OVERSTEEL KYANITE Gaming PC Case User Manual

June 9, 2024
OVERSTEEL

OVERSTEEL KYANITE Gaming PC Case

TECHNICAL SPECIFICATIONS

  • MODEL KYANITE
  • DIMENSIONS (L x W x H) 350mm x 200mm x 470mm
  • WEIGHT 4,1Kg
  • MATERIAL Steel 0,5mm SPCC, tempered glass
    • Front : 3x 120mm (3x A-RGB included)
    • Rear : 1x 120mm (1x A-RGB included)
  • FANS LOCATION PSU
    • Bay : 2x 120mm
    • Top : 2x 120mm
  • WATER COOLING
    • Front : up to 360mm radiator
    • Top : up to 240mm radiator
    • Rear : up to 120mm radiator
  • DRIVE BAYS 2x 2,5″ + 2x 3,5″/2,5″
  • EXPANSION SLOTS x7
    • USB 3.0 x1
    • USB 2.0 x2
  • FRONT I/O
    • Headphone/Microfone x1
    • Power
    • Reset/LED
  • DUST FILTER
    • 1x Top
    • 1x Bottom
  • MOTHERBOARD TYPE ATX, MicroATX, ITX
  • POWER SUPPLY ATX up to 160mm (not included) bottom position
  • VGA (GPU) Up to 295mm (not included)
  • CPU COOLER Up to 160mm (not included)

DIMENSIONS

PC CASE GENERAL DIAGRAM

  1. Magnetic dust filter
  2. Side tempered glass
  3. Back metal side
  4. 120mm RGB fan
  5. PSU enclosure bay
  6. HDD/SSD Enclosure Bay
  7. Front panel I/O
  8. PCI expansion bays

FRONT PANEL I/O AND MOTHERBOARD CONNECTORS

ACCESSORY BAG

BASIC INSTALLATION

  1. Disassemble the side panel and the front panel

  2. Take out the screws before dissasembling side panel

  3. Remove the side panels before dissasembling the front panel

  4. Special atention to the tempered glass side panel. Handle with care

  5. Install the power supply
    Make sure the screw holes for PSU and the PC case are alligned before screwing

  6. Install the motherboard
    Make sure that the motherboard aims at the copper cylinder and install the standoffs (No.1) before screwing in with the No.2 screwsOVERSTEEL-KYANITE-
Gaming-PC-Case-FIG-9

  7. ITX

  8. Micro-ATX

  9. ATX

  10. Install HDD/SSD

  11. Use the screws (2) to secure the SSDs.

  12. Use the screws (4) to fix it to the base of the bay.

  13. Install GPU and expansión slot (PCI)
    Remove the bafle marked in the picture, make sure the VGA card aims at the motherboard slot and then fix VGA card and case with No.3 screw.

  14. Install fan and radiator (optional)

FRONT

  • Fans → 3x 120mm
  • Radiator up to 360mm

TOP

  • Fans → 2x 120mm →2x 140mm
  • Radiator up to 240mm

REAR

  • Fans → 1x 120mm
  • Radiator up to 120mm

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals