esky KF06C Wireless key Finders User Manual
- June 7, 2024
- Esky
Table of Contents
KEY FINDER
User Manual
KF06C
www.eskynow.com
Support:[email protected]
Introduction
This key finder can help you find the lost keys, remotes, purse, eyeglass,
wallet, and other easily lost items quickly.
Just one press on the color-coded button, the beep sound and flashes from the
receiver will lead you to find the lost items.
The key finder can stand on the table directly no need support.
Product Diagrams
Batteries Installation
A. Transmitter
Follow the steps below to install batteries into the transmitter.
- Remove the battery door located on the back of the transmitter.
- Install the batteries according to the (+) and (-) marks inside the battery compartment.
- Push the battery door back into place.
B. Receiver
- Press and push backward the battery door located on the back of the receiver.
- Put CR2032 battery inside. Please mind the polarity of the battery.
- Push the battery door back into place.
How to use sticker
- Choose the item from stickers you want to use and paste it on the buttons of the transmitter.
- If the items you want to find are not listed on the sticker, you can write them down on the blank sticker, and paste the sticker on the front or back area of the transmitter.
Operation
- Attach the color-coded receivers to your frequently lost items with the keyrings or double side adhesive tape.
- Press and release the corresponding color-coded button on the transmitter.
- If the receiver is in range, it will beep and meanwhile, the LED indicator will flash.
- If no beep is heard, change your location or use new batteries and press the button again.
Specification
| Working range | 15-35M |
|---|---|
| Sound | 75∼85dB |
| Frequency | 433.92MHz |
| Model No. | Battery Type |
|---|---|
| KFO6C | Receiver: CR2032 6pcs (included) Transmitter:AAA1.5V 2pcs |
FCC Statement
Changes or modificatons not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
Warning:
Do not mix used and new batteries. Don’t pile up CR2032 batteries together and
keep them away from children to avoid being swallowed by mistake.
Do not mix Alkaline, standard (carbon-zinc), or rechargeable batteries.