Mouses 226 Wireless Bluetooth Mouse User Manual
- June 6, 2024
- Mouses
Table of Contents
Mouses 226 Wireless Bluetooth Mouse
Product Overview
Specification
| Working Manner: | Bluetooth 5.0 |
|---|---|
| Button: | Left, Right, DPI |
| Working Voltage: | 4.5VDC~5.5VDC |
| Working Distance: | 10 m |
| DPI: | 1000-1200-1400-1600 |
| Backlit LED: | 7 Color Breathing Lights |
| Battery: | Rechargeable Lithium Battery |
| Size: | 113 x 58 x 26 mm |
Battery Specification
Charging Time: 2-3 H
Battery Capacity: 500 mAh
Life Time: Over 30 days
Low Power: LED blinks 1/ 2sec, stops after blinking 20 times.
- Please charge the mouse for 2 hours before the first time to use it.
- The blue light is on when charging.
- The blue light turns off automatically when fully charged.
System Requirement
① Bluetooth Mode:
- Bluetooth Version: Bluetooth 4.0 or above.
- System Requirement :Windows XP, Windows 7, Windows8, Windows 10 or later, Android 5.1 or later, Mac OS X 10.10 or later, iPad OS 13 or later.
Package
1 x Rechargeable Wireless Mouse
1 x Micro USB Charging Cable
1 x USB Receiver (Placed on the bottom of the mouse)
1 x Type c to USB adapter
1 x User Manual
1 x Warranty Card
Instructions
Bluetooth Mode
Laptop Bluetooth Mode:
① Switch from “ON/OFF” button to up (Bluetooth Mode).
②Turn on the laptop Bluetooth function: Setting – Device – Add Bluetooth or
other Device – Click Bluetooth – Sear-ching”BT5.1 Mouse”and pair.
Tablet Bluetooth Mode:
(Note: please make sure your tablet operating system is And – roid 5.0 and
later or iOS13 and later).
① Switch from “ON/OFF” button to left(Bluetooth Mode).
② Click “Settings”–“Bluetooth”–Turn on Bluetooth–Search “BT5.1 Mouse” and
pair.
Note: if the Bluetooth cannot connect the mouse or the mouse key does not
appear after connecting the Bluetooth, please activate it through this
path:Setting – Accessibility – Touch – Assistive Touch – Turn on”Mouse Key”.
Bluetooth Wireless Mouse
Frequently Asked Questions
① It’s out of power if the mouse LED lights stop. Please rech – arge it.
② After completing the first pairing of the mouse and compu- ter,you do not
need to pair it again when you use it later. Turn the mouse switch to the
position indicated by Bluetooth and double-click the right button to pair with
your computer successfully.
③ If the computer cannot find the Bluetooth mouse during pair- ing, you need
to confirm if the switch on Bluetooth mode,then power on the mouse again.
Please confirm whether the Blue- tooth mouse is connected to other computers.
If it is already connected to other computers, please remove the connection
firstly, and then follow the above steps to pair again.
④ If you don’t want to pair with the Bluetooth mouse, in the ” Bluetooth and
other devices” interface, click the BT5.1 mouse to delete the device and
select Yes.
⑤ To save power and provide long-term usage,the wireless mouse will fall
asleep after 10 minutes of no-operation. It can waken up by click any button.
⑥ If you do not use the mouse for a long time, please turn off the”OFF” button
to save power.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonableprotection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with theinstructions, may cause harmful interference to radio
communications. However, there is noguarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which canbedetermined by turning the equipment off and on, the user
is encouraged to try to correct theinterference by one or more of the
following measures: — Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without estriction