My CrossWave® Cordless has a loud noise | Support
- June 7, 2024
- Bissell
Table of Contents
-
When reclined, the brush will spin – this sound is normal
-
When dirty tank is full, the float inside will activate and the motor pitch will change
- This sound is normal and the dirty water tank should be emptied
-
- While emptying the dirty water tank, rinse and manually move the float up and down to ensure it moves freely
- Also be sure to insert the filter completely in place (reinstall it)
- While emptying the dirty water tank, rinse and manually move the float up and down to ensure it moves freely
-
- With the machine turned off and unplugged, check to see if the front nozzle and brush roll are installed properly on the foot
- Spin brush roll by hand to verify smooth motion
- With the machine turned off and unplugged, check to see if the front nozzle and brush roll are installed properly on the foot
-
If the noise extremely loud or abnormal, visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
-
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>