maxell Alkaline battery charger MPC-CD6V Instruction Manual
- June 7, 2024
- Maxell
Table of Contents
Alkaline battery charger MPC-CD6V Instruction Manual
■ Instruction Manual
Thank you for purchasing this MAXELL product. Before use, make sure to read this Instruction Manual and use the product correctly and safely.
■Introduction
About the user manual
-
Contents of this user manual might be changed in the future without prior notice.
-
For product improvement, a change of appearance or specification might not be announced in advance.
-
Except for personal use, any unauthorized copying of part or all parts of this manual is prohibited. Unauthorized republication is strictly prohibited.
-
The names, logos, and service marks are registered trademarks or trademarks of Maxell or other companies.
Disclaimer(Please refer to the warranty page for warranty details) -
Maxell shall not be responsible for any damage caused by fires, earthquakes, the action of a third party, any accidents, intended or unintended misuse, or another usage under normal conditions.
-
All explicit and implicit contents not stated in the warranty card are not covered.
-
Maxell shall not be responsible for failure due to any damage caused by usage other than described in the instruction manual.
-
Maxell shall not be responsible for any loss resulted from malfunction when connecting to interconnecting devices.
-
This product is not being designed to be any equipment or device which could be concerned with human life such as medical device, nuclear device, astronomic device,
transportation device, etc., nor equipment or devices which requires high reliability. In case this product is used for the above equipment and/or systems, Maxell do not responsible for any injuries or are accidents caused by the failure of this product.
■Warning (safety precautions)
- Do not modify or disassemble the product, otherwise, are, electric shock or failure may occur.
- Do not drop it, soak it in water, or heat it, otherwise, an accident may occur.
- Do not place the product with the cable connected in an enclosed area such as a bag, pocket, or bed, etc.
- Do not store the product in places subject to high temperatures, such as in a car in hot weather or in direct sunlight.
- Do not handle the product with wet hands or use it around the water.
- Before connecting the product, check that there are no residues such as liquid, dirt, or dust on the connector of the smartphone. Failure to do so may cause a short circuit, overheating, or are.
- If you encounter any overheating, strange odors, or deformation while using this product, please immediately stop using it.
- Only use AA alkaline batteries. Furthermore, do not mix new and used batteries or different brands of batteries. Doing so may cause leakage of batteries.
- If the product will not be used for a long time, remove the batteries and store it.
- Store it out of the reach of children so that they do not tamper with it.
- Do not use the product for purposes other than charging the compatible products.
①Make sure that the cable is not connected.
②Slide the battery covers and remove it.
③Remove the old batteries and insert new batteries.
④Attach the battery cover.
Recommended batteries for the device charging: Maxell AA alkaline battery
※When closing, insert the battery cover into the main unit until it clicks. When replacing batteries, use new AA alkaline batteries and replace all 6 batteries at the same time. **** Make sure the + and – terminals are oriented correctly when inserting the batteries.
■Precautions for use
-
It cannot be used if the power does not turn on at all even if pressed and holding the power button on the smartphone.
-
The supplied cable (Micro-B and Type-C) is designed exclusively, so be sure to use the supplied cables. Connecting with another cable may cause a malfunction.
-
When connecting, be sure to check the orientation of the connector. If the orientation is correct, it will connect smoothly. The forcible connection may cause an accident or malfunction.
-
Be sure to hold the housing when connecting or disconnecting the connector. Pulling the cable may cause malfunction.
-
Do not use USB Micro-B and USB Type-C connectors that have been bent. The inside of the connector may be deformed, causing a short circuit to overheat or cause fre.
-
Do not charge a device for more than 2 hours continuously. The smartphone battery may discharge and the power may not turn on.
-
Use the smartphone with the battery installed.
-
Do not use during the system update.
-
If the smartphone’s charge level does not increase after
charging, please turn ofthe power and restart it. -
Before using the product, please back up the memories, such as the phonebook, image data, music data. We shall not be liable for any incidental compensation for damages resulting from loss of various memory or loss of communication opportunities due to factors such as product failure or malfunction. Please note before use.
-
If the payment function (Osaifu-Keitai) becomes unusable, we shall not be able to take any responsibility.
-
The illustrations of the product and accessories described in “How to use” in this manual may differ slightly from the actual products. Thank you for your understanding.
■Specifications
Main Unit
Dimensions: W63×H108×T18.4mm
Output(USB-A):DC5V / Max1A
Weight: Approx. 49g(excluding batteryandcable)
Operating temperature range:5~35˚C
Storage temperature range:0~40˚CAccessories
Charging Cable: USB-AーMicro-B+Type-C approx. 100cm
AA Alkaline battery: Maxell LR6(T)/1.5V
■Compatible models
The product is compatible with smartphone models that charge using a USB Micro-B or USB type-C connecter. ※ The product cannot be used for models that charge using connectors of other shapes or devices with a battery capacity equal to or higher than the tablet.
■ How to use
・How to charge your smartphone
① Connect the supplied cable to the main unit.
②Charging will start when the product is connected to the smartphone charging
connector.※It is not possible to charge a smartphone with a USB Micro-B
connector and a smartphone with a USB Type-C connector at the same time.
※iPhone can be charged with a genuine Apple cable.
Plugging the cable into the charger will reduce the battery level, so be sure
to disconnect the cable after use.
For Micro-B Connector
For Type-C Connector
■Battery replacement procedure
The product can be used repeatedly by replacing the batteries. If the LED
indicator that indicate the energization state does not light even after
connecting the supplied cable or
genuine Apple cable, please replace the batteries according to the following
procedure.
Maxell, Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
PA1721-00
Documents / Resources
|
maxell Alkaline battery charger MPC-
CD6V
[pdf] Instruction Manual
Alkaline battery charger MPC-CD6V, Alkaline battery charger, MPC-CD6V
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>