Xiaomi LED Desk Lamp User Manual
- June 7, 2024
- Xiaomi
Table of Contents
Xiaomi LED Desk Lamp User Manual
Instruction
- Unpack the product and plug it into a power supply.
- Press the knob to turn on the light.
-
Press the knob to turn on/off the light
-
Spin the knob to adjust the brightness
-
Press and spin the knob to adjust the color temperature
FCC Compliance Statement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning
- Please confirm that the input voltage is right. The use of inappropriate voltage may damage the product and bring safety hazards.
- For indoor use only.
- Regularly check the power cord, AC adaptor, and other components . If any parts are compromised, the product should no longer be used.
- Use standard adaptors only. Misuse of adaptors may damage the product and bring safety hazards.
- Keep the product away from liquids and humid environments
- The LED module can not be replaced.
- Do not disassemble the product. The light-emitting diode may cause damage to your eyes.
Specifications
- Model: MJTD01YL
- Color temperature range: 2700-6500K
- Operating temperature : -10˚C to 40˚C
- Lamp input: 12V 0.5A
- Rated input: 100-240V~ 50/60Hz 0.2A
- Rated input power: 6W (42pcs×0.15W/LED Module)
- Wireless connectivity: Wi-Fi IEEE 802.11b/g/n 2.4GHz
- Power factor: 0.4
- Luminous flux: 300 lumens
- Life expectancy: approx. 25000h
- Operating humidity: 0%-85%RH
- Compatible with: Android & iOS
- FCC ID: 2ABEU-MJTD01YL
Product Features
-
Eye Protection
-
Adjustable brightness
-
Adjustable color temperature
-
The Focus Mode
-
Four Lighting Modes
-
On/off Timer
-
Off-delay Timer
-
Mobile Control
-
Firmware Upgrade
Smart Control
- 1. Scan the QR code below or go to App store to download Mi Home App.
- Make sure that the lamp is on. Open the application and follow the instructions in the application.
- Make sure that the Wi-Fi network is available and is able to access the Internet properly.
Factory Reset
The Reset hole is at the bottom of the lamp base. When powered on, insert a straightened tool into the hole for 5 seconds, and let go when the lamp starts to breathe. The Reset completes when the breathing stops.
- Factory Reset is required in a new network environment to reconnect the network..
Please read the user manual before using the product.
Contact Us
Go to www.mi.com to learn more.
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
Address: 10F-B4, Building B, International Innovation Park, 1 KeYuanWeiYi
Road, Laoshan, Qingdao, Shandong Province, People’s Republic of China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>