My ICONpet™ Robotic Vacuum has No Suction | Support
- June 7, 2024
- Bissell
Table of Contents
Please Note: The ICONpet Robot is not intended for use on plush/dense carpet or some rubber backed rugs
Is there an error displaying on your robot?
-
Yes > Go to Display Errors for remedies
-
No > Empty Dirt Bin
- Pull up on the Dirt Bin to remove
- Press button to open lid
-
Clean debris around Separator Cone
- If necessary to clear debris, carefully twist cone to remove
-
Pinch and pull the Filter Assembly from the back of the Dust Bin
- Separate Filter from assembly
- Both can be rinsed in warn water, allow to completely dry before reinstalling
-
Reassemble Separator Cone and Filter Assembly when completely dry
Accumulated debris in the brush area could also inhibit suction, for a complete list of steps see Brush Jammed
If you continue to have no suction, please Contact Us
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>