HMS motorsport SP1 SH HKLBI Helmet Speaker Kits Instruction Manual
- June 6, 2024
- HMS motorsport
Table of Contents
HMS motorsport SP1 SH HKLBI Helmet Speaker Kits
SH HKLBI Installation Instructions
- Secure helmet to prevent damage and ensure ease of installation
- Remove the right cheek pad. The chin pad will be removed and replaced with the new one.
- Remove the chin pad and loosely place the equipment into the helmet
- Find the connector tether and work the clip onto the rubber seal around the bottom. It is recommended to take your time and carefully use a small screwdriver to help guide the part over the seal.
- Carefully work the clip into place as shown. It needs to be as far back against the main EPS as possible.
- In the same manner as in step 4 and 4.1, carefully install the earbud clip on the same side as your microphone and move into place wherever is most comfortable for the driver.
- Install a cheek pad, then the chin pad followed by the remaining cheek pad. Don’t forget the chin straps!
- Drop the earbud connector into the clip as shown and you’re ready to go .
Read User Manual Online (PDF format)
Loading......