Xiaomi TDSEJ02JY Headphones User Manual
- June 7, 2024
- Xiaomi
Table of Contents
Mi Headphones User Manual
This version is for private use only and should not be distributed.
Instruction
-
Plug the connector into the headphone jack, and make sure the color of the connector and the jack are the same
-
Adjust the headband for a comfortable fit
-
Fold the hinges for an easy carry
Warning
Please do not press the ear pads with your palm. The pressure may damage the diaphragm.
Please do not force to rotate the headphones more than 45°, which mabreak the headphones bracket.
Button Functions
Incoming calls:
One-Press – Answer Hold – Decline
Playing Music:
One-Press – Pause/Play
Double Press – Track Forward
Triple Press – Track Backward
FCC
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: –Reorient or relocate the receiving antenna.–
Increase the separation
between the equipment and receiver is connected.–Connect the equipment into an
outlet on a circuit different from that to which the receiver is
connected.–Consult the dealer or an experienced radio/TV technician for help.
CE
Hereby, Tiinlab, declares that Wired headphone is in compliance with the
essential
requirement and relevant provisions of Directive 2014/30/EU.
WEEE
Electrical and electronic equipment, parts, and batteries marked with this
symbol must not be disposed of with normal household wastage, it must be
collected and disposed of separately to protect the environment.
Your TiinLab retailer will advise you of the correct way of disposal in your
country.
Do not expose batteries or battery packs to excessive heat such as sunshine,
fire, or the like.
Model: TDSEJ02JY
Type: Headphones
Speaker Impedance: 32 Ω
Weight: 240g
Cable Length: 1.4m/4.6ft
Jack Type: 3.5mm
Max Power: 50mW
Sensitivity: 107dB
Frequency Range: 20-40,000Hz
Principal: Xiaomi Communications Co., Ltd.
Manufacturer: TiinLab Acoustic Technology (Shenzhen) Co., Ltd.
(a Mi Ecosystem Company)
Address: Tianliao Building F14 East Block (New Materials Industrial Park),
Xueyuan Road, Nanshan District, Shenzhen, P.R. China
Go to www.mi.com to learn more.
This version is for private use only and should not be distributed.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>