DURAVIT N1 7952 Softening Mirror Instruction Manual
- June 12, 2024
- DURAVIT
Table of Contents
Duravit No.1
# N1 7952
Mounting instructions
Installation
Intended use
The mounting instructions come as part of the Duravit product and are aimed at
people who carry out the electrical installation for the product. You must
read through the mounting instructions carefully and they must be available
at all times.
Target readership and qualifications
The electrical installation may only be carried out by qualified electricians.
Protection rating of Duravit products
The protection rating of Duravit products with a power supply complies with
the IP 44 standard as a minimum.
Protection class of wall lights
| Protection class | Connecting cable |
|---|---|
| I | H05VV-F, 3x 1.5 mm2 |
| II | H03VV-F, 2x 0.75 mm2 |
Standards and directives
**** Duravit products comply with the CE marking directives:
Icons and symbols
| Symbol | Meaning |
|---|---|
| > | Action required |
Instructions for use
- The bathroom furniture range complies with the stand- ards and guidelines applicable at the time of delivery and is designed for use in bathrooms.
- Direct contact with water should be avoided, for example, when showering.
- A power supply of 110 V – 230 V must be available on site.
- We reserve the right to make technical improvements and design modifications to the products illustrated.
Disposal
- Do not dispose of the product in household waste. Products with this symbol must be disposed of in accordance with the WEEE Directive through local collection points for waste electrical equipment.
Safety instructions
Danger to life
Contact with electricity may lead to an electric shock.
Carry out the electrical installation in accordance with the national, European and international directives and standards.
Observe protection zones for wet rooms in accordance with country-specific standards, local regulations and low voltage guidelines.
Connect the electrics using a ground fault circuit interrupter (GFCI) in wet rooms or other specially equipped rooms.
Disconnect electrical components from the power supply before the installation.
Check that all components are de-energised.
Prevent the power supply from being switched on accidentally.
Penetration of foreign bodies and water
Foreign bodies or water in equipment lead to a short circuit that may cause damage to the product.
Observe the protection zones for Duravit products.
Protection zones
A A mirror cabinet with an IP 44 rating may protrude into zone 2.
B A socket in a mirror cabinet must be mounted outside the zones.
Energy efficiency class
- This product contains an energy efficiency class Clight source.
Order no. N17952/22.01.1
Duravit AG
P.O. Box 240
Werderstr. 36
78132 Hornberg
Germany
Phone +49 78 33 70 0
Fax +49 78 33 70 289
[email protected]
www.duravit.com
Order no. N17952/22.01.1 We reserve the right to make technical improvements
and enhance the appearance of the products shown.