hjh EMBASSY 200 Professional Executive Chair Instruction Manual
- June 3, 2024
- hjh
Table of Contents
Assembly instructions
EMBASSY 200
EMBASSY 200 Professional Executive Chair
See the back of this sheet for further information.
Assembly
- Mount the mechanism into the seat.
- Mount the back rest onto the seat.
- Mount the arm rests onto the seat.
- Insert the five castors into designated holes at the bottom of the 5-star base. Insert the gaslift into the center of the base. If present, remove the plastic protective cap from the gas lift. Put the cover over the gas lift.
- Place the seat onto the gaslift.
- Repeatedly sit onto the chair, so that the connections between the seat, gaslift and foot tighten. Now you can adjust the chair to your individual needs.
| # | Part | Count |
|---|---|---|
| A | Back rest | 1x |
| B | Seat | 1x |
| C | Arm rest | 2x |
| D | Mechanism | 1x |
| E | Cover | 1x |
| F | Gas lift | 1x |
| G | Base | 1x |
| H | Castor | 5x |
| I | Screw M6x40 | 6x |
| J | Screw M6x25 | 4x |
| K | Screw M8x20 | 2x |
| L | Washer M8x14 | 14x |
| M | Spring washer | 4x |
| N | Allen wrench (M8, M6) | 2x |
| O | Screw M6x20 | 2x |
Illustration may vary from the actual product.
Remark
At first please take all parts out of the box and inspect them for possible
transport loss/damage. In order to guarantee easy setup we recommend that you
initially tigthen the
screws just enough to hold, then tighten them firmly when all screws are in
place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>