Pet Hair Eraser® Cordless Hand Vac Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove Dirt Tank from Hand Vac
-
Pull Filter from Dirt Tank > Empty debris from Dirt Tank
-
Twist Filter to remove from Filter Frame (machine should not be used without Filter & Filter Frame installed)
- Clean debris from both > Filter & Frame can be rinsed in warm water > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Insert Filter into Filter Frame > Twist to secure
-
Insert Filter & Frame into Dirt Tank > Ensure it is flush and not angled
-
Rubber flap on Dirt Cup should be positioned inside the Dirt Cup
- If flap is pushed out into the channel where tool attaches, suction will be reduced
- Use finger or blunt object such as the eraser end of a pencil to push back into place
-
Connect Dirt Cup to machine
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Brush Attachment
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>