Mouses PC374A Wireless Mouse User Manual
- June 4, 2024
- Mouses
Table of Contents
Mouses PC374A Wireless Mouse
PACKING LIST
① Mouse x l
② USB Receiver x l (Stored in battery compartment)
③ Charging cable x l
④ User Manual xl
SCHEMATIC DIAGRAM
⑤ Left key
⑥ Right key
⑦ Scroll button
⑧ Light changing key
⑨ On/off switch
⑩ Receiver
⑪ Charging port
OPERATION GUIDES
- For the first use, please charge the mouse.
- Take out the mouse and turn it on.
- Plug the receiver into the USB port of your computer. When the computer installs driver automatically, it will start to serve.
FEATURES OF THE MOUSE
- The mouse has 3 light effect and turn off modes. Short press the light changing key at the bottom to switch among light modes.
- Three DPI: 800/1200/1600, long press the left keys and the scroll button simultaneously for 3-5 seconds to switch among DPI. The factory default DPI is 1200.
- Low battery remind: When the battery is low, RGB light will turn off, and the red LED light will flash to remind. Please charge the mouse in time.
SOLUTION TO CONNECTION FAILURES
- The battery may be low, please charge the mouse in time.
- 2.4G re-code: Long press the left keys, right keys and the scroll button simultaneously for 3-5 seconds. Plug the USB receiver within 20 seconds, it will restart to work again.
NOTE:
If the product is still unworkable after above solutions, you could repeat
those steps for a few times.
FCC STATEMENT
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (l ) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase tha separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio /TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>