hjh OFFICE EMBASSY 200 Executive Chair Instruction Manual
- June 4, 2024
- hjh OFFICE
Table of Contents
hjh OFFICE EMBASSY 200 Executive Chair
Assembly
- Mount the mechanism into the seat.
- Mount the back rest onto the seat.
- Mount the arm rests onto the seat.
- Insert the five castors into designated holes at the bottom of the 5-star base. Insert the gaslift into the center of the base. If present, remove the plastic protective cap from the gas lift. Put the cover over the gas lift.
- Place the seat onto the gaslift.
- Repeatedly sit onto the chair, so that the connections between the seat, gaslift and foot tighten. Now you can adjust the chair to your individual needs.
See the back of this sheet for further information.
- A Back rest 1x
- B Seat 1x
- C Arm rest 2x
- D Mechanism 1x
- E Cover 1x
- F Gas lift 1x
- G Base 1x
- H Castor 5x
- I Screw M6x40 6x
- J Screw M6x25 4x
- K Screw M8x20 2x
- L Washer M8x14 14x
- M Spring washer 4x
- N Allen wrench (M8, M6) 2x
- O Screw M6x20 2x
Darstellung kann von tatsächlicher Ausführung abweichen. Illustration may vary from the actual product.
Remark
At first please take all parts out of the box and inspect them for possible
transport loss/damage. In order to guarantee easy setup we recommend that you
initially tigthen the screws just enough to hold, then tighten them firmly
when all screws are in place.
Read User Manual Online (PDF format)
Loading......