My SpotClean ProHeat® Portable Carpet Cleaner/ My Little Green® ProHeat® Portable Carpet Cleaner has No Suction | Support
- June 7, 2024
- Bissell
Table of Contents
If you are experiencing No/Low Suction, follow these steps to resolve:
-
Turn off and unplug machine
-
Remove & empty dirty water tank
- Firmly push the plug back into place
-
Remove float from dirty water tank
- Rinse float under water to clear of any debris
- Reinstall float into dirty water tank
-
Plug machine in and turn on
-
Feel for suction at the motor duct underneath where the dirty water tank sits
- Is there suction?
- Yes > Turn machine off and unplug
- No > Visit a BISSELL Authorized Service Center or Contact Us
-
Remove & squeeze the flat end of the black “duck bill” gasket under the dirty water tank until it opens up
-
Reinstall gasket inserting the tall side into the right,curved, outer side of the tank
-
Put Dirty Water Tank back onto machine
-
Plug machine in and turn on to test for suction
- Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
- No > Go to No Suction Hose and Tool
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>