HMS Wireless Router 4G User Guide
- June 7, 2024
- HMS
Table of Contents
HMS Wireless Router 4G
Product Overview
Technology
| Standard | 3GPP 4G LTE Release 15. |
|---|
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet copper
IEEE 802.3x Flow Control and back-pressure
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
ITU-T G.8032 version 2 Ethernet ring protection switching(ERPSv2)
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1Q-2005 Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.1X Port based Network Access Protocol
IEEE 1588 Precision Time Protocol v2
IEEE 802.3af/at Power-over-Ethernet
Interface
Ethernet Port| LAN: 8x 10/100/1000Base-T RJ45, Auto Negotiation, Auto
MDI/MDI-X, with 4x IEEE 802.3af/at PoE/PoE+
WAN: 2x 100/1000Base-T RJ45, Auto Negotiation, Auto MDI/MDI-X
---|---
System LED| 1 x Ring: Off: Ring disabled, Green On: Ring normal (Not RPL
Owner), Green Blinking: Ring normal (RPL Owner), Amber On: Ring abnormal,
Amber Blinking: Ring port fail
1 x DO (Red)
1 x Power (Green)
2 x Cellular(LTE) (Green),
Ra: SIM detected: Green On, SIM not inserted: Off Rb: LTE connection: Green
On, disconnected: Off 1 x WLAN (Green, WLAN version only),
Rc: AP mode: Green On, Station mode connected: Green Blinking, Station
mode/radio disable: Off 1 x System (Green)
4 x PoE (Green, PoE model only)
Ethernet Port LED| Link (Green On), Activity (Green Blinking), Speed
1000M(Amber On), Speed 100M(Off)
Reset| System Reset (2~6 Seconds) / Default Settings Reset (over 7
Seconds)
SMA Connector| 4x SMA Female socket for LTE Antennas
SIM Socket| 2x 4FF Nano SIM
Power Input, Digital Output| 4-Pin Removable terminal block connector,
grey with lock 2 Pin for power Input
2 Pin for relay
DO: Dry relay output with 0.5A/24V DC
Cellular Properties
| Standard | 4G Multi-mode, 3GPP Rel.15 LTE Cat.20 |
|---|---|
| Frequency Bands | LTE FDD B1/B3/B7/B20 |
LTE TDD B38/B42/B43
Other bands available on request
Software
Management| CGI WebGUI, Command Line Interface (CLI), IPv4/, Telnet,
SNMP v1/v2c/v3, RMON, LLDP, DHCP server/client/Option 82, TFTP, System Log,
SMTP
---|---
Traffic Management| Flow Control, Rate Control, Port Mirror, CoS, QoS,
RFC 2474 DiffServ
Filter| IGMP Snooping v1/v2/v3, IGMP Snooping, IGMP Query, GMRP,
IEEE802.1Q VLAN, QinQ, GVRP, Private VLAN
Security| IEEE 802.1X/RADIUS, TLS v1.2, HTTPs/SSH, First login password
management
Advanced Security| TACACS+, Mutli-user authentication, IEEE802.1x MAB,
DHCP Snooping/IPSG, Dynamic ARP inspection, SFTP
Redundancy| ERPSv2 (HW-based CFM), STP/RSTP/MSTP, Port Trunk/LACP
Time Management| NTP, IEEE 1588 Precision Time Protocol v2
WAN/Routing/NAT/Firewall/ VPN| Throughput of WAN ports routing: 70
Mbps Dual WAN Interface (Port 9-10)
Routing: RIPv2, OSPFv2, VRRPv2, *Static Multicast Route NAT: 1-1 NAT,
NAPT(SNAT/DNAT)
Cellular: “Routing behind MS”, “passthrough” Firewall: Stateful Inspection
firewall, DMZ VPN: IPSec, OpenVPN, GRE, L2TP
MIB| ERPS MIB, MIB-II, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB
Cellular Configuration| Radio on/off, 4G LTE Configuration, SIM
Security, Connection Status, Cellular Time
Power Requirement
| Input Voltage | 24VDC (9.6-57 VDC for both PoE/Non-PoE models) |
|---|---|
| Reverse Polarity Protect | Yes |
| Input Current | 5.54A@24VDC with 120W PD loading |
| Power Consumption | Max 12W@24VDC full traffic without PD Loading |
PoE
| Power forwarding mode | Alternative A |
|---|---|
| PoE Power Budget | System: Max. 60W@70°C/12V, 120W@70°C/24V, |
Per Port: Max. 30W
PoE Standard| IEEE 802.3af/at
Management| PoE Enable/Disable, System/Port Power Budget Control, PoE
Scheduling, PoE Status
Mechanical
| Installation | Wall mount/Din rail mount |
|---|---|
| Enclosure Material | Steel Metal with Aluminum |
| Dimension | 200x 55 x 126 (W x H x D) / without Mounting Clip |
| Ingress Protection | IP30 |
| Weight | ~1500g without package |
Environmental
| Operating Temperature & Humidity | -40°C~70°C , 5%~95% Non- Condensing |
|---|---|
| Storage Temperature | -40°C~85°C |
| MTBF | >200,000 hours |
CE Conformance
| Safety | EN62368-1(LVD) |
|---|---|
| Radio | EN62311 EN301908-1/13 |
| EMC | EN301489-1/52 EN61000-6-2/4 EN55032/55035, Class A EN55016-2-3, |
Class A
Ordering Information
| Model Name | NV1004 Wireless Router 4G |
|---|---|
| Package List | 1 x Product Unit |
1 x 4-pin Removable Terminal Block Connector
1 x Wall mounting kit
4 x Antennas
Accessories| E-014 Power supply including EU, UK and USA plug
Dimensions
Documents / Resources
| HMS
Wireless Router
4G
[pdf] User Guide
Wireless Router 4G
---|---