Xiaomi QTER01JY In-Ear Headphones Pro User Guide
- June 7, 2024
- Xiaomi
Table of Contents
Mi In-Ear Headphones Pro
User Guide
**Button Functions for Android Devices
**
Note: Some devices may not support it.
Button Functions for iOS Devices
Changing Earbud Tips
| 1. Select the best-fitting earbud tip
size
---|---
| 2. Flip the earbud tips inside out
| 3. Secure the earbud tips onto the
headphones
| 4. Flip the earbud tips right-side
out
FCC
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment dose cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver is connected.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
CE
Hereby, Tiinlab, declares that Wired headphone is in compliance with the essential requirement and relevant provisions of Directive 2014/30/EU.
WEEE
Electrical and electronic equipment, parts and ba eries marked with this symbol must not be disposed of with normal household wastage, it must be collected and disposed of separately to protect the environment.
Your TiinLab retailer will advise you of the correct way of disposal in your
country. Do not expose ba eries or ba ery packs to excessive heat such as
sunshine, fire or the like.
Model No.: QTER01JY
Type: In-ear
Rated Power 5mW
Cable Length: 1.25m/4.1
Speaker Impedance: 32Ω
Jack Type: 3.5mm
Frequency Range: 20-40,000Hz
Principal: Xiaomi Communications Co., Ltd.
Manufacturer: TiinLab Acoustic Technology (Shenzhen) Co., Ltd.
(a Mi Ecosystem Company)
Address: Tianliao Building F14 East Block (New Materials Industrial
Park),
Xueyuan Road, Nanshan District, Shenzhen, P.R. China
Go to www.mi.com to learn more.
This version is for private use only and should not be distributed.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>