER BED TO AVOID THE FORMATION OF A GAP BETWEEN THE MATTRESS AND THE BED THAT COULD CAUSE AN ENTRAPMENT.

• DO NOT PLACE BED NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPES MAY STRANGLE A CHILD.

• DO NOT PLACE ITEMS WITH A STRING, CORD, OR RIBBON AROUND A CHILD’S NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS.

• DO NOT SUSPEND STRINGS OVER A TODDLER BED FOR ANY REASON.

• WHEN STORING TODDLER BED USE CAUTION AS EXTREME CHANGE IN TEMPERATURE OR HUMIDITY CAN COMPROMISE THE TODDLER BED MAKING IT EXTREMELY DANGEROUS TO YOUR CHILD. STORE THE TODDLER BED IN A CLEAN DRY PLACE.

• USE CAUTION WHEN A VAPORIZER OR HUMIDIFIER IS IN USE. ALWAYS AIM VAPOR AWAY FROM THE TODDLER BED AS WELL AS ANY OTHER WOODEN FURNITURE. PROLONGED PERIODS OF HUMIDITY IN STORAGE AS WELL AS THE HOME CAN COMPROMISE THE TODDLER BED.

• AVOID USING VAPORIZERS AND HUMIDIFIER FOR PROLONGED PERIODS OF TIME.

• PLEASE DISPOSE ALL PACKAGING AND PLASTIC BAGS.

• PLEASE CLEAN THE TODDLER BED WITH A DRY CLOTH AND USE MILD WOOD POLISH IF REQUIRED.

• PREVENT BURNS. KEEP BED AWAY FROM OPEN FIRES AND OTHER HEAT SOURCES.

• CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, LOOSE BOLTS OR OTHER FASTENERS, MISSING PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE. SECURELY TIGHTEN LOOSE BOLTS AND OTHER FASTENERS. DO NOT USE CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN CONTACT M DESIGN VILLAGE , 701 COTTONTAIL LANE, SOMERSET, NJ 08873; PHONE: 1-844-247-5908; EMAIL: [email protected] FOR REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE IF NEEDED. DO NOT SUBSTITUTE PARTS.

WARNING ENTRAPMENT/STRANGULATION HAZARD

• INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT AND STRANGULATION.
• FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
• NEVER USE BED WITH CHILDREN UNDER 15 MONTHS.
• NEVER PLACE BED NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPES MAY STRANGLE A CHILD.

WARNING

INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.

• OPENINGS IN AND BETWEEN BED PARTS CAN ENTRAP HEAD AND NECK OF A SMALL CHILD.
• NEVER USE BED WITH CHILDREN YOUNGER THAN 15 MONTHS.
• ONLY USE FULL-SIZE CRIB MATTRESS OF THE RECOMMENDED SIZE.
• ALWAYS FOLLOW ASSEMBLY INSTRUCTIONS.

WARNING

STRANGULATION HAZARD

• NEVER PLACE BED NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPES MAY STRANGLE A CHILD.
• NEVER SUSPEND STRINGS OVER BED.
• NEVER PLACE ITEMS WITH A STRING, CORD, OR RIBBON, SUCH AS HOOD STRINGS OR PACIFIER CORDS, AROUND A CHILD’S NECK. THESE ITEMS MAY CATCH ON BED PARTS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>