Esky 201-10400-57 Key Finder Instructions
- June 15, 2024
- Esky
Table of Contents
KEY FINDER
Model:ES-KF02
Manufacturer model:KFO4A
Instructions for Use
Introduction
This remote key finder can help you to find the lost keys, remotes, purse,
eyeglass, cane, and other easily lost items quickly. With just one press on
the color-coded button, the beep sound and flashes will lead you to find the
lost items.
This is an unique remote key finder with LED flashlight. The ON/ OFF switch is
located at the right side of the transmitter, which allows you to turn on and
off the LED flashlight easily, This becomes extremely handy when you need to
find something in the dark.
The key finder with base support is also a good display for your tea table, TV
bench, bed, computer desk bookshelf, etc. The transmitter is removable from
base and can be carried with you to find lost items.
Product Diagrams
Batteries Installation
A. Transmitter
Requires 2 new AAA 1.5V batteries (not included)
Follow the steps below to install batteries into the transitter.
- Remove the battery door located on the back of the transmitter
- Install the batteries according to the (+) and (-) marks inside the battery compartment
- Push the battery door back into place.
B. Receiver
Each receiver requires one CR2032 button cell battery (inclucled).
Follow the steps below to install batteries into the receivers.
- Using a small coin, insert in the slot on the battery cover and unscrew it in the arrowed direction.
- Put the battery into the battery compartment, make sure the”+’side of the battery is facing up.
- Replace the battery cover and securely screw it into place.
Installing the hook & loop tapes 
Installing new batteries
Protect the environment and respect the law. Please handle
the old battery properly. Never discard it by throwing into a garbage bin.
Do not mix old and new batteries.
Do not mix Alkaline, standard (carbon-zinc) or rechargeable batteries.
How to use?
- Attach the color-coded receivers to your frequently lost items with the key rings or double sided adhesive tape.
- Press and release the corresponding color-coded button on the transmitter.
- If the receiver is in range (30 meters), it will beep and meanwhile the LED indicator will flash.
- 1f no beep is heard, change your location or use new batteries and press the button again,
Specification
| Battery for transmitter | AAA1.5Vx2pcs (not included) |
|---|---|
| Battery for receiver | CR2032 (included) |
| Working range | 30-40 meters (open space) |
| Sound | 75-80dB |
| Frequency band | 433.92MHz |
| Maximum transmission power | 10dbm |
| Accessories | key rings (4pcs), double sided adhesive tape (4pcs) |
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Hereby, [Thousandshores Deutschland GmbH] declares that the radio equipment
type [KEY FINDER KFO4A] is in compliance with Directive 2014/53/EV.
The fulltext of the EU declaration conformity is available at the following
intemet address:
http://files.eskynow.com/201-10400-57-kf04a-endoc.pdf
Learn more about the UK Declaration of Conformity, Please click below fink to
download.
http://files.eskynow.com/201-10400-57-doc-uk.pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>